Abstract
Tungsten wire for incandescent lamp filaments must operate at high temperatures and for long times. To meet these requirements, the grain morphology of the wire must be controlled to reduce the propensity for grain boundary sliding. The morphology is a function of the distribution of very small pockets of potassium in the wire and the mechanical processing from ingot to wire. The behavior of the filament is directly related to the grain morphology. This paper describes the mechanism by which the potassium is incorporated into and distributed in the ingot. The elongation and spheroidization of the bubbles during hot rolling and swaging are also examined and related to the grain morphology of wire. Some indications of the relationship between grain morphology and filament behavior are also given.
Similar content being viewed by others
References
J. L. Walter and K. A. Lou, J. Mater. Sci. 24, 3577 (1989).
R. Haubner, W. D. Schubert, H. Hellmer, E. Lassner, and B. Lux, Proc. 11th Plansee Seminar 2, 161 (1985).
R. Haubner, W. D. Schubert, E. Lassner, and B. Lux, ibid., p. 69.
J. L. Walter, K. A. Lou, and M. R. Vukcevich, Proc. 12th Plansee Seminar 1, 493 (1989).
J. L. Walter, P. Rao, and R. R. Russell, Metall. Trans. A 6A, 1775 (1975).
C. L. Briant and J. L. Walter, Proc. 12th Plansee Seminar 1, 151 (1989).
Lord Rayleigh, Proc. London Math. Soc. 10, 4 (1878).
D. M. Moon, R. Stickler, and A. L. Wolfe, Proc. 6th Plansee Seminar, 67 (1968).
D. B. Snow, Metall. Trans. A 7A, 783 (1976).
J. L. Walter, Trans. TMS-AIME 239, 272 (1967).
C. L. Briant and J. L. Walter, Acta Metall. 36, 2503 (1988).
J. L. Walter, C. L. Briant, and E. F. Koch, Metall. Trans. A 13A, 1501 (1982).
J. L. Walter, J. Applied Phys. 60, 3343 (1986).
J. L. Walter and E. F. Koch, to be published in J. Mater. Sci.
L. R. Kehman, W. D. Wilkinson, and F. L. Yagge, Argonne Nat. Lab. Report ANL-4417 (1950).
R. Raj and M. F. Ashby, Metall. Trans. 2, 1113 (1971).
P. Adam and H. Wever, Surf. Sci. 21, 307 (1970).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Walter, J.L., Briant, C.L. Tungsten wire for incandescent lamps. Journal of Materials Research 5, 2004–2022 (1990). https://doi.org/10.1557/JMR.1990.2004
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1990.2004