Skip to main content
SpringerLink
Log in

Study of Changes in the Shape of a Pipe Blank Taking into Account the Peculiarities of Contact Interaction with a Deforming Tool during JCOE Molding in the TESA 1420 Line

  • Published:
Steel in Translation Aims and scope

Abstract

Applications and large diameter pipe production facilities around the world are presented. The advantages and disadvantages of pipe production using the JCOE scheme in comparison with the UOE and RBE methods are highlighted. The results of studies of the shape change of a pipe blank during step molding according to the JCO scheme are presented. During the experimental study, a camera was used for photography with further processing in CAD and a photogrammetry system. Based on the results of the experimental study, the coordinates of the points for each step and after final molding, radii along the perimeter of the workpiece, contact and non-contact areas were determined. Modeling of the step molding process was carried out in the DEFORM software package in a flat coordinate system. Based on the results of mathematical modeling, the features of the contact interaction of the workpiece with the deforming tool in the deformation zone were determined and a method for calculating geometric parameters was developed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.

REFERENCES

  1. Borozdin, A.N., Peculiarities of development of oil extraction and pipe industry as an object for revealing strategic reference marks and their interaction, Vestn. Univ., 2016, no. 4, pp. 5–11.

  2. Volkova, S.V. and Gubarev, A.V., Problems of introducing the concept of sparing production in pipe industry and paths of its solution, Sovrem. Naukoemkie Tekhnol., 2018, no. 10, pp. 27–31.

  3. Lifanov, V.Ya., Pipe industry: Today and tomorrow, Metallurg, 2018, no. 10, pp. 84–89.

  4. Matveev, Yu.M., Teoreticheskie osnovy proizvodstva svarnykh trub (Theoretical Foundations of Welded Pipe Production), Moscow: Metallurgiya, 1967.

  5. Takekazu, A., Kimihiro, N., Koji, Ya., and Nobuhisa, S., Development of high performance UOE pipe for linepipe, JFE Technical Report, 2013, no. 18, pp. 23–35.

  6. Shelest, A.E., Yusupov, V.S., Karelin, R.D., and Perkas, M.M., Geometric and deformation parameters of elastoplastic alternating bending of a strip during processing on a roller straightening machine, Russ. Metall., 2022, vol. 2022, no. 5, pp. 546–551. https://doi.org/10.1134/s0036029522050093

    Article  ADS  Google Scholar 

  7. Yusupov, V.S., Kolobov, A.V., Akopyan, K.E., Seleznev, M.S., and Sominin, M.A., Improving the production of electrowelded straight-seam pipe. Part 2, Steel Transl., 2015, vol. 45, no. 12, pp. 975–977. https://doi.org/10.3103/s0967091215120165

    Article  Google Scholar 

  8. SMS Group Newsletter, 2012, no. 1, pp. 16–17.

  9. Chichenev, N.A., Chicheneva, O.N., Karfidov, A.O., and Pashkov, A.N., Selection of laser processing parameters for hot stamping tools based on mathematical planning of the experiment, CIS Iron Steel Rev., 2021, no. 22, pp. 37–40. https://doi.org/10.17580/cisisr.2021.02.07

  10. Chicheneva, O.N., Chichenev, N.A., Pashkov, A.N., Gorovaya, T.Yu., and Vasiliev, M.V., Influence of electroplastic deformation on the deformation resistance of refractory metals, Metallurgist, 2022, vol. 66, nos. 5–6, pp. 657–662. https://doi.org/10.1007/s11015-022-01373-4

    Article  CAS  Google Scholar 

  11. Samusev, S.V., Romantsov, A.I., Zhigunov, K.L., Lyuskin, A.V., and Sigida, M.S., Parameters of the edge-bending press in the TESA-1420 pipe-rolling line at OAO Chelyabinskii Truboprokatnyi Zavod, Steel Transl., 2011, vol. 42, no. 1, pp. 9–13. https://doi.org/10.3103/s0967091212010159

    Article  Google Scholar 

  12. Tovmasyan, M.A. and Samusev, S.V., Analysis of the change in the shape of large diameter pipes during assembly and welding, Chern. Met., 2022, no. 3, pp. 33–38. https://doi.org/10.17580/chm.2022.03.06

  13. Tovmasyan, M.A., Samusev, S.V., and Fortunatov, A.N., Comprehensive study of the shaping of the near-edge zone in flat rolled products during the production of pipes for main pipelines using modern calculation and measurement methods, Russ. Metall., 2022, vol. 2022, no. 7, pp. 784–790. https://doi.org/10.1134/s0036029522070138

    Article  ADS  Google Scholar 

  14. Tovmasyan, M.A. and Samusev, S.V., Method of stepwise formation of large-diameter pipes, RF Patent 2702666, Byull. Izobret., 2006, no. 28.

Download references

Funding

This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.

Author information

Authors and Affiliations

  1. FSAEI HE “National Research Technological University “MISiS”, Vyksa Branch, 607036, Vyksa, Nizhny Novgorod Region, Russia

    M. A. Tovmasyan

  2. FSAEI HE “National Research Technological University “MISiS”, 119049, Moscow, Russia

    S. V. Samsuev, T. Yu. Sidorova & V. T. Nguen

Authors
  1. M. A. Tovmasyan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. V. Samsuev
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. T. Yu. Sidorova
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. V. T. Nguen
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. V. Samsuev.

Ethics declarations

The authors of this work declare that they have no conflicts of interest.

Additional information

Translated by K. Gumerov

Publisher’s Note.

Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tovmasyan, M.A., Samsuev, S.V., Sidorova, T.Y. et al. Study of Changes in the Shape of a Pipe Blank Taking into Account the Peculiarities of Contact Interaction with a Deforming Tool during JCOE Molding in the TESA 1420 Line. Steel Transl. 53, 938–944 (2023). https://doi.org/10.3103/S0967091223110323

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0967091223110323

Keywords:

Search

Navigation