Abstract
A flow injection system for the sequential determination of chloride and sodium in instant soups is described. The chloride is measured with a tubular chloride ion selective electrode with a membrane consisting of a homogeneous mixture of silver chloride and silver sulfide, and the sodium is measured by flame emission spectrometry. Results were in good agreement with the reference procedures and exhibited good precision (relative standard deviations less than 1.1%). The sampling rate was 150 samples per hour.
Similar content being viewed by others
References
Association of Official Analytical Chemists (AOAC) “Official Methods of Analysis (14th ed.)”, Association of Official Analytical Chemists Inc., Arlington, 1984.
B. R. Chapman and I. R. Goldsmith, Analyst [London], 107, 1014 (1982).
L. Balulescu, Food Technoi, 1985, 38.
V. Kuban, Crit. Rev. Anal Chem., 23, 15 (1993).
I. M. P. L. V. O. Ferreira and J. L. F. C. Lima, J. Flow Injection Anal, 10, 17 (1993).
I. M. P. L. V. O. Ferreira, J. L. F. C. Lima and L. S. M. Rocha, Presenilis’ J. Anal. Chem., 347, 314 (1993).
I. M. P. L. V. O. Ferreira and J. L. F. C. Lima, Analyst [London], 119, 209 (1994).
S. Alegret, J. Alonso, J. Bartroli, A. A. S. C. Machado, J. L. F. C. Lima and J. M. Paulis, Quint. Anal., 6, 278 (1987).
J. L. F. C. Lima and L. S. M. Rocha, Int. J. Fhviron. Anal Chem., 38, 127 (1990).
A. J. Frend, G. J. Moody, J. D. R. Thomas and B. J. Birch, Analyst [London], 108, 1357 (1983).
J. L. F. C. Lima and A. O. S. S. Rangel, Am. J. Enol. Vitic., 41, 284 (1990).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ferreira, I.M.P.L.V.O., Lima, J.L.F.C. & Rangel, A.O.S.S. Flow Injection Sequential Determination of Chloride by Potentiometry and Sodium by Flame Emission Spectrometry in Instant Soups. ANAL. SCI. 10, 801–805 (1994). https://doi.org/10.2116/analsci.10.801
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.2116/analsci.10.801