Abstract
Evaluation of the structural feasibility of folded fillers is a promising line of research aimed at their wider application in machine building design and construction. With all its evident advantages, such as high rigidity, good sound damping, and condensate removal, certain structures have drawbacks as well, such as the small area of filler surface adhesion to skin during panel gluing. This paper considers the simulation process for folded filler with flat contact faces used for gluing to skin, which makes it possible to improve the strength performance of sandwich panels.
Similar content being viewed by others
References
Zakirov, I.M. and Alekseev, K.A., The way to determine parameters of tetraradiate helical folded structure, Izv. Vyssh. Uchebn. Zaved. Aviats. Tekhn., 2005, no. 4, pp. 57–61.
Zakirov, I.M. and Kataev, Yu.P., Geometry of folded structure consisting of different-widthness bands, Mater. Vseros. nauchno-prakt. konf. “Aviakosmicheskie tekhnologii i oborudovanie” (Proc. All-Russ. Sci.-Pract. Conf. “Aerospace Technologies and Equipment”), Kazan: Kazan. Gos. Tekh. Univ., 2004). pp. 59–62.
Khaliulin, V.I., Geometrical simulation for synthesizing structure of folded fillers for multilayered panels, Vestn. Kazan. Gos. Tekh. Univ. im. A.N. Tupoleva, 1995, no. 1, pp. 31–40.
Batrakov, V.V., Cyclic formation of the aircraft panels’ folded filler shape, Cand. Sci. (Eng.) Dissertation, Kazan: Kazan Natl. Res. Tech. Univ. named after A.N. Tupolev, 2006).
Elsayed, E.A. and Basily, B.B., A continuous folding process for sheet materials, Int. J. Mater. Product Technol., 2004, vol. 21, nos. 1/2/3, pp. 217–238.
Kling, D.H., Double periodic flat surfaces in three-space, PhD Thesis, Rutger: State Univ. of New Jersey, 1997).
Zakirov, I.M., Kataev, Yu.P., and Alekseev, K.A., The way to calculate geometrical parameters of curvilinear folded structures shape, Vestn. Kazan. Gos. Tekh. Univ. im. A.N. Tupoleva, 2005, no. 2, pp. 11–13.
Kling, D.H. and Elsayed, E.A., Double periodic folded surfaces and their applications, Proc. Int. Conf. on Computers and Industrial Engineering, March 5–7, 2001. Cocoa Beach, FL, 2001, pp. 156–159.
Kling, D.H., USA Patent 6935997 G06T 17/20, 2005.
Khaliulin, V.I., Tekhnologicheskie skhemy izgotovleniya mnogosloinykh konstruktsii (Technological Schemes for Manufacturing Multilayered Structures), Kazan: Kazan. Nats. Issled. Tekh. Univ. im. A.N. Tupoleva, 1999).
Alekseev, K.A. and Zakirov, I.M., Folded structures, in Geometricheskoe modelirovanie i avtomatizirovannoe proektirovanie (Geometrical Simulation and Automated Design), Kazan: Fen, 2010).
Zakirov, I.M. and Kataev, Yu.P., Geometry of folded chevron structures and the flexure lines marked on the initial sheet, J. Mach. Manuf. Reliab., 2006, vol. 35, no. 1, p. 51.
Ishlinskii, A.Yu., Bol’shoi entsiklopedicheskii politekhnicheskii slovar’ (Grand Polytechnic Encyclopedia), Moscow: Sovetskaya Entsiklopediya, 1989).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.A. Alekseev, N.M. Faizullina, 2016, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2016, No. 2, pp. 92–96.
About this article
Cite this article
Alekseev, K.A., Faizullina, N.M. Development of a folded filler model with contact flat faces. J. Mach. Manuf. Reliab. 45, 173–177 (2016). https://doi.org/10.3103/S1052618816020023
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618816020023