Abstract
A production technology for flat axisymmetric blanks has been developed. The blanks are produced from round bar or thick-walled pipe by end rolling. In rolling at different temperatures and speeds, with different degrees of reduction, the properties of the metal mainly depend on the deformation temperature. The best mechanical properties are obtained at 950°C. On the basis of this technology, deformation conditions are recommended for the production of axisymmetric blanks that meet the relevant GOST requirements.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Original Russian Text © N.A. Komkov, O.V. Livanova, A.N. Nikulin, G.A. Filippov, 2012, published in “Stal’,” 2012, No. 1, pp. 54–58.
About this article
Cite this article
Komkov, N.A., Livanova, O.V., Nikulin, A.N. et al. Manufacture of plane axisymmetric blanks by end rolling from round bar or thick-walled pipe. Steel Transl. 42, 73–77 (2012). https://doi.org/10.3103/S0967091212010093
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091212010093