References
Makarov, Yu.D., Nedorezov, I.V., Beloglazov, E.G., et al., Development and Introduction of the Hot Sheet-Rolling Mill Program, Metallurg, 2007, no. 3, pp. 66–67.
Khimich, G.L. and Tsalyuk, M.B., Optimizatsiya rezhimov kholodnoi prokatki na ETsVM (Computer Optimization of Cold Rolling), Moscow: Metallurgiya, 1973.
Volegov, I.V., Nedorezov, I.V., and Nesterova, N.D., Some Results of ANSYS Calculations in the Design of OMZ Rolling Equipment and Presses, Trudy III konf. pol’zovatelei programmnogo obespecheniya CAD-FEM GmbH (Proc. III Conf. of CAD-FEM Software Users), Moscow: Poligon-Press, 2003, pp. 340–346.
Volegov, I.V., Nedorezov, I.V., and Nesterova, N.D., Some Results of ANSYS Calculations in the Design of Cold-Rolling Equipment, Materialy IV mezhdunar. nauch.-tekhn. konf. Informatsionnye tekhnologii v proizvodstvennykh, sotsial’nykh i ekonomicheskikh protsessakh (Infotekh-2004) (Proceedings of Infotekh-2004: IV Intern. Conf. on Information Technology in Production, Social, and Economic Processes), Cherepovets: GOU VPO ChGU, 2005, pp. 87–89.
Volegov, I.V. and Nesterova, N.D., Stress-Strain State of Loading and Unloading Equipment in Cold-Rolling Mills, Trudy konferentsii i seminarov Nedelya metallov v Moskve (Proceedings of Moscow Metal Week Conferences and Seminars), Moscow, 2005, pp. 269–271.
Kogaev, V.P., Makhutin, N.A., and Gusenkov, A.P., Raschety detalei mashin i konstruktsii na prochnost’ i dolgovechnost’: spravochnik (Calculating the Strength and Life of Machine Parts and Structures: A Handbook), Moscow: Mashinostroenie, 1985.
Serensen, S.V., Kogaev, V.P., and Shneiderovich, R.M., Nesushchaya sposobnost’ i raschety detalei mashin na prochnost’: sprav. posobie (Carrying Capacity and Strength Calculations of Machine Parts: A Handbook), Moscow: Mashinostroenie, 1975.
Author information
Authors and Affiliations
Additional information
Original Russian Text © I.V. Nedorezov, E.G. Beloglazov, N.D. Nesterova, T.A. Mezrina, Yu.D. Makarov, 2008, published in “Stal’,” 2008, No. 11, pp. 108–110.
About this article
Cite this article
Nedorezov, I.V., Beloglazov, E.G., Nesterova, N.D. et al. Estimating the strength and remaining life of roller mills. Steel Transl. 38, 935–938 (2008). https://doi.org/10.3103/S0967091208110144
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091208110144