Abstract
The boundary problem for the drawing of a round nonhollow profile in conical die is solved on the basis of the Amontons–Coulomb friction law for preliminarily strengthened metals, whose strengthening is described by the formula σs/σs0 = 1 + mεn. Taking account of the initial strain, the influence of the parameters m and n of the strengthening curve on the axial stress σx in the narrow section of the drawplate and the distribution of the normal stress over the contact surface may be established. On the basis of the solutions obtained, the form of the strengthening curve may be taken into account in calculating the reduction conditions for the multipass drawing of wire and rod. The proposed solutions are compared with existing solutions.
Similar content being viewed by others
References
Perlin, I.L. and Ermanok, M.Z., Teoriya volocheniya (Drawing Theory), Moscow: Metallurgiya, 1971.
Radionova, L.V. and Radionov, A.A., The current situation and perspectives the development of wire-drawing steel wire, Russ. Internet J. Ind. Eng., 2013, no. 1, pp. 3–11.
Bitkov, V.V., Tekhnologiya i mashiny dlya proizvodstva provoloki (Technology and Machines for Wire Production), Yekaterinburg: Ural. Otd., Ross. Akad. Nauk, 2004.
Tselikov, A.I., Tomlenov, A.D., Zyuzin, V.I., et al., Teoriya prokatki: spravochnik (Theory of Rolling: Handbook), Moscow: Metallurgiya, 1982.
Arkulis, G.E. and Dorogobid, V.G., Teoriya plastichnosti: uchebnoe posobie dlya vuzov (Theory of Plasticity: Manual for Higher Education Institutions), Moscow: Metallurgiya, 1987.
Baranov, G.L., Influence of the strengthening curve on the axial stress in round rod on drawing, Steel Transl., 2018, vol. 48, no. 3, pp. 185–188.
Hoffman, O. and Sachs, G., Introduction to the Theory of Plasticity for Engineers, New York: McGraw-Hill, 1953.
Smirnov, V.S., Teoriya obrabotki metallov davleniem (The Theory of Metal Pressuring), Moscow: Metallurgiya, 1973.
Zykov, Yu.S., Teoriya volocheniya sloshnykh profilei (Theory of Drawing of Solid Profiles), Kiev: UMKVO, 1991.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.L. Baranov, 2018, published in Stal’, 2018, No. 9, pp. 43–46.
About this article
Cite this article
Baranov, G.L. Strain Hardening in Multipass Drawing of a Round Nonhollow Profile. Steel Transl. 48, 606–609 (2018). https://doi.org/10.3103/S0967091218090048
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218090048