Abstract
This paper is devoted to thermal spraying and presents the state of our current knowledge, as well as the following research or development needs: spraying heat sources, i.e., flame, high-velocity oxifuel flame (HVOF), detonation gun (D-Gun), and plasma torches; particle heat and momentum transfer (measurements and modeling), process on-line control, powder morphologies, and injection within the hot jet and reactions with environment; coating formation, i.e., particle flattening and solidification, splat layering, residual stresses, coating microstructure, and properties; and reliability and reproducibility of coatings.
Similar content being viewed by others
References
Thermal Spraying, American Welding Society, Miami, FL, 1985, p. 181.
L. Pawlowski: The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, New York, NY, 1995.
E. Morf: U.S. Patent 28,001 A.D., 1912.
P.J. Meyer and D. Hawley: in Thermal Spray Coatings: Properties, Processes and Applications, T. F. Bernecki, ed., ASM International, Materials Park, OH, 1991, pp. 29–38.
A. Freslon: in Thermal Spray Science and Technology, C. C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 57–63.
T. Lewis, L. Sokol, and E. Hanna: in Thermal Spray, Advances in Coatings Technology, D.L. Houck, ed., ASM International, Materials Park, OH, 1988, pp. 149–55.
T. Morischita: Plasma Technik 2nd Symp., S. Blum-Sandmeier, H. Eschnauer, P. Huber, and A.R. Nicoll., eds., Plasma Technik Wohlen, Wohlen, CH, 1991, vol. 1, pp. 137–45.
M.I. Boulos: J. Thermal Spray Technol., 1991, vol. 1 (1), pp. 33–48.
D.J. Varacalle, G. Irons, R.J. Lalumiere, W.D. Swank, and J. Lagerquist: in Thermal Spray Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, vol. 1, pp. 529–35.
T.C. Mc Geary and J. M. Koffskey: Met. Progr., 1965, Jan., pp. 80–86.
M.L. Thorpe and H.J. Richter: J. Thermal Spray Technol., 1992, vol. 1 (2), pp. 161–70.
J.A. Browning: J. Thermal Spray Technol., 1992, vol. 1 (4), pp. 289–92.
R.W. Smith and R. Novak: Powder Metall. Int., 1991, vol. 3, pp. 147–65.
M.L. Thorpe: Adv. Mater. Processes, 1993, vol. 3, pp. 50–61.
F. Kassabji, G. Jacq, and J.P. Durand: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1677–80.
J.R. Fincke, W.D. Swank, D.C. Haggard, T.M. Pemeny, S.M. Pandit, and A.R. Kashani: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 123–28.
C. Moreau: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1681–93.
M. Thorpe: Process Market Segmentation, invited lecture presented at 8th National Thermal Spray Conf., Boston, MA, 1995.
C. Moreau, M. Lamontagne, and P. Cielo: U.S. Patent 5, 180, 921, Nov. 1991.
J. Wigren, M.O. Hansson, P. Gougeon, and C. Moreau: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 675–81.
J.A. Brogan, C.C. Berndt, A. Claudon, and C. Coddet: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 221–26.
M.L. Allan, C.C. Berndt, J.A. Brogan, and D. Otterson: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 13–18.
E. Lugscheider, C. Herbst, and A. Fischer: in Thermal Spray: Meeting the Challenges of the 21st Century, C.C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 19–24.
R. Dominguez, F. Monerie-Moulin, A. Vardelle, and P. Fauchais: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 245–51.
P.J. Loustannau and D. Horton: Mater. Performance, 1994, July, pp. 32–35.
E. Kadyrov and V. Kadyrov: J. Thermal Spray Technol., 1995, vol. 4 (3), pp. 280–86.
E. Kadyrov: J. Thermal Spray Technol., 1996, vol. 5 (2), pp. 185–95.
J.R. Fincke, W.D. Swank, and D.C. Haggard: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 325–30.
H.H. Tawfik and F. Zimmerman: J. Thermal Spray Technol., 1997, vol. 6 (3), pp. 345–52.
B. Hassan, A. R. Lopez, and W.L. Oberkampf: J. Thermal Spray Technol., 1998, vol. 7 (1), pp. 71–77.
J.R. Fincke, W.D. Swank, C.L. Jeffery, and C.A. Mancaso: Meas. Sci. Technol., 1993, vol. 4, pp. 56–62.
