Abstract
A new regime of hillock growth has been observed in patterned Al98.5 W.%Si1.0 Wt.%-Cuo0.5 wt.% films. The “surface” hillock and “side” hillock, which have been seen previously, form on patterned metal lines having linewidths greater than the larger Al alloy grain sizes (∼3 μm). None is seen on the fabricated lines having linewidths between 0.9 and 2 μm where long-range grain boundary diffusion cannot occur because of its bamboo structure. However, a new type of hillock, the “line hillock”, occurs in structures having linewidths of 0.6 μm. The presence of this last type of hillock is inconsistent with the current understanding of hillock formation and may present severe restrictions on the down-sizing of ultra–large–scale integrated devices.
Similar content being viewed by others
References
M. S. Jackson and C. Y. Li, Acta Metall. 30, 1993 (1982).
T. J. Faith, J. Appl. Phys. 52, 4630 (1981).
K. Hinode, N. Owada, T. Nishida, and K. Mukai, J. Vac. Sci. Technol. B5, 518 (1987).
M. Murakami, H. C. W. Huang, J. Angilello, and B. L. Gilbert, J. Appl. Phys. 54, 738 (1983).
C. Y. Chang, R. W. Vook, and Y. C. Lee, Thin Solid Films 181, 57 (1989).
C. Y. Chang and R. W. Vook, J. Mater. Res. 4, 1172 (1989).
S. K. Sharma, S. U. M. Rao, and N. Kumar, Thin Solid Films 142, L95 (1986).
S. Roberts and P. J. Dobson, Thin Solid Films 135, 137 (1986).
H. Hieber and T. Simon, IEEE 24th Int. Rel. Phys. Symp., 253 (1986).
D. S. Gardner, T. L. Nichalka, T. W. Barbee, K. C. Saraswat, J. P. McVittie, and J. D. Meindl, Proc. 1st Int. VLSI Multilevel Interconnect Conference, 68 (1984).
T. Bonifield, private communication.
K. Hinode, I. Asoan, and Y. Homma, IEEE ED-36, 1050 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pico, C.A., Bonifield, T.D. Hillocks on half-micron aluminum lines. Journal of Materials Research 6, 1817–1819 (1991). https://doi.org/10.1557/JMR.1991.1817
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1991.1817