Abstract
Computer classification of a wide range of steels in terms of their plasticity in the temperature range of hot plastic deformation is proposed. Taxonometric analysis is selected as the means of classification. The results of classification may be used in introducing new products at various pressure-treatment systems, in order to permit rapid selection of appropriate hot-deformation conditions, by analogy with the conditions for comparable existing products.
Similar content being viewed by others
References
Dzugutov, M.Ya., Napryazheniya i razryvy pri obrabotke metallov davleniem (Stress and Failure in the Pressure Treatment of Metals), Moscow: Metallurgiya, 1974.
Dzugutov, M.Ya., Plastichnost’ i deformiruemost’ vysokolegirovannykh stalei i splavov (Plasticity and Deformability of High-Alloy Steel and Complex Alloys), Moscow: Metallurgiya, 1990, 3rd ed.
Polukhin, P.I., Gorelik, S.S., and Vorontsov, V.K., Fizicheskie osnovy plasticheskoi deformatsii: uch. posobie dlya vuzov (Physical Principles of Plastic Deformation: A University Textbook), Moscow: Metallurgiya, 1982.
Weber, K.H., Freiberger Forschungshefte, 1969, vol. 143, p. 253.
Plyuta, V., Sravnitel’nyi mnogomernyi analiz v ekonomicheskikh issledovaniyakh: metody taksonomii i faktornogo analiza (Comparative Multidimensional Analysis in Economic Research: Taxonomic Methods and Factorial Analysis), Moscow: Statistika, 1980.
Gol’dshtein, M.I., Grachev, S.V., and Vekhsler, Yu.G., Spetsial’nye stali: uchebnik dlya vuzov (Special Steels: A University Textbook), Moscow: Metallurgiya, 1985.
Mezhdunarodnyi translyator sovremennykh stalei i splavov (International Translator of Modern Steels and Alloys), Kershenbaum, V.S., Ed., Moscow: MIE, 1992, vol. 1.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Brinza, A.V. Brinza, 2010, published in “Stal’,” 2010, No. 7, pp. 66–71.
About this article
Cite this article
Brinza, V.V., Brinza, A.V. Classification of steels in terms of limiting plasticity in hot pressure treatment. Steel Transl. 40, 655–661 (2010). https://doi.org/10.3103/S0967091210070119
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210070119