Abstract
Polyethylene-nanocomposites with CaCO3-weight fractions from 0 to 15 wt.% were prepared by in-situ polymerization with Me2Si(Ind)2ZrCl2/MAO metallocene catalysts. A high activity especially in the presence of TIBA was observed. The morphology was investigated by using raster electron microscopy (REM) showing that the CaCO3-nanoparticles are uniformly distributed. The melting temperatures and the crystallization temperatures are not much influenced by increasing filler content.
Similar content being viewed by others
References
Andrews, R., Jaques, D., Quian, D., Rantell, T., 2002. Multiwall carbon nanotubes: synthesis and application. Acc. Chem. Res., 35(12):1008–1017. [doi:10.1021/ar010151m]
Beyer, G., 2001. Nanocomposites. Part 2. A novel flame protection system for polymers. Gummi, Fasern, Kunststoffe, 54(5):321–325.
Bharadwaj, R.K., 2001. Modeling the barrier properties of polymer-layered silicate nanocomposites. Macromolecules, 34(26):9189–9192. [doi:10.1021/ma010780b]
Gorrasi, G., Tortora, M., Vittoria, V., Kaempfer, D., Mülhaupt, R., 2003. Transport properties of organic vapors in nanocomposites of organophilic layered silicate and syndiotactic polypropylene. Polymer, 44(13):3679–3685. [doi:10.1016/S0032-3861(03)00284-2]
Kaminsky, W., 1996. New polymers by metallocene catalysis. Macromol. Chem. Phys., 197(12):3907–3945. [doi:10.1002/macp.1996.021971201]
Kaminsky, W., 2004. The discovery of metallocene catalysts and their present state of the art. J. Poly. Sci., 42(16): 3911–3921. [doi:10.1002/pola.20292]
Kaminsky, W., Wiemann, K., 2003. Polypropene/silicananocomposites synthesized by in-situ polymerization. Expected Materials for the Future, 3(11):6–12.
Kaminsky, W., Wiemann, K., 2006. Polypropene nanocomposites by methallocene/MAO catalysts. Composite Interfaces, 13(4):365–375. [doi:10.1163/156855406777408557]
Kaminsky, W., Funck, A., Wiemann, K., 2006. Nanocomposites by in situ polymerisation of olefins with metallocene catalysts. Macromol. Symp., 239(1):1–6. [doi:10.1002/masy.200690084]
Kharchenko, S.B., Douglas, J.F., Obrzut, J., Grulke, E.A., Migler, K.B., 2004. Flow-induced properties of nanotube-filled polymer materials. Nat. Mater., 3(8):564–568. [doi:10.1038/nmat1183]
Mülhaupt, R., Engelhardt, T., Schall, N., 2001. Nanocomposites-auf dem Weg zur Anwendung. KU Kunststoffe, 91(10):178–190.
Scheirs, J., Kaminsky, W. (Eds.), 2000. Metallocene-Based Polyolefins, Volume 2. Wiley Series, Chichester.
Wei, L., Tang, T., Huang, B., 2004. Synthesis and characterization of polyethylene/clay-silica nanocomposites: A montmorillonite/silica-hybrid-supported catalyst and in situ polymerization. Journal of Polymer Science Part A: Polymer Chemistry, 42(4):941–949. [doi:10.1002/pola.11053]
Wiemann, K., Kaminsky, W., Gojny, F., Schulte, K., 2005. Synthesis and properties of syndiotactic poly(propylene)/carbon nanofiber and nanotube composites prepared by in situ polymerization with metallocene/MAO catalysts. Macromol. Chem. Phys., 206(15):1472–1478. [doi:10.1002/macp.200500066]
Zilg, C., Reichert, P., Dietsche, F., Engelhardt, T., Mülhaupt, R., 1998. Plastics and rubher nanocomposites based upon layered silicates. Kunststoffe, 88(10):1812–1820.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Scharlach, K., Kaminsky, W. PE/CaCO3-nanocomposites synthesized by in-situ polymerization. J. Zhejiang Univ. - Sci. A 8, 987–990 (2007). https://doi.org/10.1631/jzus.2007.A0987
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2007.A0987