References
A.S. Argon, V. Gupta, H.S. Landis, and J.A. Cornie, Mater. Sci. & Eng. A 107 (1989) p. 41.
A.S. Argon, V. Gupta, H.S. Landis, and J.A. Cornie, J. Mater. Sci. 24 (1989) p. 1207.
V. Gupta, A.S. Argon, and J.A. Cornie, J. Mater. Sci. 24 (1989) p. 2031.
A.G. Evans, Mater. Sci. & Eng. A 107 (1989) p. 227.
A. Maheshwari, K.K. Chawla, and T.A. Michalske, Mater. Sci. & Eng. A 107 (1989) p. 269.
A.G. Varias, N.P. O’Dowd, R.J. Asaro, and C.F. Shih, Mater. Sci. & Eng. A 126 (1990) p. 65.
A.G. Evans, M. Ruhle, B.J. Dalgleish, and P.G. Charalambides, Met. Trans. A 21A (1990) p. 2419.
J.-S. Wang and Z. Suo, Acta Metallurgica 38 (1990) p. 1279.
Z. Suo, PhD thesis, Harvard University, 1989.
J.H. Rose, J.R. Smith, and J. Ferrante, Phys. Rev. B 28 (1983) p. 1835.
J.H. Rose, J.R. Smith, F. Guinea, and J. Ferrante, Phys. Rev. B 29 (1984) p. 2963.
J. Ferrante and J.R. Smith, Phy. Rev. B 31 (1985) p. 3427.
A.A. Griffith, Phil. Trans. Roy. Soc. (London) A221 (1920) p. 163.
V. Gupta, A.S. Argon, J.A. Cornie, and D.M. Parks, J. Mech. Phys. Solids, in press.
J.H. Rose, J. Ferrante, and J.R. Smith, Phy. Rev. Letts. 47,9 (1981) p. 675.
J.H. Rose (private communication).
B.R. Lawn and T.R. Wilshaw, Fracture of Brittle Solids, (Cambridge University Press, 1975).
J.R. Rice, in Chemistry and Physics of Fracture, edited by R.M. Latanision and R.H. Jones (Martinus Nijhoff, Drodrecht, 1987) p. 22.
J.R. Rice, J. Appl. Mech. 55 (1988) p. 98.
J.R. Rice and J.-S. Wang, Mater. Sci. & Eng. A 107 (1989) p. 23.
J.J. Gilman, J. Appl. Phys. 31 (1960) p. 2208.
S.S. Chiang, D.B. Marshal, and A.G. Evans in Surfaces and Interfaces in Ceramic and Ceramic-Metal Systems, edited by J. Pask and A.G. Evans (Materials Science Research, Vol. 14, Plenum Press, New York, 1981) p. 603–617.
K.L. Mittal, ASTM STP 640 (1978) p. 5–17.
General Electric Aircraft Engines Division, Cincinnati, Ohio (private communication).
V. Gupta, A.S. Argon, J.A. Cornie, and D.M. Parks, Mater. Sci. & Eng. A 126 (1990) p. 105.
J.A. Cornie, A.S. Argon, and V. Gupta, “Designing Interfaces in Inorganic Matrix Composites,” in this issue.
V. Gupta and A.S. Argon, “Measurement of the Anisotropic Strength and Toughness of Pitch-55 Carbon Ribbons,” J. Mater. Sci., in press.
V. Gupta, PhD thesis, Massachusetts Institute of Technology, 1990.
G. Simmons and H. Wang, Single Crystal Elastic Constants and Calculated Aggregate Properties, 2nd edition (Massachusetts Institute of Technology, 1971).
Q. Li, J. Megusar, L.J. Masur, and J.A. Cornie, Mater. Sci. & Eng. A 117 (1989) p. 199.
J.R. Rice, in Proc. First International Conference on Fracture, edited by T. Yokobori, T. Kawasaki, and J.L. Swedlow (Japanese Society for Strength and Fracture of Materials 1, Sendai, Japan, 1965) p. 309–340.
J.W. Hutchinson and Z. Suo, to appear in Advances in Applied Mechanics, Vol. 28, edited by J. W. Hutchinson and T.Y. Wu (Academic Press, 1991); Harvard University Report: MECH 164, Division of Applied Sciences, Harvard University.
Rights and permissions
About this article
Cite this article
Gupta, V. An Evaluation of the Interface Tensile Strength—Toughness Relationship. MRS Bulletin 16, 39–45 (1991). https://doi.org/10.1557/S0883769400057092
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400057092