Abstract
Computer simulations have been designed to elucidate the evolution of microcracking in a nanocomposite using appropriate material values for alumina and silicon carbide. These are compared to a single-phase material using elastic and thermal expansion coefficients for alumina. It is found that the region and the fracture mode where microcracking ensues are determined by the intensity and the length scale of the residual stress fields, which interact. Of specific interest are the region, fracture mode, and length of ensuing microcracks for materials with different inclusion locations (at the grain boundary or within the grain) and with different grain size to inclusion size ratios.
Similar content being viewed by others
References
S.J. Bennison and B.R. Lawn, Acta Metall. 37, 2659 (1989).
A. Zimmermann and J. Rödel, J. Am. Ceram. Soc. 81, 2527 (1998).
F.F. Lange, J. Am. Ceram. Soc. 72, 3 (1989).
N. Ramachandran and D.K. Shetty, J. Am. Ceram. Soc. 74, 2634 (1991).
K. Niihara, J. Ceram. Soc. Jpn. 99, 974 (1991).
M. Sternitzke, J. Eur. Ceram. Soc. 17, 1061 (1997).
L.C. Stearns and M.P. Harmer, J. Am. Ceram. Soc. 79, 3013 (1996).
J. Zhao, L.C. Stearns, M.P. Harmer, H.M. Chan, G.A. Miller, and R.F. Cook, J. Am. Ceram. Soc. 76, 503 (1993).
M. Hoffman and J. Rödel, J. Am. Ceram. Soc. Jpn. 105, 1086 (1997).
I. Levin, W.D. Kaplan, D.G. Brandon, and A.A. Layyous, J. Am. Ceram. Soc. 78, 254 (1995).
G. Pezzotti, V. Sergio, K. Ota, O. Sbaizero, N. Muraki, T. Nishida, and M. Sakai, J. Ceram. Soc. Jpn. 104, 497 (1996).
R. Todd, M. Bourke, C. Borsa, and R. Brook, Acta Mater. 45, 1791 (1997).
J. Perez-Rigueiro, J.Y. Pastor, J. Llorca, M. Elices, P. Miranzo, and J.S. Moya, Acta Mater. 46, 5399 (1998).
L. Carroll, M. Sternitzke, and B. Derby, Acta Metall. Mater. 44, 4543 (1996).
Y. Xu, A. Zangvil, and A. Kerber, J. Eur. Ceram. Soc. 17, 921 (1997).
A. Zimmermann, W.C. Carter, and E.R. Fuller, Jr. (unpublished).
N. Sridhar, W. Yang, D.J. Srolovitz, and E.R. Fuller, Jr., J. Am. Ceram. Soc. 77, 1123 (1994).
M.P. Anderson, D.J. Srolovitz, P.S. Sahni, and G.S. Grest, Acta Metall. 32, 793 (1984).
M. Hoffman, J. Rödel, M. Sternitzke, and R. Brook, in Fracture Mechanics of Ceramics, edited by R.C. Bradt, D.P.H. Hasselman, D. Munz, M. Sakai and V.Y. Shevchenko (Plenum Press, New York, 1996), Vol. 12 p. 179.
G.S. Grest, M.P. Anderson, and D.J. Srolovitz, Philos. Mag. B 59, 293 (1988).
J.B. Wachtman, Jr., W.E. Tefft, D.G. Lam, Jr., and R.P. Stinchfield, J. Res. Natl. Bur. Stand. (U.S.) 43, 213 (1960).
W. Kreher and W. Pompe, Internal Stresses in Heterogeneous Solids (Akademie-Verlag, Berlin, 1989).
D. Munz and T. Fett, Mechanisches Verhalten keramischer Werkstoffe (Springer-Verlag, Berlin, 1989).
W.C. Carter, S.A. Langer, and E.R. Fuller, Jr., The OOF Manual: Version 1.0, NISTIR 6256 (National Institute of Standards and Technology, Gaithersburg, MD, 1998).
A. Jagota and S.J. Bennison, Modelling Simul. Mater. Sci. Eng. 3, 485 (1995).
T. Ohji, Y-K. Jeong, Y-H. Choa, and K. Niihara, J. Am. Ceram. Soc. 81, 1453 (1998).
P. Merkert, M. Hoffman, and J. Rödel, J. Eur. Ceram. Soc. 18, 1645 (1998).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zimmermann, A., Hoffman, M. & Rödel, J. Fracture mode of alumina/silicon carbide nanocomposites. Journal of Materials Research 15, 107–114 (2000). https://doi.org/10.1557/JMR.2000.0019
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2000.0019