Abstract
A method of rolling-mill adjustment is proposed for the production of flatter strip, with corresponding calculations of the rolling conditions. On the basis of such adjustment, combined (symmetric + asymmetric) rolling of corrosion-resistant steel strip has been introduced in the 1700 reversible four-roller mill at OAO Chelyabinskii Metallurgicheskii Kombinat, with improvement in strip flatness.
Similar content being viewed by others
References
Grigoryan, G.G., Zheleznov, Yu.D., Chernye, V.A., et al., Nastroika, stabilizatsiya i kontrol’ protsessa tonkolistovoi prokatki (Adjustment, Stabilization, and Monitoring of Thin-Sheet Rolling), Moscow: Metallurgiya, 1975.
Maksimov, E.A., Reducing the Pressure on the Roller and the Tension in the Asymmetric Cold Rolling of Strip, Metallurg, 2010, no. 11, pp. 54–57.
Maksimov, E.A., Shatalov, R.L., Boskhamdzhiev, N.Sh., Proizvodstvo planshetnykh polos pri prokatke (Flat-Strip Production in Rolling), Moscow: Teplotekhnika, 2008.
Author information
Authors and Affiliations
Additional information
Original Russian Text © R.L. Shatalov, E.A. Maksimov, A.G. Babkin, 2011, published in “Stal’,” 2011, No. 10, pp. 33–36.
About this article
Cite this article
Shatalov, R.L., Maksimov, E.A. & Babkin, A.G. Adjustment of rolling mills to produce flatter steel strip. Steel Transl. 41, 845–848 (2011). https://doi.org/10.3103/S0967091211100202
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091211100202