Abstract
A dependence of elastic deformation on the load in the linear contact of hardened steel parts obtained on the basis of experimental data is presented. A method for calculating the load in a radial roller bearing at various clearances and numbers of rollers, as well as with various arrangements of the rollers relative to the external load vector is described. It is shown that, at a regulated radial clearance, almost no vibration in the bearing resulting from load redistribution during its rotation occurs; the vibration increases proportionally to the clearance caused by wear. Some possibilities of reducing the vibrations are discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Belyaev, N.M., Trudy po teorii uprugosti i plastichnosti (Works on Plasticity and Elasticity Theory), Moscow: Gos. izd. tekhn.-teoret. lit., 1957.
Sundberg, J., Elastische Berührung Zweier Halbrüme, Forasch. Gebicte Ingenierweaens, 1939, vol. 10, no. 5, pp. 201–211.
Roark, R., Formulas for Stress and Strain, New York: Mc. Graw-Hill, 1965, p. 320.
Dawson, D. and Higginson, J.R., The theory of rolling bearing lubrication and deformation, Proc. Inst. Mech. Engs., 1963, vol. 177, pp. 67–69.
Palmgren, A., Ball and Roller Bearing Engineering, Philadelfia: S.H. Burbank and Co., 1959, p. 505.
Orlov, A.V., Wear-caused dynamic loadings in ball bearings, Vestn. Mashinostr., 2013, no. 1.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.V. Orlov, 2013, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2013, No. 4, pp. 63–69.
About this article
Cite this article
Orlov, A.V. Wear-induced vibration in a radial roller bearing. J. Mach. Manuf. Reliab. 42, 312–318 (2013). https://doi.org/10.3103/S1052618813040110
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618813040110