Abstract
The composition and features of the manufacture of epoxy-sand composite specimens, which is used in the repair of road-building machines, are considered. The determination results of wear resistance of the epoxy-sand composite are present. It is shown that the friction properties of the material depend on the concentration of dispersed particles. It has been found out that reducing the filler concentration provides the best wear resistance of epoxy-sand composites.
This is a preview of subscription content, log in via an institution to check access.
REFERENCES
Mikhalchenkov, A.M., Feskov, S.A., Osipov, A.A., and Kononenko, A.S., Effect of epoxy-sand coatings of different compositions on process, wear specificity and service life of ploughshares, Klei. Germetiki. Tekhnol., 2020, no. 1, pp. 45–48. https://doi.org/10.31044/1813-7008-2020-0-1-45-48
Egunova, T.N., Prospects for the use of polymer composite materials in the repair of fuel tanks of cars, Nov. Mater. Tekhnol. Mashinostr., 2020, no. 32, pp. 64–67.
Egunova, T.N., Effect of filler moisture on properties of epoxy-sandy composite, Remont. Vosstanovlenie. Modernizatsiya, 2021, no. 8, pp. 45–48. https://doi.org/10.31044/1684-2561-2021-0-8-45-48
Kartashova, V.V., Study of tribological properties of polymer materials for operation equipment of road-making machines, Remont. Vosstanovlenie. Modernizatsiya, 2020, no. 4, pp. 25–28. https://doi.org/10.31044/1684-2561-2020-0-4-25-28
Gabysheva, V.A., Investigation of thixotropy properties of silicone sealants used for machine repair, Remont. Vosstanovlenie. Modernizatsiya, 2020, no. 10, pp. 44–47. https://doi.org/10.31044/1684-2561-2020-0-10-44-47
Gabysheva, V.A. and Baurova, N.I., Determination of the influence of the working environment on the development of underfilm corrosion of machine parts with dispersed-filled polymer coatings, Polym. Sci., Ser. D, 2022, vol. 15, no. 1, pp. 90–95. https://doi.org/10.1134/S1995421222010087
Zorin, V.A., Baurova, N.I., and Shakurova, A.M., Control of microstructure and properties of filled polymer compositions, Polym. Sci. Ser. D, 2013, vol. 6, no. 1, pp. 36–40. https://doi.org/10.1134/S1995421213010140
Baurova, N.I., Deflected mode simulation of adhesive joints, Polym. Sci., Ser. D, 2009, vol. 2, no. 1, pp. 54–57. https://doi.org/10.1134/S1995421209010110
Marenkov, I.G. and Baurova, N.I., The use of impregnating compositions upon service of the spring elements of road vehicles fabricated from nonmetallic materials, Polym. Sci., Ser. D, 2021, vol. 14, no. 2, pp. 253–256. https://doi.org/10.1134/s1995421221020180
Kosenko, E.A., Baurova, N.I., and Zorin, V.A., Mechanical properties of carbon fiber reinforced plastics with various types of hybrid matrices at negative temperatures, Russ. Metall. (Met.), 2021, vol. 2021, no. 13, pp. 1705–1708. https://doi.org/10.1134/S0036029521130103
Rudskoi, A.I. and Baurova, N.I., Technological heredity during the production and operation of structural materials, Russ. Metall. (Met.), 2019, vol. 2019, no. 13, pp. 1378–1383. https://doi.org/10.1134/s0036029519130317
Baurova, N.I., Zorin, V.A., and Prikhodko, V.M., Description of the process of degradation of material properties using the aparatus of catastrophe theory, Polym. Sci., Ser. D, 2015, vol. 8, no. 2, pp. 92–95. https://doi.org/10.1134/S1995421215020033
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author declares that she has no conflicts of interest.
Additional information
Translated by Sh. Galyaltdinov
About this article
Cite this article
Egunova, T.N. Determination of Wear Resistance of Epoxy-Sand Composites Used in Machine Repairs. Steel Transl. 53, 748–751 (2023). https://doi.org/10.3103/S0967091223090061
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091223090061