Abstract
The creation of smart control systems in the steel industry within the Industry 4.0 framework is considered. Simulation of control systems is a fundamental part of this process. Given existing levels of knowledge, it is not always possible to describe the properties of all the system components and their interactions. Other approaches are required in the simulation of complex energy-intensive processes in pyrometallurgy. As an example, the blast furnace is considered. The main problems in improving information systems in pyrometallurgy are outlined.
Similar content being viewed by others
REFERENCES
Sovremennaya prikladnaya teoriya upravleniya (Modern Applied Control Theory), Kolesnikov, A.A., Ed., Taganrog: Taganrog. Gos. Radiotekh. Univ., 2000, in 3 parts.
Spravochnik po teorii avtomaticheskogo upravleniya (Handbook on the Automatic Control Theory), Krasovskii, A.A., Ed., Moscow: Nauka, 1987.
Spirin, N.A., Shvydkii, V.S., Lobanov, V.I., and Lavrov, V.V., Vvedenie v sistemnyi analiz teplofizicheskikh protsessov metallurgii (Introduction into System analysis of Thermophysical Metallurgical Processes), Yekaterinburg: Ural. Gos. Tekh. Univ., 1999.
Salikhov, Z.G., Arunyants, G.G., and Rutkovskii, L.A., Sistemy optimal’nogo upravleniya slozhnymi tekhnologicheskimi ob”ektami (Optimal Systems for the Control of Complex Technological Objects), Moscow: Teploenergetik, 2004.
Yusfin, Yu.S., Metallurgiya chuguna (Cast Iron Metallurgy), Moscow: Akademkniga, 2004.
Ramm, A.N., Sovremennyi domennyi protsess (Modern Blast Furnace Process), Moscow: Metallurgiya, 1980.
Kitaev, B.I., Yaroshenko, Yu.G., and Lazarev, B.D., Teploobmen v domennoi pechi (Heat Exchange in the Blast Furnace), Moscow: Metallurgiya, 1966.
Tovarovskii, I.G., Domennaya plavka (Blast Furnace Smelting), Dnepropetrovsk: Porogi, 2009.
Bol’shakov, V.I., Tekhnologiya vysokoeffektivnoi energosbregayushchei domennoi plavki (Technology of Highly Efficient Blast Furnace Smelting), Kyiv: Naukova Dumka, 2007.
Andronov, V.N., Ekstraktsiya chernykh metallov iz prirodnogo i tekhnogennogo syr’ya (Extraction of Ferrous Metals from Natural and Technogenic Raw Materials. Blast Furnace Process), Donetsk: Nord-Press, 2009.
Dobroskok, V.A., Kuznetsov, N.A., and Tumanov, A.I., Mathematical models of gas dynamic processes and recovery in the blast furnace, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1985, no. 3, pp. 145–146.
Dmitriev, A.N., Matematicheskoe modelirovanie domennogo protsessa (Mathematical Modeling of the Blast Furnace Process), Yekaterinburg: Ural. Otd., Ross. Akad. Nauk, 2011.
Ovchinnikov, Yu.N., Moikin, V.I., Spirin, N.A., and Bokovikov, B.A., Nestatsionarnye protsessy i povyshenie effektivnosti domennoi plavki (Nonstationary Processes and Efficiency Improvement of the Blast Furnace Smelting), Chelyabinsk: Metallurgiya, 1989.
Chentsov, A.V., Chesnokov, Yu.A., and Shavrin, S.V., Balansovaya logiko-statisticheskaya model’ domennogo protsessa (Balance Logical-Statistical Model of the Blast Furnace Process), Moscow: Nauka, 1991.
Emel’yanov, S.V., Korovin, S.K., Myshlyaev, L.P., et al., Teoriya i praktika prognozirovaniya v sitemakh upravleniya (Theory and Practice of Forecasting in the Control Systems), Moscow: Rossiiskie Universitety, 2008.
Myshlyaev, L.P. and Evtushenko, V.F., Prognozirovanie v sistemakh upravleniya (Forecasting Using Control Systems), Novosibirsk: Sib. Gos. Ind. Univ., 2002.
Zagainov, S.A., Onorin, O.P., and Gileva, L.Yu., Development and implementation of mathematical software for flexible technological modes of blast furnace, Stal’, 2000, no. 9, pp. 12–15.
Spirin, N.A., Ipatov, Yu.V., Lobanov, V.I., et al., Informatsionnye sistemy v metallurgii (Information Systems in Metallurgy), Yekaterinburg: Ural. Gos. Tekh. Univ.–Ural. Politekh. Inst., 2001.
Onorin, O.P., Spirin, N.A., Terent’ev, V.L., et al., Komp’yuternye metody modelirovaniya domennogo protsessa (Computer Modeling of the Blast Furnace Process), Spirin, N.A., Ed., Yekaterinburg: Ural. Gos. Tekh. Univ.–Ural. Politekh. Inst., 2005.
Onorin, O.P., Spirin, N.A., Pavlov, A.V., et al., Logical recognition of deviation type of the blast furnace smelting from standard, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2014, no. 8, pp. 42–47.
Istomin, A.S., Spirin, N.A., Onorin, O.P., et al., Information-logic system for recognition of deviation type of the blast furnace smelting from standard, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2015, no. 8 (58), pp. 607–611.
Onorin, O.P., Spirin, N.A., Istomin, A.S., et al., Features of blast furnace transient processes, Metallurgist, 2017, vol. 61, nos. 1–2, pp. 121–126.
Spirin, N.A., Lavrov, V.V., Parshakov, S.I., et al., Optimizatsiya i identifikatsiya tekhnologicheskikh protsessov v metallurgii (Optimization and Identification of Technological Processes in Metallurgy), Yekaterinburg: Ural. Gos. Tekh. Univ.–Ural. Politekh. Inst., 2006.
Spirin, N.A., Lavrov, V.V., Rybolovlev, V.Yu., et al., Matematicheskoe modelirovanie metallurgicheskikh protsessov v ASUTP (Mathematical Modeling of Metallurgical Processes in Automated Process Control System (APCS)), Spirin, N.A., Ed., Yekaterinburg: UINTs, 2014.
Spirin, N.A., Lavrov, V.V., Rybolovlev, V.Yu., et al., Model’nye sistemy podderzhki prinyatiya reshenii v ASUTP domennoi plavki (Model Systems of Decision-Making Support in Automated Process Control System of Blast Furnace Smelting), Spirin, N.A., Ed., Yekaterinburg: Ural. Fed. Univ., 2011.
ACKNOWLEDGMENTS
Financial support was provided by the Russian government (decree 211, contract 02.A03.21.0006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Spirin, N.A., Rybolovlev, V.Y., Lavrov, V.V. et al. Improving Metallurgical Information Systems: Blast-Furnace Applications. Steel Transl. 49, 118–122 (2019). https://doi.org/10.3103/S0967091219020141
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091219020141