References
Lipnyagov, S. V. and Chernyshov, D. Yu., Introducing Reducing Mills in the Line of the TPA-80 Pipe-Rolling Unit at OAO SinTZ, Pipes 2006 (Proc. XIV Intern. Conf.), Chelyabinsk: RosNITI, 2006, vol. 2, pp. 29–33.
Kharitonov, E. A., Potapov, I. N., Vol’shonok, I. Z., et al., Selecting the Basic Rolling Parameters for the RSP-800 Mill, Tsvet. Met., 1993, no. 11, pp. 48–51.
Potapov, I. N. and Polukhin, P. I., Tekhnologiya vintovoi prokatki (Screw Rolling), Moscow: Metallurgiya, 1990, 2nd ed.
Teterin, P. K., Teoriya poperechnoi i vintovoi prokatki (Theory of Transverse and Screw Rolling), Moscow: Metallurgiya, 1983.
Khaikin, B. E. and Kozlov, V. V., A Single Formula for the Shape Change in Rolling Both Simple and Faceted Profiles, Teoriya prokatki (Rolling Theory), Moscow: Metallurgiya, 1975, pp. 195–197.
Klempert, E. D., Golubchik, R. M., Merkulov, D. V., et al., Piercing Blanks with Different Extension, Dostizheniya v teorii i praktike trubnogo proizvodsva (Accomplishments in the Theory and Practice of Pipe Production), Yekaterinburg: UGTU-UPI, 2004, pp. 218–283.
Zhavoronkov, V. A., Mukhin, G. G., and Levaeva, G. V., Screw Rolling of Round Profiles from Cast Blanks, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1974, no. 4, pp. 139–141.
Potapov, I. N., Zimin, V. Ya., Kharitonov, E. A., and Romanenko, V. P., USSR Inventor’s Certificate 749459 USSR, Byul. Izobr., 1980, no. 27, p. 22.
Potapov, I. N., Kharitonov, E. A., and Zimin, V. Ya., USSR Inventor’s Certificate 747541, Byul. Izobr., 1980, no. 26, pp. 25–26.
Golubchik, R. M., Polukhin, P. I., Potapov, I. N., et al., USSR Inventor’s Certificate 556854, Byul. Izobr., 1977, no. 17, pp. 28.
Potapov, I. N., Kharitonov, E. A., and Zimin, V. Ya., USSR Inventor’s Certificate 778833, Byul. Izobr., 1980, no. 42, p. 25.
Tyurin, V. A., Teoriya i protsessy kovki slitkov na pressakh (Ingot Forging on Presses), Moscow: Mashinostroenie, 1979.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.G. Chikalov, E.D. Klempert, R.M. Golubchik, D.V. Merkulov, M.V. Novikov, 2007, published in “Stal’,” 2007, No. 3, pp. 72–75.
About this article
Cite this article
Chikalov, S.G., Klempert, E.D., Golubchik, R.M. et al. Obtaining the required range of continuous-cast pipe blanks for piercing. Steel Transl. 37, 305–308 (2007). https://doi.org/10.3103/S096709120703031X
Issue Date:
DOI: https://doi.org/10.3103/S096709120703031X