Abstract
Cadmium Zinc Telluride (CZT) semiconductor crystal properties have been studied extensively with a focus on correlations to their radiation detector performance. The need for defect-free CZT crystal is imperative for optimal detector performance. Extended defects like Tellurium (Te) inclusions, twins, sub-grain boundaries, and dislocations are common defects found in CZT crystals; they alter the electrical properties and, therefore, the crystal’s response to high energy radiation. In this research we studied the extended defects in CZT crystals from two separate ingots grown using the low-pressure Bridgman technique. We fabricated several detectors cut from wafers of two separate ingots by dicing, lapping, polishing, etching and applying gold metal contacts on the main surfaces of the crystals. Using infrared (IR) transmission microscope we analyzed the defects observed in the CZT detectors, showing three dimensional scans and plot size distributions of Te inclusions, twins and sub-grain boundaries observed in particular regions of the CZT detectors. We characterized electrical properties of the detectors by measuring bulk resistivity and detector response to gamma radiation. We observed that CZT detectors with more extended defects showed poor opto-electrical properties compared to detectors with fewer defects.
Similar content being viewed by others
References
B.D. Milbrath, A.J. Peurrung, M. Bliss, and W.J. Weber: Radiation detector materials: An overview. J. Mater. Res., Vol. 23, No. 10, (Oct 2008)
Lucile C. Teague, Martine C. Duff, James R. Cadieux, RajiSoundararajan, Charles R. ShickJr, Kelvin G. Lynn: Characterization of etch pit formation via the Everson-etching method on CdZnTe crystal surfaces from the bulk to the nanoscale. Nuclear Instruments and Methods in Physics Research A 652 (2011) 178–182
A. Hossain, S. Babalola, A. E. Bolotnikov, G. S. Camarda, Y. Cui, G. Yang, M. Guo, D. Kochanowska, A. Mycielski, A. Burge and R. B. James: Effect of chemical etching on the surface roughness of CdZnTe and CdMnTe gamma radiation detectors. BNL-81418-2008-CP
Synchrotron White Beam X‐Ray Topography X19C. Brookhaven National Laboratory (BNL) Upton, NY 11973
David R. Black, Gabrielle G. Long: X-Ray Topography. Material Science and Technology Laboratory (April 2004), Nist special publication 960–10
A.E. Bolotnikov, S. Babalola, G.S. Camarda, Y. Cui, S.U. Egarievwe, A. Hossain, G. Yang, and R.B. James: Material Properties Limiting the Performance of CZT Gamma-Ray Detectors
Michael Prokescha and Csaba Szeles: Accurate measurement of electrical bulk resistivity and surface leakage of CdZnTe radiation detector crystals. Journal of Applied Physics 100, 014503 (2006)
Uri Lachish: CdTe and CdZnTe Crystal growth and fabrication of gamma radiation detectors guma science, P.O. Box 2104, Rehovot 76120, Israel
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Uba, S., Babalola, S., Hossain, A. et al. Characterization of Extended Defects Observed in Cadmium Zinc Telluride (CZT) Crystal. MRS Online Proceedings Library 1792, 263 (2015). https://doi.org/10.1557/opl.2015.535
Published:
DOI: https://doi.org/10.1557/opl.2015.535