Skip to main content
SpringerLink
Log in

Comparing the Use of Molecular Iodine and Copper(II) Compounds as an Oxidizing Agent of Metals and Alloys under Regeneration thereof in the Course of Processing

  • Published:
Steel in Translation Aims and scope

Abstract—Evaluation of molecular iodine and copper(II) compounds as oxidizers of metals and alloys in contact with acid-containing media at a temperature of 22 ± 5°C has been carried out with respect to the following: to their efficiency in the direct branch of the macroscopic stage, to the selectivity for salts as final products, to the presence of the nature of by-products and their relative amount, to the range of additional oxidizing agents under use and their activity, to the amount and products of their reduction, to the requirements in terms of the solubility of reagents and conversion products, from the standpoint of increasing in the yield of target products due to the weight of oxidizing agents, the purity level of the resulting product and the variants of its purification, the use of reaction mixture components in repeated loads, the availability, natural origination thereof, etc. It has been substantiated that the use of J2 is much more appropriate for the oxidation of separate metals in order to obtain a particular salt as a target product. However, in the oxidation of alloys, copper(II) compounds are in many cases more advantageous.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.

REFERENCES

  1. Bykova, A.E., Sharipzyanova, G.Kh., Volgina, N.I., and Khlamkova, S.S., Methodology of analyzing the causes of accidental failure of pipes made of various steel grades, Russ. Metall., 2018, vol. 2018, no. 13, pp. 1264–1267. https://doi.org/10.1134/s0036029518130062

    Article  Google Scholar 

  2. Tereshkin, V., Fantgof, Z., and Grigor’eva, L., Etching of printed circuit boards and regeneration of etching solutions, Tekhnol. Elektronnoi Prom-sti, 2007, no. 3, pp. 24–27.

  3. Ivanov, A.M., Nizkotemperaturnoe geterogennoe geterofaznoe okislenie metallov rastvorennym v zhidkoi faze iodom ili bromom (Low-Temperature Heterogeneous Heterophase Oxidation of Metals by Iodine or Bromine Dissolved in Liquid Phase), Kursk: Kursk. Gos. Tekh. Univ., 2006.

  4. Yatsenko, E.A. and Dzyuba, E.B., Mechanism of diffusion at high-temperature oxidation of metals, Izv. Vyssh. Uchebn. Zaved., Sev.-Kavkazskii Region, 2012, no. 3, pp. 85–89.

  5. Voitovich, R.F. and Golovko, E.I., Vysokotemperaturnoe okislenie metallov i splavov. Spravochnik (High-Temperature Oxidation of Metals and Alloys: Reference Book), Kiev: Naukova Dumka, 1980.

  6. Bénard, J., Oxydation des Métaux, Paris: Gauthier-Villars Editeur, 1964, vol. 2.

    Google Scholar 

  7. Pozhidaeva, S.D. and Ivanov, A.M., Low-temperature oxidation of metals and alloys for processing secondary raw materials into chemical products, Russ. Metall., 2019, vol. 2019, no. 13, pp. 1510–1517. https://doi.org/10.1134/S0036029519130287

    Article  Google Scholar 

  8. Pozhidaeva, S.D., Eliseeva, A.Yu., and Ivanov, A.M., Anomalously deep and fast failure of copper and bronze under the action of the corrosion products existing on them, Russ. Metall., 2015, vol. 2015, no. 13, pp. 1117–1123. https://doi.org/10.1134/s0036029515130200

    Article  Google Scholar 

  9. Grechushnikov, E.A., Kinetic regularities of iron synthesis in various liquid media and optimization of yield of target product, Cand. Sci. (Chem.) Dissertation, Moscow: 2010.

  10. Pozhidaeva, S.D., ELiseeva, A.Yu., Makeeva, T.V., and Ivanov, A.M., Connected with viscosity of the volume phase the moment of the termination of oxidation-reduction processes with participation of heavy metals, Izv. Yugo-Zapadnogo Univ., 2013, no. 5, pp. 221–227.

  11. Pozhidaeva, S.D., Makeeva, T.V., Eliseeva, A.Yu., and Ivanov, A.M., Anomalously deep and fast failure of copper and bronze under the action of the corrosion products existing on them, Russ. Metall., 2015, vol. 2015, no. 13, pp. 1117–1123. https://doi.org/10.1134/s0036029515130200

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Southwest State University, 305040, Kursk, Russia

    S. D. Pozhidaeva & A. M. Ivanov

Authors
  1. S. D. Pozhidaeva
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. M. Ivanov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. D. Pozhidaeva.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by O. Polyakov

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pozhidaeva, S.D., Ivanov, A.M. Comparing the Use of Molecular Iodine and Copper(II) Compounds as an Oxidizing Agent of Metals and Alloys under Regeneration thereof in the Course of Processing. Steel Transl. 53, 514–521 (2023). https://doi.org/10.3103/S0967091223060128

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0967091223060128

Search

Navigation