Abstract
Alumina aerogels were prepared using supercritical drying methods, and their thermal properties were examined. The effects of several additives to the alumina aerogel and supercritical drying methods were examined in order to improve heat resistance. Silica, phosphoric oxide, barium oxide, lanthanum oxide, and SiC whisker were effective for maintaining a high specific surface area of the alumina aerogel at a temperature over 1200 °C. Silica was found to be the most effective among the additives. The addition of 10 mol % silica resulted in an alumina aerogel with the highest specific surface area, 114.3 m2/g at 1200 °C, and increased the transformation temperature to α alumina. Barium oxide and lanthanum oxide formed smaller crystals within the alumina, compared with those of alumina alone. SiC whisker caused many cracks in the alumina aerogel. When supercritically dried, the alumina aerogel was strengthened by treatment at higher temperature and pressure.
Similar content being viewed by others
References
S. S. Kistler, J. Phys. Chem. 36, 52 (1932).
S. S. Kistler, S. Swann, and E. G. Appel, Ind. Eng. Chem. 26, 388 (1934).
M. Cantin, M. Casse, L. Koch, R. Jouan, P. Mestreau, D. Roussell, F. Bonnin, J. Moutel, and S. J. Teichner, J. Nucl. Instrum. Methods 18, 177 (1974).
M. Rubin and C. M. Lampert, Solar Energy Mater. 7, 393 (1983).
M. Gronauer, A. Kadur, and J. Fricke, in Aerogels, Proceedings of the First International Symposium (Springer-Verlag, Berlin, 1986), p. 38.
G. E. E. Grades, G. M. Pajonk, and S. J. Teichner, J. Catal. 33, 145 (1974).
W.C. Conner, G.M. Pajonk, and S.J. Teichner, Adv. Catal. 34, 1 (1986).
G. E. E. Grades, G. M. Pajonk, and S. J. Teichner, Bull. Soc. Chim. Fr. 1321 (1973).
S.J. Teichner, G. A. Nicolaon, M. A. Vicarini, and G. E. E. Grades, Adv. Colloid Interf. Sci. 5, 245 (1976).
L.D. Pfefferte and W.C. Pfefferte, Catal. Rev. Sci. 29, 219 (1987).
Y. Mizushima and M. Hori, Appl. Catal. A: General 88, 137 (1992).
B. E. Yoldas, J. Mater. Sci. 12, 1203 (1977).
D. C. Bradley, R. C. Mehrotra, and D. P. Gaur, Metal Alkoxides (Academic Press, London, 1978), pp. 308–334.
Jpn. Patent No. 62-322846.
M. Machida, K. Eguchi, and H. Arai, Chem. Lett. 1993 (1986).
M. Machida, K. Eguchi, and H. Arai, Bull. Chem. Soc. Jpn. 61, 3659 (1988).
B. E. Yoldas, J. Mater. Sci. 11, 465 (1976).
M. Hori and T. Fujiyama, Proc. Annu. Meeting Ceram. Jpn. 42 (1989).
O. Yamaguchi, H. Omaki, K. Takaoka, and K. Shimizu, J. Powd. Powd. Metall. Jpn. 23, 143 (1976).
K. Yamada, New Glass 4, 50 (1990).
T. Okubo, M. Watanabe, K. Kusakabe, and S. Morooka, Chem. Eng. Jpn. 53, 755 (1989).
Y. Mizushima and M. Hori, J. Non-Cryst. Solids (1993, in press).
T. Ogawa, S. Yamada, T. Miki, H. Tsuiki, N. Kakuta, Y. Suzuki, K. Koyama, S. Nogochi, and M. Yamada, Bull. Chem. Soc. Jpn. 62, 1844 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mizushima, Y., Hori, M. Preparation of heat-resistant alumina aerogels. Journal of Materials Research 8, 2993–2999 (1993). https://doi.org/10.1557/JMR.1993.2993
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1993.2993