Abstract
TSK-K-25 slag-forming mixture is chosen for the production of 500 × 500 mm square billet on a vertical continuous-casting machine. This mixture permits the casting of 45ХГМА steel at reduced speed (0.07–0.14 m/min).
Similar content being viewed by others
References
Smirnov, A.N., Tsuprun, A.Yu., Pimonenko, V.A., and Panov, V.V., Optimizing Ladle Operation in the Ladle Furnace Unit at the UBiVT Plant, Naukovi pratsi DonDTU (Scientific Proceedings of Donetsk Technical University), Donetsk: Metalurgiya, DonDTU, 2002, no. 40.
Shablovskii, V.A., Sirchenko, V.I., Oleksa, R.P., et al., Effective Mixtures for Steel Casting, Trudy vtorogo kongressa staleplavil’shchikov (Lipetsk, 12–15 oktyabrya 1993 g.) (Proceedings of Second Congress of Steel-Smelting Specialists, Lipetsk, October 12–15, 1993), Moscow: Chermetinformatsiya, 1994, pp. 332–334.
Moore, A., Phillips, R.J., and Gibbs, Y.R., An Overview for the Requirements of Continuous Casting Mould Fluxes, FOSECO Inc. 1991 Steelmaking Conference Proceedings, http://www.foseco-steel.com/steel/home/index.php
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.I. Monyakov, E.A. Kobolev, V.A. Shablovskii, A.V. Klyuchkin, A.Yu. Tsuprun, 2011, published in “Stal’,” 2011, No. 10, pp. 16–18.
About this article
Cite this article
Monyakov, V.I., Kobolev, E.A., Shablovskii, V.A. et al. Selection of the slag-forming mixture in continuous casting of 45ХГМА steel. Steel Transl. 41, 830–833 (2011). https://doi.org/10.3103/S0967091211100135
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091211100135