Abstract
By analyzing the development of standing waves and surges at the metal meniscus in the mold and their influence on crust formation, it is established that wave processes in the mold may be responsible for accidents and affect billet quality.
Similar content being viewed by others
References
Javurek, M., Thumfart, M., Rieger, K., and Hirschmanner, M., Mathematical mould level model based on numerical simulation and water model experiments, Proc. 6th European Conf. on Continuous Casting, Riccione, 2008.
Kao, S.-S., Kua, H.-C., Wiens, O., et al., A novel submerged entry nozzle for high casting speeds, Proc. 7th European Conf. on Continuous Casting, Düsseldorf, 2011.
Smirnov, A.N., Kuberskii, S.V., and Shtepan, E.V., Nepreryvnaya razlivka stali (Continuous Casting of Steel), Donetsk: Donetsk. Nats. Tekh. Univ., 2011.
Thomas, B.G., Vanka, S.P., and Quan Yuan, Study of transient flow and particle transport in continuous steel caster molds. Part 1. Fluid flow, Metall. Mater. Trans. B, 2004, vol. 35, no. 4, pp. 685–702.
Dauby, P.H., Real flows in continuous casting molds, Iron Steel Technol., 2011, vol. 8, no. 11, pp. 151–160.
Kamal, M. and Sahai, Y., A simple innovation in continuous casting mould technology for fluid flow and surface standing waves control, ISIJ Int., 2006, vol. 46, no. 12, p. 1823.
Hirschmanner, M., Morvald, K., and Frolich, C., Next generation mold level control: development of LevCon 2.0, Mater. Manuf. Process., 2011, vol. 26, no. 1, pp. 169–174.
Smirnov, A.N. and Antykuz, O.V., Effect of reciprocating motion of the crystallizer on the formation of waves, Metall. Gornorudn. Prom., 2010, no. 7, pp. 235–237.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.N. Smirnov, S.V. Kuberskii, E.N. Smirnov, A.P. Verzilov, E.N. Maksaev, 2017, published in Stal’, 2017, No. 7, pp. 10–14.
About this article
Cite this article
Smirnov, A.N., Kuberskii, S.V., Smirnov, E.N. et al. Influence of meniscus fluctuations in the mold on crust formation in slab casting. Steel Transl. 47, 478–482 (2017). https://doi.org/10.3103/S0967091217070129
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091217070129