Abstract
Amorphous TiNiCu alloys with copper contents of 28 to 38 at % are fabricated via melt spinning. The isothermal crystallization of alloys is conducted at 500°C with variable durations of the heat treatment (100 to 300 s). It is shown that shortening the duration of crystallization prevents the formation of brittle phases of the Ti–Cu system and contributes to the martensitic B2 ↔ B19 transformation, with the temperature intervals of transformation shifting to higher values and a marked increase in the enthalpy of the martensitic transitions and the magnitude of the shape memory effect.
Similar content being viewed by others
References
Nespoli, A., Besseghini, S., Pittaccio, S., et al., Sens. Actuators, A, 2010, vol. 158, p. 149.
Jani, J.M., Leary, M., Subic, A., and Gibson, M.A., Mater. Des., 2014, vol. 56, p. 1078.
Morgiel, J., Cesari, E., Pons, J., et al., J. Mater. Sci., 2002, vol. 37, p. 5319.
Potapov, P.L., Kulkova, S.E., Shelyakov, A.V., et al., J. Phys. IV, 2003, vol. 112, p. 727.
Shelyakov, A.V., Sitnikov, N.N., Menushenkov, A.P., et al., Thin Solid Films, 2011, vol. 519, p. 5314.
Chang, S.H., Wu, S.K., and Kimura, H., Intermetallics, 2007, vol. 15, p. 233.
Shelyakov, A.V., Sitnikov, N.N., Menushenkov, A.P., Rizakhanov, R.N., and Ashmarin, A.A., Bull. Russ. Acad. Sci.: Phys., 2015, vol. 79, no. 9, p. 1134.
Shelyakov, A.V., Matveeva, N.M., and Larin, S.G., in Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications, Trochu, F. and Brailovski, V., Eds., Canadian Inst. of Mining, Metallurgy and Petroleum, 1999, p. 295.
Sitnikov, N.N., Shelyakov, A.V., Khabibullina, I.A., Mitina, N.A., and Resnina, N.N., Inorg. Mater.: Appl. Res., 2018, vol. 9, no. 2, p. 279.
Pushin, V.G., Volkova, S.B., and Matveeva, N.M., Phys. Met. Metallogr., 1997, vol. 83, no. 4, p. 435.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.N. Sitnikov, A.V. Shelyakov, I.A. Khabibullina, N.A. Mitina, 2018, published in Izvestiya Rossiiskoi Akademii Nauk, Seriya Fizicheskaya, 2018, Vol. 82, No. 9, pp. 1219–1225.
About this article
Cite this article
Sitnikov, N.N., Shelyakov, A.V., Khabibullina, I.A. et al. Effect of the Conditions of Crystallization of Rapidly Quenched TiNiCu Amorphous Alloys with High Copper Contents on the Characteristics of Martensite Transformations and Shape Memory Effect. Bull. Russ. Acad. Sci. Phys. 82, 1106–1112 (2018). https://doi.org/10.3103/S1062873818090216
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1062873818090216