Abstract
Specialists at OAO NLMK, in close collaboration with research institutes, have developed new grades of isotropic electrical steels and practical principles for their mass production, especially for use in high-efficiency magnetic cores. These include steels with low magnetic losses, high magnetic induction, and high magnetic permeability (high-permeability steel); semiprocessed rolled products from several alloying groups; and steel for high-speed stamping. The proposed technologies have no counterparts anywhere in the world and permit complete import substitution.
Similar content being viewed by others
References
Mindlin, B.I., Nastich, V.P., and Cheglov, A.E., Izotropnaya elektrotekhnicheskaya stal’ (Isotropic Electrical Steel), Moscow: Intermet Inzhiniring, 2006.
Polyakov, M.Yu. and Bakhtin, S.V., Production of highquality electrical steel by Novolipetsk Steel Company and prospective development of production taking into account requirements of the global market, Chern. Metall., 2013, no. 5, pp. 51–63.
Polyakov, M.Yu. and Bakhtin, S.V., Production of highquality electrical steel by Novolipetsk Steel Company and prospective development of production taking into account requirements of the global market, Inzh. Resheniya, 2013, no. 1, pp. 34–37.
Polyakov, M.Yu. and Bakhtin, S.V. Production of electrical steel at OAO NLMK, Steel Transl., 2014, vol. 44, no. 10, pp. 757–763.
Uvarkin, A.A., Zaveryukha, A.A., Polyakov, M.Yu., and Bakhtin, S.V., Influence of small additions of antimony on the texture and magnetic properties of isotropic high-alloy electrical-engineering steel, Steel Transl., 2010, vol. 40, no. 3, pp. 290–293.
Cheglov, A.E., Barybin, V.A., Yaroshenko, A.V., et al., Technology development of electrical isotropic steel for magnetic core of high efficiency electric equipment in Novolipetsk Steel Compnay, in Tr. X kongr. prokatchikov, Lipetsk, 14–16 aprelya 2015 g. (Trans. X Congr. of Steel Rollers, Lipetsk, April 14–16, 2015), Lipetsk: Novolipetsk. Pechat. Dom, 15, vol. 1, pp. 308–312.
Polyakov, M.Yu., Bakhtin, S.V. Shishov, A.Yu., and Uvarkin, A.A., Production of new electric steels in Novolipetsk Steel Company, Proizvod. Prokata, 2010, no. 7, pp. 17–21.
Cheglov, A.E., Barybin, V.A., Yaroshenko, A.V., Bakhtin, S.V., Alymov, M.I., Yusupov, V.S., and Parakhin, V.I., Production of flat electrical steel with super low magnetic losses, Steel Transl., 2015, vol. 45, no. 4, pp. 279–282.
Cheglov, A.E., Kondratkov, D.A., and Zaveryukha, A.A., Structure and properties of metals and alloys: influence of Fe3P inclusions on the magnetic properties of isotropic electrical steel, Steel Transl., 2006, vol. 36, no. 4, pp. 66–70.
Uvarkin, A.A., Zaveryukha, A.A., Gorbunov, I.P., Polyakov, M.Yu., and Bakhtin, S.V., Influence of normalization in dome furnaces on the properties of isotropic electrical-engineering steel with ~3% Si, Steel Transl., 2009, vol. 39, no. 3, pp. 280–283.
Cheglov, A.E., Barybin, V.A., Degtev, S.S., et al., Development of the production technology for magnetic cores of the high-efficiency electrical equipment. Message 1, Proizvod. Prokata, 2013, no. 12, pp. 3–6.
Cheglov, A.E., Barybin, V.A., Degtev, S.S., et al., Development of the production technology for magnetic cores of the high-efficiency electrical equipment. Message 2, Proizvod. Prokata, 2014, no. 1, pp. 3–6.
Cheglov, A.E. and Mindlin, B.I., Imrovement of the technology of heat treatment of the hot-rolled highalloy electrical isotropic steel, Stal’, 1999, no. 10, pp. 62–65.
Cheglov, A.E., Barybin, V.A., Degtev, S.S., et al., Development of the production technology for magnetic cores of the high-efficiency electrical equipment. Message 3, Proizvod. Prokata, 2014, no. 2, pp. 2–5.
Cheglov, A.E., Barybin, V.A., Degtev, S.S., et al., Development of the production technology for magnetic cores of the high-efficiency electrical equipment. Message 4, Proizvod. Prokata, 2014, no. 3, pp. 3–6.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.E. Cheglov, V.P. Nastich, A.V. Yaroshenko, V.A. Barybin, S.V. Bakhtin, M.I. Alymov, V.S. Yusupov, V.I. Parakhin, S.O. Chevashov, 2015, published in “Stal’,” 2015, No. 10, pp. 62–67.
About this article
Cite this article
Cheglov, A.E., Nastich, V.P., Yaroshenko, A.V. et al. Production of new isotropic electrical steels at OAO NLMK. Steel Transl. 45, 803–809 (2015). https://doi.org/10.3103/S0967091215100022
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091215100022