Avoid common mistakes on your manuscript.
In regards to the original publication of this article [1], the authors would like to correct the following:
-
1.
In Figure 2(a), the displayed equation should be “y = 1.106x-0.0425”.
-
2.
In Equation (11), the term “fspecimen” should be placed at the denominator, after 0.398.
Reference
D. Casari, L. Pethö, P. Schürch, X. Maeder, L. Philippe, J. Michler, P. Zysset, and J. Schwiedrzik: A self-aligning microtensile setup: Application to single-crystal GaAs microscale tension–compression asymmetry. Journal of Materials Research, 34, 14 (2019).
Additional information
The online version of the original article can be found at https://doi.org/10.1557/jmr.2019.183
Rights and permissions
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Casari, D., Pethö, L., Schürch, P. et al. Erratum: A self-aligning microtensile setup: Application to single-crystal GaAs microscale tension–compression asymmetry-CORRIGENDUM. Journal of Materials Research 35, 1347 (2020). https://doi.org/10.1557/jmr.2020.47
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2020.47