Abstract
Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings, deposited by filtered cathodic arc (FCA), direct ion beam (IB), electron cyclotron resonance plasma chemical vapor deposition (ECR-CVD), and sputter (SP) deposition processes on Si substrate have been conducted using a nanoindenter with a nanoscratch attachment and an accelerated ball-on-flat tribometer. Coating thicknesses of 20, 10, 5 nm and, for the first time, 3.5 nm coatings have been investigated. It was found the FCA coating exhibits the highest hardness and elastic modulus, followed by the ECR-CVD, IB, and SP coatings. In general, the thicker coatings exhibited better scratch/wear performance than the thinner coatings due to their better load-carrying capacity as compared to the thinner coatings. At 20 nm, the FCA and ECR-CVD coatings show the best scratch and wear resistance, while the IB and ECR-CVD coatings show the best scratch and wear resistance at 10 nm. Five nanometer thick coatings show reasonable scratch and wear resistance, while 3.5 nm thick coatings show extremely low load-carrying capacity and poor scratch and wear resistance. It appears that the 3.5 nm coatings studied are unfeasible for scratch and wear resistance applications as of now.
Similar content being viewed by others
References
A. H. Lettington, Carbon 36, 555–560 (1998).
B. K. Gupta and B. Bhushan, Wear 190, 110–122 (1995).
B. Bhushan and V. N. Koinkar, Surf. Coat. Technol. 76–77, 655–669 (1995).
S. T. Patton and B. Bhushan, Wear 202, 99–109 (1996).
B. Bhushan, Tribology and Mechanics of Magnetic Storage Devices, 2nd ed. (Springer-Verlag, New York, 1996).
B. Bhushan, Proc. 9th Annual Workshop on Micro Electro Mechanical Systems (IEEE, New York, 1996), pp. 91–98.
Tribology Issues and Opportunities in MEMS, edited by B. Bhushan (Kluwer Academic Pub., Dordrecht, The Netherlands, 1998).
B. Bhushan, Handbook of Micro/Nanotribology, 2nd ed. (CRC, Boca Raton, FL, 1999).
B. K. Gupta and B. Bhushan, Thin Solid Films 270, 391–398 (1995).
X. Li and B. Bhushan, Wear 220, 51–58 (1998).
J. Suzuki and S. Okada, Jpn. J. Appl. Phys. 34, 1218–1220 (1995).
S. J. Bull, Diam. Relat. Mater. 4, 827–836 (1995).
B. Bhushan, B. K. Gupta, and M. Azarian, Wear 181–183, 743–758 (1995).
K. Holmberg and A. Matthews, Coatings Tribology: Properties, Techniques and Applications in Surface Engineering (Elsevier, New York, 1994).
B. Bhushan and B. K. Gupta, Handbook of Tribology: Materials, Coatings and Surface Treatments (Krieger Publishing, Malabar, FL, 1997).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, X., Bhushan, B. Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings. Journal of Materials Research 14, 2328–2337 (1999). https://doi.org/10.1557/JMR.1999.0309
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1999.0309