Abstract
The introduction of kerogen-70 into a solution of shale phenols and thiokol in furfural resulted in the production of a polymer material with an adhesive strength to 9.5 MPa, a cohesion to 16.6 MPa, and a bending strength to 25 MPa. It can be used as high-quality structural filling.
Similar content being viewed by others
References
Pokonova, Yu.V., Khim. Tverd. Topl. (Moscow), 2008, no. 3, p. 38.
Pokonova, Yu.V., Khim. Tverd. Topl. (Moscow), 2008, no. 4, p. 47.
Pokonova, Yu.V. and Proskuryakov, V.A., Khimiya i tekhnologiya slantsevykh fenolov (Chemistry and Technology of Shale Phenols), Leningrad: Izd. LGU, 1979.
Pokonova, Yu.V., Metodicheskie ukazaniya po tekhnologii polucheniya kompozitsionnykh materialov (Manual on the Technology of Composite Materials), Leningrad: Izd. LTI im. Lensoveta, 1984.
Korshak, V.V., Obshchie metody sinteza vysokomolekulyarnykh soedinenii (General Methods for the Synthesis of High-Molecular-Weight Compounds), Moscow: Khimiya, 1953.
Romanova, L.A. Komlev, V.K., et al., Stroit. Mater., 1981, no. 5, p. 18.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.V. Pokonova, 2009, published in Khimiya Tverdogo Topliva, 2009, No. 4, pp. 49–52.
About this article
Cite this article
Pokonova, Y.V. Preparation of a polymer material with the use of shale products. Soil Fuel Chem. 43, 238–240 (2009). https://doi.org/10.3103/S0361521909040107
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0361521909040107