Abstract
The relation between electrode spacing and the electrode height is established in ferroalloy furnaces that employ carbon reducing agents.
Similar content being viewed by others
References
Edneral, F.P., Elektrometallurgiya stali i ferrosplavov (Electrometallurgy of Steel and Ferroalloys), Moscow: Metallurgiya, 1977.
Shkirmontov, A.P., Electrode Spacing in Ferroalloy Furnaces, in Sovremennye problemy elektrometallurgii stali: Materialy XIV Mezhdunarodnoi konferentsii (Current Problems in the Electrometallurgy of Steel: Proceedings of the Fourteenth International Conference), Chelyabinsk: ITs YuUrGU, 2010, part 1, pp. 224–227.
Strunskii, B.M., Raschety rudno-termicheskikh pechei (Design of Ore-Heating Furnaces), Moscow: Metallurgiya, 1982.
Shkirmontov, A.P., Developing Principles and Parameters for Ferroalloy Smelting with Increased Electrode Height, Metallurg, 2009, no. 5, pp. 57–62.
Svenchanskii, A.D. and Smelyanskii, M.Ya., Elektricheskie promyshlennye pechi (Industrial Electrofurnaces), Moscow: Energiya, 1970, vol. 2.
Val’ter, A.G., Ferroalloy Production, Trudy pervoi Vsesoyuznoi konferentsii po ferrosplavam (Proceedings of the First All-Union Conference on Ferroalloys), Moscow-Leningrad: ONTI, 1935, pp. 466–485.
Sergeev, P.V. Energeticheskie zakonomernosti rudno-termicheskikh elektropechei, elektroliza i electricheskoi dugi (Energy Laws of Ore-Heating Furnaces, Electrolysis, and Electric Arcs), Alma-Ata: AN KazSSR, 1963.
Edneral, F.P., Elektrometallurgiya stali i ferrosplavov (Electrometallurgy of Steel and Ferroalloys), Moscow: Metallurgiya, 1955.
Gavrilov, V.A., Polyakov, I.I., and Polyakov, O.I., Optimizatsiya rezhimov raboty ferrosplavnykh pechei (Optimizing the Operation of Ferroalloy Furnaces), Moscow: Metallurgiya, 1996.
Robert, A.J., Electrosmelting Practice (Russian translation), Moscow: Metallurgiya, 1960.
Emlin, B.I. and Gasik, M.I., Spravochnik po elektrotermicheskim protsessam (Handbook on Electrothermal Processes), Moscow: Metallurgiya, 1978.
Ryss, M.A., Proizvodstvo ferrosplavov (Ferroalloy Production), Moscow: Metallurgiya, 1975.
Ryss, M.A., Proizvodstvo ferrosplavov (Ferroalloy Production), Moscow: Metallurgiya, 1985.
Durrer, R. and Volkert, G., Metallurgie der Ferrolegierungen, Berlin: Springer, 1972.
Ryss, M.A., Pechi s vrashchayushcheisya vannoi dlya proizvodstva ferrosplavov (Rotating-Bath Furnaces for Ferroalloy Production), Moscow: Metallurgiya, 1964.
Shkirmontov, A.P., Influence of Electrode Diameter on the Electrical Resistance of the Bath in Ferroalloy Furnaces, Elektrooborud.: Ekspluat. Remont, 2011, no. 4, pp. 42–49.
Shkirmontov, A.P., Ferrosilicon Smelting with Increased Electrode Height and Electrode Spacing in Plant Conditions, Metallurg, 2009, no. 10, pp. 64–67.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.P. Shkirmontov, 2012, published in “Stal’,” 2012, No. 3, pp. 26–29.
About this article
Cite this article
Shkirmontov, A.P. Relation between the electrode spacing and the electrode height in ferroalloy furnaces. Steel Transl. 42, 249–252 (2012). https://doi.org/10.3103/S0967091212030138
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091212030138