Abstract
A model for the analytical calculations of the mean bulk temperature of plastic deformation when applying the pulse current has been developed to calculate the contact temperatures in the areas of adhesion and sliding of a roll relative to the rolled strip.
Similar content being viewed by others
REFERENCES
Troitskii, O.A., Baranov, Yu.V., Avraamov, Yu.S., and Shlyapin, A.D., Fizicheskie osnovy i tekhnologii obrabotki sovremennykh materialov (Physical Foundations and Technologies of Processing of Modern Materials), Moscow: Inst. Komp’yut. Issled., 2004, vol. 1.
Thiesen, P.A., Physikalisch-chemische Untersuchungen tribomechnischer Vorgänge, Z. Chem., 1965, vol. 5, no. 5, pp. 162–171. https://doi.org/10.1002/zfch.19650050503
Baranov, Yu.V., Troitskii, O.A., Avraamov, Yu.S., and Shlyapin, A.D., Fizicheskie osnovy elektroimpul’snoi i elektroplasticheskoi obrabotok i novye materialy (Physical Foundations of Electropulse and Electroplastic Processing and New Materials), Moscow: Mosk. Gos. Ind. Univ., 2001.
Tselikov, A.I., Osnovy teorii prokatki (Foundations of the Rolling Theory), Moscow: Metallurgiya, 1965.
Fomin, A.A., Gusev, V.G., and Timerbaev, N.F., The processing of the profile surface of the work-pieces, characterized by low rigidity, Solid State Phenom., 2020, vol. 299, pp. 852–860. https://doi.org/10.4028/www.scientific.net/SSP.299.852
Keropyan, A., Gerasimova, A., and Goloshapov, K., Influence of the track gradient on the contact temperature at the wheel-rail zone for open-pit locomotives, MATEC Web Conf., 2017, vol. 129, p. 06009. https://doi.org/10.1051/matecconf/201712906009
Basyrov, I.I. and Bardovsky, A.D., Innovative crushing technique and vertical roll crusher design, Gornyi Inf.-Anal. Byull. (Nauchn.-Tekh. Zh.), 2020, no. 2, pp. 121–129. https://doi.org/10.25018/0236-1493-2020-2-0-121-129
Kolikov, A.P. and Rumyantsev, B.A., Teoriya obrabotki metallov davleniem: Uchebnoe posobie (Theory of Metal Forming), Moscow: Mosk. Inst. Stali i Splavov, 2015.
Unksov, E.P., Inzhenernaya teoriya plastichnosti (Engineering Theory of Plasticity), Moscow: Mashgiz, 1959.
Tyurin, V.A. and Mokhov, A.I., Teoriya obrabotki metallov davleniem. Uchebnik dlya vuzov (Theory of Metal Forming: Textbook for Universities), Volgograd: Volgograd. Gos. Tekh. Univ., 2000.
Ugurchiev, U.Kh. and Novikova, N.N., Comparative analysis of measuring the thermal effect during extension without a current and with a current, J. Mach. Manuf. Reliab., 2021, vol. 50, no. 5, pp. 469–473. https://doi.org/10.3103/S1052618821050137
Albagachiev, A.Yu., Keropyan, A.M., Gerasimova, A.A., and Kobelev, O.A., Determination of rational friction temperature in lengthwise rolling, CIS Iron Steel Rev., 2020, vol. 19, pp. 33–36. https://doi.org/10.17580/cisisr.2020.01.07
Polukhin, P.I., Nikolaev, V.A., Polukhin, V.P., Zinov’ev, A.V., and Kosarimov, E.N., Kontaktnoe vzaimodeistvie metalla i instrumenta pri prokatke (Contact Interaction of Metal and Tool at Rolling), Moscow: Metallurgiya, 1974.
Fomin, A.A. and Gusev, V.G., Safe machining of blanks with nonuniform properties, Russ. Eng. Res., 2013, vol. 33, no. 10, pp. 602–606. https://doi.org/10.3103/S1068798X13100043
Gerasimova, A., Mishedchenko, O., and Devyatiarova, V., Determination of temperature conditions for steel plate rolling at Vyksa Steel Works (AO VMZ), IOP Conf. Series: Mater. Sci. Eng., 2020, vol. 709, p. 022016. https://doi.org/10.1088/1757-899X/709/2/022016
Gorbatyuk, S.M., Pavlov, S.M., Shapoval, A.N., and Gorbatyuk, S.M., Experimental use of rotary rolling mills to deform compacts of refractory metals, Metallurgist, 1998, vol. 42, no. 5, pp. 178–183. https://doi.org/10.1007/BF02766359
Holm, R., Electric Contacts: Theory and Application, Berlin: Springer, 1961. https://doi.org/10.1007/978-3-662-06688-1
Gorbatyuk, S.M., Gerasimova, A.A., and Radyuk, A.G., Using the coating for the diffusion layer obtaining on the walls of the mold (CCM), Metall. Min. Ind., 2015, no. 9, pp. 1085–1088.
Artiukh, V., Mazur, V., and Adamtsevich, A., Priority influence of horizontal forces at rolling on operation of main sheet rolling equipment, MATEC Web Conf., 2017, vol. 106, p. 04001. https://doi.org/10.1051/matecconf/201710604001
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by M. Astrov
About this article
Cite this article
Ugurchiev, U.K., Novikova, N.N. Features of the Analytical Method to Determine the Temperature during Electroplastic Rolling. J. Mach. Manuf. Reliab. 51 (Suppl 1), S79–S83 (2022). https://doi.org/10.3103/S1052618822090187
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618822090187