Abstract
The production of rolled bar and complex profiles from continuous-cast slab is considered. The proposed method includes water-based cooling systems and the introduction of consumable macrocooling units in the melt. This approach significantly reduces the axial segregation of chemical elements and the structural inhomogeneity of the blank, improves the plastic properties and improved strength of the rolled bar, and reduces the metal consumption.
Similar content being viewed by others
References
Isaev, O.B., Vorob’ev, A.V., Nosochenko, O.V., et al., Development and Introduction of Systems for the Production of Rolled Bar and Profiles from Continuous-Cast Slab, Metallurg. Gornorud. Prom., 2003, no. 8, pp. 87–91.
Nikolaev, G.A., Nosochenko, O.V., Isaev, O.B., et al., Ukrainian Patent 17359, Byull. Izobret., 1994, no. 4.
Nosochenko, O.V., Revtov, M.I., Isaev, O.B., et al., Ukrainian Patent 4927, Byull. Izobret., 1994, no. 7.
Grabovii, V.M., Tsurkin, V.M., Isaev, O.B., et al., Ukrainian Patent 40053, Byull. Izobret., 2001, no. 6.
Author information
Authors and Affiliations
Additional information
Original Russian Text © O.B. Isaev, 2010, published in “Stal’,” 2010, No. 2, pp. 14–16.
About this article
Cite this article
Isaev, O.B. Cooling systems in the continuous casting of slabs. Steel Transl. 40, 131–133 (2010). https://doi.org/10.3103/S0967091210020087
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210020087