Abstract
The calculation of hydromechanical couplings with a differential planetary gear mechanism is considered. The operation of a hydromechanical coupling with a differential planetary gear mechanism is described, in different stages of the drive cycle. A method of parameter calculation is developed, taking account of the structure of the hydromechanical couplings with a differential planetary gear mechanism. It is found that the rigidity of the coupling is nonlinear and depends on the pressure in the damper of the hydraulic system. Formulas are presented for determining the best parameters of the hydraulic system in terms of effective drive protection.
Similar content being viewed by others
References
Polyakov, V.S., Barbash, I.D., and Ryakhovskii, O.A., Spravochnik po muftam (Coupling Handbook), Leningrad: Mashinostroenie, Leningr. Otd., 1979, 2nd ed.
Fokin, A.E., Gavrilenko, M.D., and Shishkarev, M.P., Adaptive frictional coupling with differential frictional pairs, Vestn. Donsk. Gos. Tekhn. Univ., 2011, no. 1, pp. 49–56.
Kuznetsov, N.G., Nekhoroshev, D.A., and Nekhoroshev, D.D., Refining the parameters of an elastic element in an adhesive hydropneumatic coupling, Agrarn. Nauka, 2011, no. 12, pp. 25–27.
Kuznetsov, N.G., Nekhoroshev, D.A., and Vorob’eva, N.S., Characteristics of an adhesive hydropneumatic planetary coupling, Mekhanizats. Elektrif. Sel’sk. Khoz., 2009, no. 10, pp. 28–30.
Roganov, L.L., Capabilities of hydraulic protective devices for metallurgical machines, Zashchita metallurgicheskikh mashin ot polomok (Preventing Damage to Metallurgical Machines), Mariupol’, 1998, issue 2, pp. 89–91.
Yaremenko, O.V., Ogranichivayushchie gidrodinamicheskie mufty (Limiting Hydrodynamic Couplings), Moscow: Mashinostroenie, 1970.
Shishkarev, M.P. and Wu Tien Zung, Loading with triggering of adaptive frictional couplings, Materialy VI nauchno-praktich. konf. Innovatsionnye tekhnologii v mashinostroenii i metallurgii (Proceedings of Sixth Conference on Innovative Technologies in Manufacturing and Metallurgy), 2014, pp. 131–142.
Korneev, Yu.S., Korneeva, E.N., and Igrashkina, N.A., Application and selection of starter clutches in technological drives, Fund. Prikl. Probl. Tekhn. Tekhnol., 2014, no. 3, pp. 3–6.
Borodina, M.B. and Savin, L.A., Adaptive hydromechanical devices in mechatronic rotor systems, Izv. Yugo-Zapad. Gos. Univ., 2013, no. 1, pp. 151–155.
Sveshnikov, V.K., Stanochnye gidroprivody: Spravochnik (Hydraulic Machine-Tool Drives: A Handbook), Moscow: Mashinostroenie, 1995.
Dunaev, P.F. and Lelikov, O.P., Konstruirovanie uglov i detalei mashin: Ucheb. posobie dlya stud. tekhn. spets. vuzov (Design of Machine Parts: A University Textbook), Moscow: Vysshaya Shkola, 2000, 6th ed.
Reshetov, D.N., Detali mashin: Uchebnik dlya studov mashinostroitel’nykh i mekhanicheskikh spetsial’nostei vuzov (Machine Parts: A University Textbook), Moscow: Mashinostroenie, 1989, 4th ed.
Navrotskii, K.L., Teoriya i proektirovanie gidroi pnevmoprivodov (Theory and Design of Hydraulic and Pneumatic Drives), Moscow: Mashinostroenie, 1991.
Borodina, M.B., Bulavin, K.A., and Mironenko, S.V., Optimal parameters of a hydromechanical coupling with a helical executive mechanism capable of damping sudden load spikes, Fund. Prikl. Probl. Tekhn. Tekhnol., 2014, no. 6, pp. 70–74.
Borodina, M.B., Mironenko, S.V., and Shevchenko, B.A., Dynamic simulation of a hydromechanical coupling with a planetary gear mechanism, Fund. Prikl. Probl. Tekhn. Tekhnol., 2014, no. 2, pp. 44–50.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.B. Borodina, S.V. Mironenko, 2015, published in “Izvestiya VUZ. Chernaya Metallurgiya,” 2015, No. 7, pp. 501–505.
About this article
Cite this article
Borodina, M.B., Mironenko, S.V. Hydromechanical coupling with a planetary gear mechanism. Steel Transl. 45, 478–481 (2015). https://doi.org/10.3103/S0967091215070050
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091215070050