Abstract
In this paper, analysis of influence of residual stresses in the surface layer of cylindrical friction pairs on the operational wear resistance index is carried out. Stresses of the first kind after application of combined machining are investigated. Combined machining is consecutive electromechanical machining and diamond burnishing. A formula for calculation of residual stresses originating in the surface layer after the combined machining is obtained. For computational convenience, a computer program calculating the residual stress parameter is written in Visual studio 2017 C#. The combined machining method creates a potential for improving performance indices due to creation of compressive residual stresses.
Similar content being viewed by others
REFERENCES
Pozdeev, A.A., Nyashin, Yu.I., and Trusov, P.V., Ostatochnye napryazheniya: teoriya i prilozhenie (Residual Stresses: Theory and Application), Moscow, 1982.
Kosarev, V.A., Azikov, N.S., and Alipov, A.E., A method for solution of physically nonlinear problems of structural strength with stress risers, Aviats. Prom-st', 2014, no. 2, p. 26.
Guo, X., Leung, A.Y.T., Chen, A.Y., Ruan, H.H., and Lu, J., Investigation of non-local cracking in layered stainless steel with nanostructured interface, Scr. Mater., 2010, vol. 63, no. 4, p. 403.
Haghpanah, B., Nayeb-Hashemi, H., and Vaziri, A., Elasto-plastic stresses in a functionally graded rotating disk, ASME J. Eng. Mater. Technol., 2012, vol. 134, no. 2, p. 021004.
Li, D.F., Li, C.F., Shu, S.Q., Wang, Z.X., and Lu, J., A fast and accurate analysis of the interacting cracks in linear elastic solids, Int. J. Fract., 2008, vol. 151, p. 169.
Azikov, N.S. and Gaidarzhi, Yu.V., Load-carrying capacity of skew composite panels, Konstrukts. Kompoz. Mater., 2015, no. 1 (137), p. 3.
Birger, I.A., Ostatochnye napryazheniya (Residual Stress), 2nd ed., Moscow: LENAND, 2015.
Albagachiev, A.Yu. and Preobrazhenskaya, E.V., Research of residual stresses during joint finishing and hardening processing of machine parts, in Materialy nauchno-tekhnicheskoi konferentsii MGAPI Novye materialy i tekhnologii (Proceedings of the Conference of SAIECS on New Materials and Technologies), Moscow, 2001, p. 19.
Yakovleva, A.P., Analysis of the properties of steel parts surface layer strengthened by electromechanical processing, Aviats. Prom-st', 2012, no. 2, p. 8.
Yakovleva, A.P., Increasing the life of friction pairs of metal cutting equipment, in Mashinostroenie: innovatsionnye aspekty razvitiya, Materialy I mezhdunarodnoi nauchno-prakticheskoi konferentsii (Proceedings of the 1st International Conference on Engineering: Innovative Aspects of Development), 2018, p. 102.
Yakovleva, A.P., Efficacy of integration on lathes CNC, Sprav. Inzhen. Zh., 2018, no. 11, p. 36. https://doi.org/10.14489/hb.2018.11.Đ.036
Suslov, A.G., Part surface engineering - a reserve to increase the competitiveness of machines, Sprav. Inzhen. Zh., 2001, no. 4.
Bez"yazychnyi, V.F., The effect of the quality of the surface layer after machining on the operational properties of machine parts, Sprav. Inzhen. Zh., 2001, no. 4, p. 9.
Suslov, A.G., Technological support and improvement of operational properties of machine parts, technological equipment and tools, Sprav. Inzhen. Zh., 2000, no. 1, p. 6.
Albagachiev, A.Yu. and Irevli, S.V., Effektivnye tekhnologicheskie metody obespecheniya kachestva detalei mashin (Effective Technological Methods for Ensuring the Quality of Machine Parts), Moscow: MGAPI, 2002.
Albagachiev, A.Yu. and Irevli, S.V., Resource-saving method for processing machine parts, in Sbornik trudov mezhdunarodnoi nauchno-prakticheskoi konferentsii Proizvodstvo-tekhnologiya-ekologiya (Proceedings of the International Conference on Production Technology Ecology), Moscow: MGTU STANKIN, 2008, vol. 1, p. 15.
Fadeev, P.L. and Albagachiev, A.Yu., Povyshenie nadezhnosti detalei mashin (Improving the Reliability of Machine Parts), Moscow: Mashinostroenie, 1993.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare they have no conflict of interest.
Additional information
Translated by N. Semenova
About this article
Cite this article
Yakovleva, A.P., Albagachiev, A.Y. Theoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs. J. Mach. Manuf. Reliab. 49, 237–242 (2020). https://doi.org/10.3103/S1052618820020144
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618820020144