Abstract
Experimental studies of force plunge grinding were carried out to obtain the components of cutting forces and temperature in the contact zone of the grinding wheel with the workpiece. Experimental data were obtained on the dependence of cutting force and temperature in the contact zone of a part and the grinding wheel during power plunge grinding on the transverse feed and rotation speed of a part.
REFERENCES
Strategies of development of timber complex of the Russian Federation to 2030 (approved by the Decree of the Government of the Russian Federation dated February 11, 2021, no. 312-r).
Chernoivanov V.I., G.I.G., Organizatsiya i tekhnologiya vosstanovleniya detalei mashin (Organization and Technology of Machine Element Restoration), Moscow: Rosinformagrotekh, 2016.
Apatenko, A.S., Bykov, V.V., Golubev, I.G., Golubev, M.I., and Evgrafov, V.A., Tekhnologiya i organizatsiya vosstanovleniya detalei i sborochnykh edinits pri servisnom soprovozhdenii. Chast’ 2 (Technology and Organization of Restoration of Machine Elements and Assembly Units at Service Support, Part 2), Moscow: Rosinformagrotekh, 2018.
Bykov, V.V. and Golubev, M.I., Analysis of programs for renewal of foreign manufacturer components for harvesting and agricultural equipment, Remont. Vosstanovlenie. Modernizatsiya, 2021, no. 5, pp. 3–7. https://doi.org/10.31044/1684-2561-2021-0-5-3-7
Zubarev, Yu.M. and Priemyshev, A.V., Teoriya i praktika povysheniya effektivnosti shlifovaniya materialov. Uchebn. posobie (Theory and Practice of Improving the Efficiency of Materials Grinding), St. Petersburg: Lan’, 2010.
Sipailov, V.A., Teplovye protsessy pri shlifovanii i upravlenie kachestvom poverkhnosti (Thermal Processes at Grinding and Surface Quality Management), Moscow: Mashinostroenie, 1978.
Korchak, S.N., Proizvoditel’nost’ protsessa shlifovaniya stal’nykh detalei (Performance of Grinding Process of Steel Workpieces), Moscow: Mashinostroenie, 1974.
Reznikov, A.N., Teplofizika protsessov mekhanicheskoi obrabotki materialov (Thermophysics of Mechanical Treatment of Materials), Moscow: Mashinostroenie, 1981.
Lur’e, G.B., Shlifovanie metallov. Monografiya (Metal Grinding: Monograph), Moscow: Mashinostroenie, 1969.
Maslov, E.N., Teoriya shlifovaniya materialov (Theory of Materials Grinding), Moscow: Mashinostroenie, 1974.
Yashcheritsyn, P.I. and Zaitsev, A.G., Povyshenie kachestva shlifovannykh poverkhnostei i rezhushchikh svoistv abrazivno-almaznogo instrumenta (Improving the Quality of Grinded Surfaces and Cutting Properties of Abrasive-Diamond Working Tools), Minsk: Nauka i Tekhnika, 1972.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by V. Selikhanovich
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Bykov, V.V., Golubev, M.I., Belyakov, M.S. et al. Experimental Temperature Dependencies in Force Plunge-Cut Grinding. Steel Transl. 53, 867–870 (2023). https://doi.org/10.3103/S0967091223100078
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091223100078