Abstract
It is shown that a rotary vortex thermal unit can be used in order to produce a high quality gypsum binder (fast-setting A grade gypsum) including the utilization of gypsum-containing wastes taken from gas cleaning facilities, with obtaining a marketable product and reducing the accumulation of solid wastes, which should promote solving economic and environmental problems. By varying the maximum roasting temperature and the holding time, controlling both the binding properties of gypsum and its strength has been achieved. These properties are inversely related: as the roasting temperature increases, the binding properties get improved, whereas the strength of the hardened mortar exhibit a decrease. Increasing high-temperature exposure time, on the contrary, leads to worsening gypsum binding properties and improving gypsum strength properties.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
Sulimenko, L.M., Tekhnologiya mineral’nykh vyazhushchikh materialov i izdelii na ikh osnove (Technology of Mineral Binders and Materials Based on Them), Moscow: Vysshaya Shkola, 1983.
Lisienko, V.G., Vrashchayushchiesya pechi: teplotekhnika, upravlenie i ekologiya (Rotating Furnaces: Thermal Engineering, Control, and Ecology), Lisienko, V.G., Ed., Moscow: Teplotekhnik, 2004.
Baskakov, A.P., Protsessy teplo- i massoperenosa v kipyashchem sloe (Heat and Mass Transfer Processes in a Fluidized Layer), Moscow: Metallurgiya, 1978.
Saburov, E.N., Aerodinamika i konvektivnyi teploobmen v tsiklonnykh nagrevatel’nykh ustroistvakh (Aerodynamics and Convective Heat Transfer in Cyclone Heaters), Leningrad: Leningr. Gos. Univ., 1982.
Bersenev, I.S., Bersenev, E.S., Kolyasnikov, A.Yu., and Shonokhov, D.A., Technological features of thermal desulfurization of high-sulfur iron ore concentrates, Chern. Metall., Byull. Nauchno-Tekh. Ekon. Inf., 2016, no. 4 (1396), pp. 32–35.
Bersenev, I.S., Bersenev, E.S., Kolyasnikov, A.Yu., and Lopatin, A.S., Utilization of industrial wastes by pellet production, Chern. Metall., Byull. Nauchno-Tekh. Ekon. Inf., 2018, no. 3, pp. 37–41.
Zhukov, Yu.S., Development and creation of a cyclone unit for heat treatment of dispersed materials, Stal’, 2005, no. 3, pp. 113–114.
Podkovyrin, E.G., Zhukov, Yu.S., Korshunova, N.G., et al., Unit for heat treatment of dispersed materials and its industrial implementation, Stal’, 2010, no. 3, pp. 27–29.
Podkovyrin, E.G., Zhukov, Yu.S., Korshunova, N.G., and Vitkov, O.A., Operation of industrial units for fire neutralization of iron-containing technogenic materials, Stal’, 2010, no. 3, pp. 115–117.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
About this article
Cite this article
Matyukhin, V.I., Pavlova, I.A., Matyukhina, A.V. et al. Technological Potentials of Using a Rotary Vortex Unit for Obtaining Gypsum Binder. Steel Transl. 51, 355–358 (2021). https://doi.org/10.3103/S0967091221050090
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091221050090