Abstract
A single dependence of the power factor on the arc current is established for all steelmaking arc furnaces. On that basis, universal furnace characteristics may be calculated, determining the functional relationship of the active, reactive, and apparent power with the arc current. By that means, precise and simple calculation of the electrical characteristics is possible for arc furnaces of any power, with any primary and secondary transformer voltages, including superpowerful furnaces with reactors on the step-up side of the transformer. Detailed analysis of all the arc characteristics is consistent with current notions regarding the physical processes in arc furnaces.
Similar content being viewed by others
References
Efroimovich, Yu.E., Calculation of arc furnaces taking into account the nonlinearity of introduced by the arc discharge, Elektrichestvo, 1948, no. 12, pp. 43–55.
Rybin, O.N., Tolmachev, S.S., and Kirsanov, Yu.P., Development of a rational electric mode of 100-t arc steelmaking furnaces, in Vysokomoshchnye elektropechi i novaya tekhnologiya proizvodstva stali (High-Power Electric Furnaces and a New Technology for Steel Production), Moscow: Metallurgiya, 1981.
Spelitsyn, R.I., Priogov, N.A., and Smolyarenko, V.D., Influence of electric operating modes of high-power arc steel-smelting furnaces on burial of an arc in a liquid bath, Proizvod. Elektrostali,1977, no. 6, pp. 46–50.
Rabinovich, V.L., Pristupa, M.L., Zaitsev, I.I., and Nemkova, L.I., Electrical characteristics of high-power arc steel smelting furnaces, in Povyshenie effektivnosti raboty dugovykh staleplavil’nykh pechei (Performance Improvement of Arc Steel Smelting Furnaces), Moscow: Metallurgiya, 1983, pp. 17–20.
Artsimovich, L.A., Plazmennye uskoriteli (Plasma Accelerators), Moscow: Mashinostroenie, 1973.
Sisoyan, G.A., Elektricheskaya dyga v elektricheskoi pechi (Electric Arc in Electric Furnace), Moscow: Metallurgiya, 1974, 3rd ed.
Evseeva, N.V., Goncharenko, I.V., Smirnov, V.I., and Zinov’ev, V.Yu., Analysis of the electrical parameters of an AC arc in an arc steel smelting furnace, in Intellektika. Logistika. Sistemologiya (Intellectics. Logistics. Systemology), Chelyabinsk: Tsentr Nauchno-Tekh. Inf., 2005, no. 15, pp. 44–51.
Khrenov, K.K., Elektricheskaya svarochnaya duga (Electric Welding Arc), Moscow: Mashgiz, 1949.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.V. Evseeva, S.L. Baranov, A.S. Loskutov, A.R. Akhmetov, 2018, published in Stal’, 2018, No. 8, pp. 15–18.
About this article
Cite this article
Evseeva, N.V., Baranov, S.L., Loskutov, A.S. et al. Universal Electrical Characteristics of Steelmaking Arc Furnaces. Steel Transl. 48, 523–527 (2018). https://doi.org/10.3103/S0967091218080053
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218080053