Skip to main content
SpringerLink
Log in

Strength Properties of Glue-Welded Joints at a Negative Temperature

  • Published:
Steel in Translation Aims and scope

Abstract

The effect of negative temperature exerted on the strength properties of glue-welded joints with different types of adhesive materials (epoxy, anaerobic, organosilicon compounds) has been considered. It is shown that regardless of the chemical nature of the used material, the strength of glue-welded joints is greater than the strength of welded ones. It has been established that among all the types of adhesive studied materials, the use of an anaerobic sealant makes it possible to obtain glue-welded joints with the best strength characteristics, as to compare to similar welded ones. The ultralow temperature values (–50°C) not only exert no negative effect on the mechanical properties of glue-welded joints, but on the contrary, they make it possible to increase these characteristics in comparison with similar samples tested at a room temperature.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.

REFERENCES

  1. Galinovskii, A.L., Bochkarev, S.V., and Nelyub, V.A., Technologies for Manufacture and Diagnostics of Composite Structures of Aerial Vehicles, Staryi Oskol, Belgorod oblast: TNT, 2019.

  2. Rudskoi, A.I., Popovich, A.A., and Grigor’ev, A.V., Kompozitsionnye materialy i pokrytiya (Composite Materials and Coatings), St. Petersburg, 2017.

    Google Scholar 

  3. Zorin, V.A. and Bocharov, V.S., Nadezhnost’ mashin (Reliability of Machines), Orel: OrelGTU, 2003. 549 s.

  4. Petrova, A.P. and Malysheva, G.V., Klei, kleevye svyazuyushchie i kleevye prepregi (Glues, Gluying Bonds and Gluying Prepregs), Kablov, E.N., Ed., Moscow: Vseross. Inst. Aviats. Mater., 2017.

    Google Scholar 

  5. Skryabin, V.A. and Skhirtladze, A.G., Technological methods of using polymer materials during repair work, Remont. Vosstanovlenie. Modernizatsiya, 2017, no. 7, pp. 14–19.

  6. Turusov, R.A., Adgezionnaya mekhanika. Monografiya (Adhesion Mechanics: Monograph), Moscow: Mosk. Gos. Stroit. Univ., 2016.

  7. Lapina, N.V. and Baurova, N.I., Feature of processing machinery parts for workability when transiting to new construction materials, Polym. Sci. Ser. D, 2016, vol. 9, pp. 326–330. https://doi.org/10.1134/S1995421216030138

    Article  CAS  Google Scholar 

  8. Kobets, L.P., Malysheva, G.V., and Borodulin, A.S., Rheological properties of system “elastomer binder-discrete carbon fiber,” Inorg. Mater.: Appl. Res., 2016, vol. 7, no. 1, pp. 15–19. https://doi.org/10.1134/S207511331601010X

    Article  Google Scholar 

  9. Guzeva, T.A., Methods for estimating the operation properties of polymer composite materials, Vse Mater.. Entsiklopedicheskii Sprav., 2014, no. 3, pp. 17–19.

  10. Freidin, A.S. and Turusov, R.A., Svoistva i raschet adgezionnykh soedinenii (Properties and Analysis of Adhesion Compounds), Moscow: Khimiya, 1990.

  11. Suslov, A.G. and Dal’skii, A.M., Nauchnye osnovy tekhnologii mashinostroeniya (Scientific Foundations of Production Engineering), Moscow: Mashinostroenie, 2002.

  12. Konoplin, A.Yu. and Baurova, N.I., Hardness of the near-weld zone during contact spot welding of steels using an adhesive–weld technology, Russ. Metall., 2016, vol. 13, pp. 1308–1311. https://doi.org/10.1134/S0036029516130097

    Article  Google Scholar 

  13. Rudskoi, A.I. and Baurova N.I., Technological heredity during the production and operation of structural materials, Russ. Metall., 2019, vol. 2019, pp. 1378–1383. https://doi.org/10.1134/S0036029519130317

    Article  Google Scholar 

  14. Konoplin, A. Yu., Baurova, N. I., and Anoprienko, A.K., Glue-Mechanical Compounds at Production and Repair of Machines, Moscow: Mosk. Avtodorozhnyi Inst., 2020.

    Google Scholar 

Download references

Funding

The work was performed in the scope of scientific research financially supported according tp project no. 2019–1342; the experimental studies have been carried out using equipment provided by the MADI Center for Collective Use.

Author information

Authors and Affiliations

  1. Moscow Automobile and Road Construction State Technical University (MADI), 125319, Moscow, Russia

    A. Yu. Konoplin & N. I. Baurova

Authors
  1. A. Yu. Konoplin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. I. Baurova
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to N. I. Baurova.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by O. Polyakov

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Konoplin, A.Y., Baurova, N.I. Strength Properties of Glue-Welded Joints at a Negative Temperature. Steel Transl. 53, 283–287 (2023). https://doi.org/10.3103/S0967091223040095

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0967091223040095

Keywords:

Search

Navigation