References
Piptyuk, V.P., Polyakov, V.F., Pavlyuchenkov, I.A., et al., Steel Treatment in a Ladle-Furnace Unit, Metally Lit. Ukr., 2007, no. 4, pp. 13–16.
Vikhlevshchuk, V.A., Piptyuk, V.P., Bolotov, V.Yu., et al., Simulation of the Hydrodynamics of the Slag-Metal Bath in an AC Ladle-Furnace Unit, Mat. Modelirovanie, 2005, no. 1(13), pp. 53–58.
Piptyuk, V.P., Bolotov, V.Yu., Vikhlevshchuk, V.A., et al., Simulation of Heat and Mass Transfer in the Treatment of Metal Melt in an AC Ladle-Furnace Unit, Mat. Modelirovaniya, 2005, no. 2(14), pp. 49–56.
Samokhvalov, S.E., Distinguishing the Physical Factors Responsible for Nonsolenoidal Motion of Gas-Liquid Mixtures, Inzh.-Fiz. Zh., 1995, no. 3, pp. 454–459.
Samokhvalov, S.E., Teplofizychni protsesy v bagatofaznykh seredovyshchakh: teoretychni osnovy kom’yuternogo modelyuvannya (Thermophysical Processes in Multiphase Media: Theoretical Principles of Computer Modeling), Dniprodzerzhinsk: DDTU, 1994.
Piptyuk, V.P., Krikent, I.V., Samokhvalov, S.E., et al., Melt Mixing under the Action of Electromagnetic Forces in an AC Ladle-Furnace Unit, Trudy IX Mezhdunar. kongressa staleplavil’shchikov (Proc. IX Intern. Congress of Steel-Smelting Specialists), Moscow: Chermetinformatsiya, 2007, pp. 416–421.
Piptyuk, V.P., Polyakov, V.F., Polyakov, V.A., et al., Simulation of Steel Treatment in a Ladle-Furnace Unit, Metally Lit. Ukr., 2006, no. 1, pp. 48–54.
Piptyuk, V.P., Bolotov, V.Yu., Vikhlevshchuk, V.A., et al., Simulation of the Formation of Synthetic Refining Slag in an AC Ladle-Furnace Unit, Mat. Modelyuvannya, 2006, no. 1–2(15), pp. 90–93.
Piptyuk, V.P., Bolotov, V.Yu., Vikhlevshchuk, V.A., et al., Adjustment of Steel Composition by Means of Chunk Additives in a Ladle-Furnace Unit, Teor. Prakt. Metallurgii, 2006, no. 1, pp. 28–33.
Piptyuk, V.P., Bolotov, V.Yu., Pavlyuchenkov, I.A., et al., Formation of Refining Slag from Solid Slag-Forming Mixtures in an AC Ladle-Furnace Unit, Trudy IX Mezhdunar. kongressa staleplavil’shchikov (Proc. IX Intern. Congress of Steel-Smelting Specialists), Moscow: Chermetinformatsiya, 2007, pp. 421–424.
Piptyuk, V.P., Bolotov, V.Yu., Pavlyuchenkov, I.A., et al., Investigation of Slag Formation and Adjustment of Steel Composition in a Ladle-Furnace Unit by Mathematical Simulation of Hydrodynamics and Heat and Mass Transfer, Mat. VII Mezhdunar. konf. Teplomassoobmennye protsessy v metallurgicheskikh sistemakh (Proc. VII Intern. Conference on Heat and Mass Transfer in Metallurgical Systems), Mariupol, 2006, pp. 102–107.
Vikhlevshchuk, V.A., Dubina, O.V., Polyakov, V.A., et al., Nauchnye i tekhnologicheskie osnovy proizvodstva armaturnykh stalei novogo pokoleniya (Scientific and Technological Principles for the Production of a New Generation of Reinforcing Steel), Kiev: Naukova Dumka, 2001.
Gol’dfarb, E.M. and Potapov, B.B., Determining the Heat Flux for Lining Heating as a Function of the Permissible Stress, Ogneupory, 1974, no. 6, pp. 18–21.
Piptyuk, V.P., Samokhvalov, S.K., Pavlyuchenkov, I.A., et al., Numerical Investigation of the Hydrodynamics and Heat and Mass Transfer of Melt in the Ladle of a DC Ladle-Furnace Unit, Problemy matematychnogo modelyuvannya (Mathematical Modeling), Dnipropdzerzhinsk: DDTU, 2007, pp. 120–121.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.P. Piptyuk, S.E. Samokhvalov, I.A. Pavlyuchenkov, D.N. Turunov, E.N. Dymchenko, S.V. Grekov, 2007, published in “Stal’,” 2007, No. 11, pp. 46–50.
A.G. Kovalenko, V.A. Burshitin, and R.R. Gnyp participated in this research.
About this article
Cite this article
Piptyuk, V.P., Samokhvalov, S.E., Pavlyuchenkov, I.A. et al. Mass and heat transfer in 140-t AC ladle-furnace unit. Steel Transl. 37, 943–947 (2007). https://doi.org/10.3103/S0967091207110125
Issue Date:
DOI: https://doi.org/10.3103/S0967091207110125