Abstract
The quality of metal in continuous-cast pipe blanks is investigated, for different steel-production technologies. The presence of large nonmetallic inclusions is largely due to disruptions in the continuouscasting technology. Other significant factors are nonoptimal modification of the nonmetallic inclusions and problems in ladle treatment. Measures ensuring acceptable content of nonmetallic inclusions are developed and tested.
Similar content being viewed by others
References
Yavoiskii, V.I., Rubenkchik, Yu.I., and Okenko, A.P., Nemetallicheskie vklyucheniya i svoistva stali (Nonmetal Inclusions and Properties of Steel), Moscow: Metallurgiya, 1980.
Alekseenko, A.A. and Ponomarenko, D.A., Steel production with certain characteristics of nonmetal inclusions, Elektrometallurgiya, 2009, no. 2, pp. 15–22.
Kazakov, A.A., Kovalev, P.V., Ryaboshuk, S.V., Zhironkin, M.V., and Krasnov, A.V., Control of nonmetallic inclusions formation during converter steel production, Chern Met., 2014, no. 34, pp. 43–48.
Korozionno-aktivnye nemetallicheskie vklyucheniya v uglerodistykh i nizkoligirovannykh stalyakh (Corrosion-Active Nonmetal Inclusions in Carbon and Low-Alloy Steels), Rodionova, I.G., Zaitsev, A.I., and Baklanov, O.N., Eds., Moscow: Metallurgizdat, 2005.
Dub, A.V., Barulenkova, N.V., Morozova, T.V., Efimov, S.V., Filatov, V.N., Zinchenko, S.D., and Lamukhin, A.M., Nonmetallic inclusions in low-alloy tube steel, Metallurgist, 2005, vol. 49, no. 3, pp. 138–148.
Safronov, A.A., Tazetdinov, V.I., Movchan, M.A., and Kroe, A.L., The conditions for the effective modification of nonmetal inclusions in low-carbon corrosionresistant steels, in Tr. XXI mezhd. konf. “Truby” (Trans. XXI Int. Conf. “Pipes”), Chelyabinsk: Ross. Nauchno-Issled. Inst. Trubnoi Prom., 2014, pp. 44–54.
Kuklev, A.V. and Leites, A.V., Praktika nepreryvnoi razlivki stali (Continuous Steel Casting), Moscow: Metallurgizdat, 2011.
Lukavaya, M.S and Mikhailov, G.G., Analysis of tightening of submerged machines in the continuous steel casting, Vestn. Yuzh.-Ural. Gos. Univ., 2006, no. 10, pp. 69–72.
Safronov, A.A., Movchan, M.A., Dub, V.S., Ioffe, A.V., Bazaev, E.L., and Pridein, A.A., Production of corrosion-resistant 09ΓCΦ steel, Steel Transl., 2016, vol. 46, no. 2, pp 150–158.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Safronov, V.V. Golovin, Yu.B. Belokozovich, V.M. Matus, A.V. Ioffe, M.A. Movchan, 2016, published in Stal’, 2016, No. 6, pp. 22–27.
About this article
Cite this article
Safronov, A.A., Golovin, V.V., Belokozovich, Y.B. et al. Production of continuous-cast pipe blank without large nonmetallic inclusions. Steel Transl. 46, 428–434 (2016). https://doi.org/10.3103/S0967091216060103
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091216060103