References
Lamukhin, A.M., Ziborov, A.V., Imgrunt, V.Ya., et al., Tests of the Soft Reduction System for a Continuous-Cast Slab with a Liquid Core, Stal, 2002, no. 3, pp. 57–59.
Stepanov, A.A., Ziborov, A.V., Kuntsov, N.I., et al., Producing Thick Sheet on a Vertical Roller-Conveyer System with Soft Reduction of the Continuous-Cast Billet, Metallurg, 2005, no. 6, p. 42.
Hayakama, S., Shinkai, M., and Kashima, T., Improvement of Center Quality of Continuous Cast Round Bloom with Soft Reduction, Third European Conference on Continuous Casting, Madrid, Spain, 1998, no. 1, pp. 225–233.
Sivesson, P., Wass, S., and Rodberg, B., Improvement of Center Porosity in Continuous-Casting Blooms by Mechanical Soft Reduction at the End of the Solidification Process, Third European Conference on Continuous Casting, Madrid, Spain, 1998, no. 1, pp. 213–225.
Budanov, L.V., Korzukhin, L.G., Parfenov, E.P., et al., Mashiny nepreryvnogo lit’ya (teoriya i raschet) (Continuous-Casting Machine: Theory and Calculation), Yekaterinburg: Marat, 2004.
Parshin, V.M. and Chertov, A.D., Quality Control of Continuous-Cast Billet, Stal, 2005, no. 1, pp. 20–29.
Kuklev, A.V., Sosini, V.V., and Pozdnyakov, V.A., Formation of Axial Chemical Inhomogeneity in Continuous-Cast Slabs, Stal, 2003, no. 8, pp. 71–75.
Samoilovich, Yu.A., Formirovanie slitka (Ingot Formation), Moscow: Metallurgiya, 1977.
Teplovye protsessy pri nepreryvnom lit’e stali (Thermal Processes in the Continuous Casting of Steel), Samoilovich, Yu.A., Ed., Moscow: Metallurgiya, 1982.
Borisov, V.T., Teoriya dvukhfaznyoi zony metallicheskikh slitkov (Theory of the Two-Phase Zone in Metal Ingots), Moscow: Metallurgiya, 1987.
Bochvar, A.A. and Zhadieva, O.S., Theory of Shrinkage in Alloys, Tr. MITsMiZ (Proceedings of Moscow Institute of Nonferrous Metals and Billet), Moscow: MITsMiZ, 1940, issue 9, pp. 534–545.
Bochvar, A.A. and Novikov, I.I., Solid-Liquid State of Alloys during Solidification, Tekhnologiya tsvetnykh metallov (Technology of Nonferrous Metals), Moscow: MITsMiZ, 1952, issue 23, pp. 5–23.
Udovik, O.A., Yakovkin, V.N., and Yakobshe, R.Ya., Elastic Characteristics of Low- and Moderate-Carbon Steel in the Range 20–1400°C, Progressivnye sposoby polucheniya stal’nykh slitkov (Progressive Methods of Steel-Ingot Production), Kiev: Institute Problem Lit’ya, 1980, pp. 121–127.
Thomas, B.G., Issues in Thermal-Mechanical Modeling of Casting Processes, ISIJ Intern., 1995, vol. 35, no. 6, pp. 737–743.
Puhringer, O.M., Billet Formation in a Continuous-Casting Machine, Ferrous Metals (Germany), 1976, no. 6, pp. 3–9.
Sedov, L.I., Mekhanika sploshnoi sredy (Continuum Mechanics), Moscow: Nauka, 1973, 2nd ed.
Samoilovich, Yu.A., Kristallizatsiya slitka v elektromagnitnom pole (Ingot Solidification in an Electromagnetic Field), Moscow: Metallurgiya, 1986.
Udovik, O.A., Yakobshe, R.Ya., and Efimov, V.A., Poisson’s Ratio at the Solidification Temperature, Progressivnye sposoby polucheniya stal’nykh slitkov (Progressive Methods of Steel-Ingot Production), Kiev: Institute Problem Lit’ya, 1980, pp. 158–161.
Skok, Yu.Ya., Steel Failure Close to the Solidus Temperature, Stal, 1994, no. 3, pp. 27–30.
Nakagawa, T., Umeda, T., Murata, J., and Niwa, N., Deformation Behavior during Solidification of Steel, ISIJ Intern., 1995, vol. 35, no. 6, pp. 723–729.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.A. Samoilovich, 2009, published in “Stal’,” 2009, No. 2, pp. 20–25.
About this article
Cite this article
Samoilovich, Y.A. Destruction of the dendritic bridge in soft reduction of continuous-cast slab. Steel Transl. 39, 146–151 (2009). https://doi.org/10.3103/S0967091209020132
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091209020132