Abstract
Methods of regulating the flatness of rolled strip are considered, and the corresponding control principles are classified.
Similar content being viewed by others
References
Zheleznov, Yu.D., Prokatka rovnykh listov i polos (Rolling Uniform Sheet and Strip), Moscow: Metallurgiya, 1971.
Romashkevich, L.F., Masal’skii, Ya.S., and Bozhko, Yu.P., Foreign Practice in Regulating the Profile and Shape of Hot-Rolled Strip and Sheet, Chern. Metall: Byull. NTI, 1987, no. 13, pp. 20–30.
Lemper, G., Russian Patent 2208486, Byull. Izobret., 2002, no. 20, pp. 611–612.
Beinfest, B.Ya. and Rokotyan, S.E., Razvitie konstruktsii listovykh stanov dlya prokatki polosy tochnogo profilya v SSSR i za rubezhom (Design of Sheet Mills for Rolling Thin Strip in the USSR and Elsewhere), Moscow: NIIin-formtyzahmash (Metallurgicheskoe Oborudovanie), 1976, no. 1-76-30.
Autzinger, D., Jumlidja, G, Nigius, T., et al., Improving the Profile and Planarity of Hot-Rolled Strip, Stal, 2003, no. 12, pp. 37–40.
Maksimov, E.A., Shatalov, R.L., and Boskamdzhiev, N.Sh., Proizvodstvo planshetnykh polos pri prokatke (Production of Flat Strip in Rolling), Moscow: Teplotekhnika, 2008.
Bald, W., Beisemann, G., Feldmann, H., and Schultes, T., Continuously Variable Crown (CVC) Rolling, Iron Steel Eng., 1987, vol. 64, no. 3, pp. 32–41.
The UPC Technology Modernization of Hot Strip Mills, Specifically with Regard to Profile Control, Mannesman Demag (Germany) Prospectus, 1987.
Feldman, H., Holdman, F., Beisemann, G., and Gertner, H., Soviet Patent 1355112, Byull. Izobret., 1987, no. 43, p. 260.
Feldman, H., Schultes, T., and Beisemann, G., Soviet Patent 1816235, Byull. Izobret., 1993, no. 18, p. 169.
Vier, I.V., Saltanik, V.M., Poletskov, P.P., and Antipenko, V.A., Russian Patent 48285, Byull. Izobret., 2005, no. 28, p. 1061.
Finstermann, G., Comparison of Cold Rolling in Four-and Six-Roller Cells, Metallurg. Proizv. Tekhnol. Metallurg. Prots. (Russk. Izd.), 2007, no. 2, pp. 36–45.
Kartushov, B.P., Kuryatnikov, A.V., Potapov, I.N., et al., USSR Inventor’s Certificate 719716, Byull. Izobret., 1980, no. 9, p. 45.
Salganik, V.M., Pesin, A.M., Chebotov, V.M., and Larikov, S.P., USSR Inventor’s Certificate 1526855, Byull. Izobret., 1989, no. 45, p. 55.
Braunshtein, E.R., Demidov, V.M., Bykov, A.A., et al., Russian Inventor’s Certificate 2152277, Byull. Izobret., 2000, no. 19, p. 417.
Bel’skii, S.M., Mukhin, Yu.A., and Bakhaev, K.V., Russian Patent 2344888, Byull. Izobret., 2000, no. 3, p. 1123.
Bel’skii, S.M., Calculation of Residual Stress after Thin-Strip Rolling by an Energy Method, Vesti Vyssh. Uchebn. Zaved., Chernozen’ya, 2007, no. 3, pp. 96–100.
Kotsar’, S.L., Polyakov, B.A., Bel’skii, S.M., and Tret’yakov, V.A., USSR Inventor’s Certificate 1761314, Byull. Izobret., 1992, no. 34, p. 45.
Fedorov, N.N., Bot’ev, V.V., and Fedorov, N.A., USSR Inventor’s Certificate 1574294, Byull. Izobret., 1990, no. 24, p. 25.
Timoshenko, L.V., Timofeev, A.Yu., Chmelev, A.A., et al., USSR Inventor’s Certificate 1435333, Byull. Izobret., 1988, no. 41, p. 35.
Fedorov, N.N., Saprykin, V.A., Fedorov, N.A., and Rubtsov, Yu.T., USSR Inventor’s Certificate 1629117, Byull. Izobret., 1991, no. 7, p. 39.
Yur’ev, A.B., Fedorov, N.N., Kuznetsov, I.S., et al., USSR Inventor’s Certificate 2284233, Byull. Izobret., 2006, no. 27, p. 76.
Khimich, G.L., Strip Stability with Alternating Nonuniformity of the Deformation, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1984, no. 12, pp. 47–50.
Khimich, G.L., Votyakov, V.A., Rudakov, V.A., and Struzhanov, V.V., USSR Inventor’s Certificate 1005972, Byull. Izobret., 1983, no. 11, p. 55.
Polyakov, B.A., Kostar, S.L., Baryshev, V.G., et al., USSR Inventor’s Certificate 1235570, Byull. Izobret., 1986, no. 21, p. 25.
Votyakov, V.A. and Rudakov, V.A., USSR Inventor’s Certificate 1197754, Byull. Izobret., 1985, no. 46, p. 39.
Smirnov, P.N., Osheverov, I.I., Belevskii, L.S., and Omel’chenko, B.Ya., USSR Inventor’s Certificate 1432202, Byull. Izobret., 1988, no. 34, p. 34.
Zigelaar, D.A., Lopez, M.E., and Dixon, E.E., Russian Patent 2264872, Byull. Izobret., 2005, no. 33, p. 71.
Konar, S.L., Polyakov, B.A., Baryshev, V.G., and Khaleev, V.I., Formation of the Profile of Hot-Rolled Strip under the Action of Nonuniform (over the Width) Intercell Cooling, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1985, no. 12, pp. 51–54.
Rudskoi, A.I. and Lunev, V.A., Teoriya i tekhnologiya prokatnogo proizvodstva (Rolling Theory and Technology), St Petersburg: Nauka, 2008.
Vydrin, V.N., Sidakov, N.V., Ostsemin, E.A., et al., USSR Inventor’s Certificate 1031546, Byull. Izobret., 1983, no. 28, p. 27.
Garber, E.A., Proizovodstvo prokata. Proizvodstvo kholodnokatanykh polos i listov (sortament, teoriya, tekhnologiya, oborudovanie) (Rolling Technology: Production of Cold-Rolled Strip and Sheet: Range, Theory, Technology, Equipment), Moscow: Teplotekhnik, 2007, vol. 1, part 1.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.M. Bel’skii, Yu.A. Mukhin, 2009, published in “Stal’,” 2009, No. 11, pp. 47–50.
About this article
Cite this article
Bel’skii, S.M., Mukhin, Y.A. Classification of regulation principles for strip flatness. Steel Transl. 39, 1012–1015 (2009). https://doi.org/10.3103/S0967091209110114
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091209110114