Abstract
In order to study the influence of technological factors on the nature of forming and the risk of metal fracture, problems of computer modeling of the process of continuous pipe rolling on the Fine Quality Mill (FQM) are formulated and solved. The solution of the problems has made it possible to assess the nature of the influence of deviation of rolling axes of the continuous mill and the extracting mill. The results of the research have made it possible to formulate and propose technical solutions to minimize the probability of risk defect.
REFERENCES
Toporov, V.A., Pyatkov, V.L., and P’yankov, B.G., Mastering of TPA with continuous mill FQM at the Seversk pipe factory, Innovatsii i importozameshchenie v trubnoi promyshlennosti (Truby-2016). Trudy XXII Mezhdunarodnoi nauchno-prakticheskoi konferentsii (Innovations and Import Substitution in Pipe Industry (Truby-2016): Proc. 22nd Int. Sci.-Pract. Conf.), Pyshmintsev, I.Yu., Ed., 2016, pp. 16–19.
Teelen, N., Rinal’di, P., and Milaneze, D., PQF technology for producing steel seamless pipes, Chern. Met., 2005, no. 4, pp. 47–52.
Shkuratov, E.A. and Vydrin, A.V., Improvement of the technology for hollow shell longitudinal rolling in continuous rolling mills, Chern. Met., 2017, no. 3, pp. 42–46.
Alyutin, M.D. and Shirokov, V.V., Push benches and prospects of their application, Metallurgist, 2019, vol. 62, nos. 9–10, pp. 1062–1067. https://doi.org/10.1007/s11015-019-00754-6
Glazunova, N.A., Rozhkova, O.V., and Kovaleva, I.A., Classification by types of guide scratch defect at the inner surface of hot-rolled pipes, Lit’e Metall., 2014, no. 1, pp. 28–32.
Pravosudovich, V.V., Sokurenko, V.P., Danchenko, V.N., et al., Defekty stal’nykh slitkov i prokata. Spravochnoe izdanie (Defects in Steel Ingots and Rolled Products: Reference Book), Moscow: Intermet Inzhiniring, 2006.
Vavilkin, N.N. and Krasikov, A.V., Studies of deformation and kinematic parameters of pipe rolling-off at continuous mill, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2009, no. 11, pp. 22–25.
Shkuratov, E.A., P’yankov, B.G., Bushin, R.O., Panasenko, O.A., et al., Peculiarities of determining the technological axis of continuous pipe rolling mill with three-roller grooves, Innovatsii i importozameshchenie v trubnoi promyshlennosti (Truby-2016). Trudy XXII Mezhdunarodnoi nauchno-prakticheskoi konferentsii (Innovations and Import Substitution in Pipe Industry (Truby-2016): Proc. 22nd Int. Sci.-Pract. Conf.), Pyshmintsev, I.Yu., Ed., 2016, pp. 206–210.
Panasenko, O.A., Shkuratov, E.A., Belov, O.I., P’yankov, A.G., P’yankov, K.P., Struin, D.O., Chernykh, I.N., and Sarafanova, O.E., Improvement of the axial adjustment of the equipment of fine quality mill on the basis of contactless measuring 3D Systems, Metallurgist, 2019, vol. 63, nos. 7–8, pp. 690–694. https://doi.org/10.1007/s11015-019-00878-9
Technological guideline STZ 004-024-2019: Rolling of seamless pipes in the line of continuous FQM mill, Polevskoi, Sverdlovsk oblast, 2016.
Shi, J., Yu, W., Dong, E., and Wang, J., Finite element simulation for hot continuous-rolled TC4 alloy seamless pipe, Advances in Materials Processing. CMC 2017, Han, Y., Ed., Lecture Notes in Mechanical Engineering, Singapore: Springer, 2018, pp. 705–716. https://doi.org/10.1007/978-981-13-0107-0_67
Osadchii, V.Ya. and Kolikov, A.P., Proizvodstvo i kachestvo stal’nykh trub. Uchebnoe posobie dlya vuzov (Production and Quality of Steel Pipes: Textbook for Universities), Osadchii, V.Ya., Ed., Moscow: Mosk. Gos. Univ. Priborostr. i Informatiki, 2012.
Kolikov, K.S., Kaledina, N.O., and Kobylkin, S.S., Teoriya obrabotki metallov davleniem (Theory of Metal Forming), Moscow: Mosk. Inst. Stali i Splavov, 2015.
Kolbasnikov, N.G., Mishin, V.V., Shishov, I.A., Matveev, M.A., and Korchagin, A.M., Surface-crack formation in the manufacture of microalloyed steel pipe, Steel Transl., 2016, vol. 46, no. 9, pp. 665–670. https://doi.org/10.3103/s0967091216090035
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by O. Pismenov
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Toporov, V.A., Ibragimov, P.A., Panasenko, O.A. et al. Development of the Mathematical Model of Continuous Pipe Rolling and Study of the Influence of Technological Factors on the Formation of Surface Defects. Steel Transl. 53, 978–982 (2023). https://doi.org/10.3103/S0967091223110311
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091223110311