Abstract
The results of the application of nanostructured titanium alloys, in particular the VT6 alloy, for the manufacture of hollow structures by superplastic forming and by a method combining it with pressure welding, are presented. Possibilities of the application of nanostructured titanium alloys are shown by the example of the formation of dome-shaped shells, models of a hollow blade of a jet engine fan, and weld-fabricated semi products.
Similar content being viewed by others
References
Alferov, Zh.I., Aseev, A.L., Gaponov, S.V. et al., Nanomaterials and Nanotechnologies, Nanotekhnol. Zondovaya Mikroskopiya, 2003, no. 8, pp. 3–13.
Nazarov, A.A. and Mulyukov, R.R., Nanostructured Materials, in Handbook of Nanoscience, Engineering, and Technology, Goddard, W., Brenner, D., Lyshevsk, S., and Iafrate, G., Eds., CRC Press, 2002.
Valiev, R.Z., Kaibyshev, O.A., Kuznetsov, R.I., Musalimov, R.Sh., and Tsenev, N.K., Low-Temperature Super-plasticity of Metallic Materials, Dokl. Akad. Nauk SSSR, 1988, vol. 301, no. 4, pp. 864–866.
Zherebtsov, S.V., Galeev, R.M., Valiakhmetov, O.P., Malysheva, S.P., Salishchev, G.A., and Myshlyaev, M.M., Forming of a Submicrocrystalline Structure in Titanium Alloys by Intense Plastic Deformation, Kuznechno-Shtampovochnoe Proizvod., 1999, no. 7, pp. 17–22.
Laycock, D.B., Superplastic Forming of Sheet Metal, in Superplastic Forming of Structural Alloys, Paton, N.E. and Hamilton, C.H., Eds., TMS-AIME, Warrendale, PA, 1982, pp. 257–271.
Comley, P.N., Lowering the Heat—The Development of Reduced SPF Temperature Titanium Alloys for Aircraft Production, Mater. Sci. Forum, 2004, vol. 447–448, p. 233.
Aleksandrov, V.K., Anoshkin, N.F., Bochvar, G.A. et al., Polufabrikaty iz titanovykh splavov (Semi-Products of Titanium Alloys), Moscow: Metallurgiya, 1979.
Kruglov, A.A., Lutfullin, R.Ya., Mukhametrakhimov, M.Kh, Rudenko, O.A., and Safiullin, R.V., Mean Grain Size in the Titanium Alloy VT6 and Selection of Efficient Chart of the Integral Process of Plastic Forming and Pressure Welding, Perspekt. Mater., 2005, no. 6, pp. 79–85.
Lutfullin, R.Ya., Kaibyshev, O.A., Valiakhmetov, O.P., Mukhametrakhimov, M.Kh., Safiullin, R.V., and Mulyukov, R.R., Solid-State Bonding of Nanocrystalline Titanium Alloys, Perspekt. Mater., 2003, no. 4, pp. 21–25.
Kaibyshev, O.A., Lutfullin, R.Ya., and Berdin, V.K., Mechanism of Formation of Solid-State Bonding in the Superplasticity State, Dokl. Akad. Nauk SSSR, 1991, vol. 319, no. 3, pp. 615–618.
Kaibyshev, O.A., Galimov, A.K., Kruglov, A.A., Lutfullin, R.Ya., and Safiullin, R.V., Numerical Analysis of Variants for Structure of a Hollow Fan Blade, Probl. Mashinostr. Nadezhnosti Mashin, 2004, no.1, pp. 90–95.
Rudenko, O.A., Kruglov, A.A., Safiullin, R.V., Valiakhmetov, O.R., and Lutfullin, R.Ya., Application of the Low-Temperature Superplasticity Effect in the Superplastic Forming Technique, Kuznechno-Shtampovochnoe Proizdov. Obrab. Mater. Davleniem, 2006 no. 4, pp. 5–9.
Kaibyshev, O.A., Kruglov, A.A., and Lutfullin, R.Ya., RF Patent 2291019, Byull. Izobret., 2007, no. 1.
Ishlinskii, A.Yu. and Ivlev, D.D., Matematicheskaya teoriya plastichnosti (Mathematical Theory of Plasticity), Moscow: Fizmatlit, 2001.
Kaibyshev, O.A., Kruglov, A.A., Safiullin, R.V., Lutfullin, R.Ya., and Astanin, V.V., RF Patent 2233683, Byull. Izobret., 2004, no. 22.
Pashkevich, A.G., Orekhov, A.V., Sadkov, V.V., Rostkovskii, I.G., and Smirnov, V.A., USSR Inventor’s Certificate no. 1255344, Byull. Izobret., 1986, no. 33.
Glazunov, S.G. and Moiseev, V.N., Konstruktsionnye titanovye splavy (Structural Titanium Alloys), Moscow: Metallurgiya, 1974.
Kaibyshev, O.A., Kruglov, A.A., Lutfullin, R.Ya., Gerasimenko, S.N., and Mukhametrakhimov, M.Kh., Preparation of Equal-in-Strength Spherical Vessels with Application of Superplastic Deformation, Probl. Mashinostr. Nadezhnosti Mashin, 2005, no. 5, pp. 94–97.
Additional information
Original Russian Text © A.A. Kruglov, R.Ya. Lutfullin, 2009, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2009, No. 1, pp. 69–72.
About this article
Cite this article
Kruglov, A.A., Lutfullin, R.Y. Prospects for the application of nanostructured titanium alloys in mechanical engineering. J. Mach. Manuf. Reliab. 38, 58–61 (2009). https://doi.org/10.3103/S1052618809010117
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618809010117