Abstract
A method is proposed for determining the unit work of deformation in the broaching of blanks in two-roller screw-rolling mills. A new approach is outlined for assessing the fracture risk and the structure of continuous-cast circular billet. Methods for determining the work of deformation in different sections of the deformation zone are considered. The distribution of the work of deformation due to reduction over the whole deformation zone is determined. The influence of extension on the work of deformation is assessed for similar rolling mills at OAO Pervoural’skii Novotrubnyi Zavod and OAO Yuzhnotrubnyi Zavod.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Emel’yanenko, P.T., Teoriya kosoi i piligrimovoi prokatki (Theory of Skew and Pilger Rolling), Moscow: Metallurgizdat, 1949.
Kolikov, A.P., Romanenko, V.P., Samusev, S.V., et al., Mashiny i agregaty trubnogo proizvodstva (Equipment for Pipe Production), Moscow: MISIS, 1998.
Golubchik, R.M., Merkulov, D.V., Klempert, E.D., and Medvedev, E.K., Analysis of Work Performed in Screw Rolling, Proizv. Prokata, 2010, no. 3, pp. 7–13.
Pavlov, Ig.M., Teoriya prokatki i osnovy plasticheskoi deformatsii metallov (Rolling Theory and Principles of Plastic Deformation of Metals), Moscow-Leningrad: Metallurgizdat, 1938.
Galkin, S.P., Romantsev, B.A., Goncharuk, A.V., and Fadeev, M.A., Strain Intensity on Broaching in Screw Rolling Mills, Proizv. Prokata, 2008, no. 4, pp. 29–33.
Drozd, V.G., Analysis of the Deformation Strength of Steel in Determining the Forces for Hot Rolling, Proizv. Prokata, 2010, no. 9, pp. 14–19.
Golubchik, R.M., Vorontsov, V.K., and Belevitin, V.A., Selecting the Optimal Roller and Blank Configuration for Screw Rolling, Stal’, 1982, pp. 64–66.
Golubchik, R.M., Merkulov, D.V., and Shelest, A.E., Shaping Characteristics in the Pressure Treatment of Metals, Metally, 2009, no. 1, pp. 21–24.
Golubchik, R.M. and Lebedev, A.V., New Methods of Piercing Mills Setting Relating to the Cyclic Forming of Hollows, History and Future of Seamless Steel Tubes: Seventh International Conference, Karlovy Vary, 1990, pp. 1/8–1/17.
Golubchik, R.M., Polukhin, P.I., Matveev, Yu.M., et al., Issledovanie protsessov proizvodstva trub (Pipe Production Processes), Moscow: Metallurgiya, 1970.
Author information
Authors and Affiliations
Additional information
Original Russian Text © R.M. Golubchik, E.V. Merkulov, E.K. Medvedev, M.V. Chepurin, 2013, published in “Stal’,” 2013, No. 3, pp. 41–46.
About this article
Cite this article
Golubchik, R.M., Merkulov, E.V., Medvedev, E.K. et al. Work of deformation in screw rolling. Steel Transl. 43, 137–142 (2013). https://doi.org/10.3103/S0967091213030042
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091213030042