Skip to main content
SpringerLink
Log in

Restoration of Crankshafts of Diesel Engines by Plasma Facing

  • Published:
Steel in Translation Aims and scope

Abstract

This article is devoted to development of restoration procedure of diesel engine crankshafts and its application in OOO Tekhnoplazma. The main defects of crankshafts are described. The equipment, applied materials, and main modes of plasma facing are summarized. The quality of crankshaft restoration is evaluated.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.

REFERENCES

  1. Lyalyakin, V.P., Restoration of machine parts as an important direction of import substitution in agroindustrial complex, Remont. Vosstanovlenie. Modernizatsiya, 2019, no. 9, pp. 3–5. https://doi.org/10.31044/1684-2561-2019-0-9-3-5

  2. Chernoivanov, V.I., Golubev, I.G., and Lyalyakin, V.P., Organizatsiya i tekhnologiya vosstanovleniya detalei mashin (Organization and Technology of Restoration of Machine Elements), Moscow: Rosinformagrotekh, 2016.

  3. Golubev, I.G. and Lyalyakin, V.P., Directions of development of restoration of agricultural equipment elements, Sb. po itogam II mezhdunar. nauch.-prakt. konf. Goryachkinskie chteniya, posvyashchennoi 150-letiyu so dnya rozhdeniya akademika V.P. Goryachkina (Proc. 2nd Int. Sci.-Pract. Conf. Goryachkin Readings Dedicatd to 150th Birthday of Academician V.P. Goryachkin), Erokhin, M.N., Izmailov, A.Yu., et al., Eds., Moscow: Ross. Gos. Agrar. Univ., 2019, pp. 261–266.

  4. Apatenko, A.S., Bykov, V.V., Golubev, I.G., et al., Tekhnologiya i organizatsiya vosstanovleniya detalei i sborochnykh edinits pri servisnom obsluzhivanii. Uchebnoe posobie (Technology and Organization of Restoration of Elements and Assembly Units at Service Treatment: Handbook), Moscow: Rosinformagrotekh, 2018, vol. 2.

  5. Glazunov, S.N., Vyalkov, V.G., Tsirkov, P.A., and Varlamova, L.D., The recovery of worn necks of steel crankshaft by electric arc welding deposit with ferromagnetic charge, Sb. trudov Mezhdunar. nauch.-tekhn. konf., posvyashchennoi 150-letiyu fakul’teta Mashinostroitel’nye tekhnologii i kafedry Tekhnologii obrabotki materialov MGTU im. N.E. Baumana Innovatsionnye tekhnologii renovatsii v mashinostroenii (Proc. Int. Sci.-Tech. Conf. Dedicated to 150th Anniversary of the Faculty on Machinery Manufacturing Technologies and Department of Materials Processing Technology of Bauman Moscow State Technical University on Innovation Technologies of Renovation in Machinery Manufacture), Lavrinenko, V.Yu., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Bauman, 2019, pp. 110–113.

  6. Ivanov, V.P., Ivashko, V.S., Konstantinov, V.M., Lyalyakin, V.P., and Panteleenko, F.I., Vosstanovlenie i uprochnenie detalei. Spravochnik (Restoration and Hardening of Machine Elements: Reference Book), Panteleenko, F.I., Ed., Moscow: Nauka i Tekhnologii, 2013.

    Google Scholar 

  7. Yudin, V.M., Shipovalov, A.N., and Khrapkov, G.A., Restoration of truck parts, Remont. Vosstanovlenie. Modernizatsiya, 2017, no. 4, pp. 11–13.

  8. Shipovalov, A.N., Khrapkov, G.A., and Yudin, V.M., Restoration of valve lifting cams of Cat 3116 engine by plasma welding deposit, Svarka Diagn., 2010, no. 3, pp. 49–51.

  9. Slinko, D.B., Dorokhov, A.S., Denisov, V.A., and Lyalyakin, V.P., Practice of use of plasma-powder deposit at restoration of worn machine elements, Tekhnol. Mashinostr., 2019, no. 3, pp. 32–37.

  10. Slinko, D.B., Dorokhov, A.S., Denisov, V.A., and Pavlov, V.A., Technological features of shaft reconditioning by plasma surfacing, Zagotovitel’nye Proizvod. Mashinostr., 2018, vol. 16, no. 12, pp. 566–569.

    Google Scholar 

  11. Yudin, V.M., Shipovalov, A.N., and Khrapkov, G.A., Restoration of worn elements by welding deposit, Svarochnoe Proizvod., 2017, no. 7, pp. 35–37.

  12. Shipovalov, A.N., Khrapkov, G.A., Yudin, V.M., and Nosikhin, P.I., Powder supply unit for plasma welding deposit, Tekh. Oborud. Sela, 2012, no. 4, pp. 38–39.

  13. Gadalov, V.N., Serebrovskii, V.I., Abakumov, A.V., Savel’ev, V.I., and Vornacheva, I.V., Improvement of operability and quality of crankshafts restored by gas-plasma coating bsy ultrasonic treatment, Remont. Vosstanovlenie. Modernizatsiya, 2016, no. 6, pp. 8–10.

Download references

Author information

Authors and Affiliations

  1. OOO Tekhnoplazma, 143912, Balashikha, Russia

    A. N. Shipovalov

  2. Russian State Agrarian Correspondence University, 143900, Balashikha, Russia

    A. N. Shipovalov

  3. Bauman State Technical University, 105005, Moscow, Russia

    V. M. Yudin

Authors
  1. A. N. Shipovalov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. M. Yudin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. N. Shipovalov.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by I. Moshkin

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shipovalov, A.N., Yudin, V.M. Restoration of Crankshafts of Diesel Engines by Plasma Facing. Steel Transl. 53, 207–209 (2023). https://doi.org/10.3103/S0967091223030154

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0967091223030154

Keywords:

Search

Navigation