Abstract
A simple electrochemical method is described for producing metal or semiconductor nanowires with diameters in the continuous range 10 to 200 nm. The technique involves a three-step process that begins with the electrochemical generation of an aluminum oxide template with uniform nanometer-sized pores, followed by the deposition of metal or semiconductor in them. The nanowires are then exposed for study or device fabrication by etching back the oxide matrix. Examples of cadmium nanowires fabricated by this technique are shown.
Similar content being viewed by others
References
Science 254, Nov. 29 (1991).
(a) Proc. Farad. Symp. 25, J. Chem. Soc. Farad. Trans. 86 (13) (1990). (b) Elemental and Molecular Clusters, edited by G. Benedek, T. P. Martin, and G. Pacchioni (Springer, Berlin, 1987). (c) Large Finite Systems, edited by J. Jortner, A. Pullman, and B. Pullman (Reidel, Dordrecht, 1987). (d) Metal Clusters, edited by M. Moskovits (John Wiley, New York, 1986). (e) Metal Clusters, edited by M. Träger and F. ZuPutlitz (Springer, Berlin, 1986). (f) Farad. Disc. Chem. Soc, No. 86 (1988).
Nanostructure Physics and Fabrication, Proc. Int. Symp., College Station, TX, March 1989, edited by M.A. Reed and W.P. Kirk (Academic Press, New York, 1989); Science and Engineering of One- and Zero-dimensional Semiconductors, edited by S.P. Beaumont and C. M. Sotomayor Torres, NATO-ASI Ser. B. (Plenum, New York, 1990), Vol. 214.
M.L. Steigerwald and L.E. Brus, Ann. Rev. Mater. Sci. 19, 471 (1989); A.N. Goldstein, C.M. Echer, and A. P. Alivisatos, Science 256, 1425 (1992); M.G. Bawendi, P.J. Carroll, W.J. Wilson, and L. E. Brus, J. Chem. Phys. 96, 946 (1992).
G.A. Ozin, Adv. Mater. 4, 612 (1992); D.W. Breck, Zeolite Molecular Sieves (Krieger, Malabar, 1984).
J.W. Diggle, T.C. Downie, and C.W. Goulding, Chem. Rev. 69, 365 (1969); G.E. Thompson and G.C. Wood, in Treatise on Materials Science and Technology, edited by J. C. Scully (Academic Press, New York, 1983), Vol. 23, Ch. 5 and references therein.
J.P. O’Sullivan and G.C. Wood, Proc. R. Soc. London A 317, 511 (1970); R.C. Furneaux, Trans. Inst. Metal Finish. 61 (1983); R.C. Furneaux, G.E. Thompson, and G.C. Wood, Corros. Sci. 18, 853 (1978).
(a) A. W. Brace and P. G. Sheasby, Technicopy, Stonehouse, 197 (1979). (b) L. Sandera, Aluminum 49, 533 (1973). (c) W. Sautter, G. Ibe, and J. Meier, Aluminum 50, 143 (1974). (d) A. S. Doughty, G. E. Thompson, J. A. Richardson, and G. C. Wood, Trans. Inst. Metal Finish. 53, 33, 161 (1975). (e) D. G. W. Goad and M. Moskovits, J. Appl. Phys. 49, 2929 (1978). (f) CK. Preston and M. Moskovits, J. Phys. Chem. 92, 2957 (1988).
D. Al-Mawlawi, N. Coombs, and M. Moskovits, J. Appl. Phys. 70, 979 (1991).
D. Al-Mawlawi, M. Moskovits, D. S. Ellis, A. Williams, and J. M. Xu, Proc. Int. Semicond. Dev. Res. Symp., University of Virginia (in press).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Al-Mawlawi, D., Liu, C.Z. & Moskovits, M. Nanowires formed in anodic oxide nanotemplates. Journal of Materials Research 9, 1014–1018 (1994). https://doi.org/10.1557/JMR.1994.1014
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1994.1014