J.R. Fincke, W.D. Swank, and D.C. Haggard: in Thermal Spray: Industrial Applications, eds., C. C. Berndt and S. Sampath, ASM International, Materials Park, OH, 1994, pp. 325–30.
H. Voggenreiter, H. Huber, S. Beyer, and H.J. Spies: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 303–08.
J.A. Browning: Viewing the Future of HVOF and HVAF Thermal Spraying, presented at the Materials Solutions Conf., Rosemont, IL, Oct. 1998, ASM International, Materials Park, OH, 1998.
K. Korpiola and P. Vuoristo: in Thermal Spray: Practical Solutions for Engineering Problems, C. C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 177–84.
C.M. Hackett and G.S. Settles: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 135–40.
J.A. Browning: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 387–90.
L. Jacobs, M.M. Hyland, and M. De Bonte: J. Thermal Spray Technol., 1998, vol. 7 (2), pp. 213–18.
X. Zhou and J.V. Heberlein: Plasma Sources Sci. Technol., 1994, vol. 3, pp. 564–74.
X. Zhou and J.V. Heberlein: Plasma Chem. Plasma Processing, 1996, vol. 16 (1), pp. 229S-244S.
M. Ushio, K. Tanaka, and M. Tanaka: in Heat and Mass Transfer under Plasma Conditions, P. Fauchais, ed., Begell House, New York, NY, 1995, pp. 265–72.
K. Tanaka and M. Ushio: Proc. 12th Int. Symp. on Plasma Chemistry, Minneapolis, MN, Aug. 21–25, 1995, J.V. Heberlein, ed., University of Minneapolis, Minneapolis, MN, 1995, pp. 1527–33.
J. Wigren, L. Pejryd, and H. Karisson: in Thermal Spray: Science and Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 243–49.
M.P. Planche: Ph.D. Thesis, University of Limoges, Limoges, 1995, 37–1995.
Z. Duan, L. Bell, M.P. Planche, J.V. Heberlein, E. Pfender, and M. Stachowicz: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 407–11.
M. Cao, F. Gitzhofer, D.V. Gravelle, R. Henne, and M.I. Boulos: Plasma Sources Sci. Technol., 1997, vol. 6, pp. 39–45.
J.M. Leger, P. Fauchais, A. Grimaud, M. Vardelle, A. Vardelle, and B. Pateyron: in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 407–11.
S. Janisson, E. Meillot, A. Vardelle, J.F. Coudert, B. Pateyron, and P. Fauchais: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 803–08.
V. Gourlaouen, F. Remy, J.M. Leger, and J. Sattonnet: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 797–802.
M.P. Collares and E. Pfender: 13th Int. Symp. on Plasma Chemistry, C.K. Wu, ed., Beijing University Press, Beijing, 1997, pp. 161–66.
AR. Nicoll: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 7–13.
K. Yushenko, Y. Borisov, Y. Pereverzev, S. Vojnarovitch, V. Darmochval, V. Bobric, P. Ramaekers, and G. Roa: in Thermal Spray: Meeting the Challenges of the 21st Century, C.C. Coddet, ed., ASM International, Materials Park, OH, 1997, pp. 1461–67.
C. Moreau, P. Gougeon, A. Burgess, and D. Ross: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 141–47.
A. Kobayashi and T. Kitamura: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 439–44.
J. Zierhut, P. Haslbeck, K.D. Landes, G. Barbezat, M. Muller, and M. Schutzl: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1375–79.
A. Bunya, H. Taneto, M. Kitoh, S. Fukami, I. Itoh, and H. Nagasaka: in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 99–104.
T. Bernecki: Proc. Nat. Thermal Spray Conf., D.L. Houck, ed., ASM International, Materials Park, OH, 1989, pp. 63–70.
P. Chraska and M. Hrabovsky: in Thermal Spray International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 81–86.
K. Dobble, J.R.T. Branco, S. Sampath, H. Herman, and P. Chraska: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 413–18.
M. Hrabovsky, V. Kopecky, and V. Sember: in Heat and Mass Transfer under Plasma Conditions, P. Fauchais, ed., Begell House, New York, NY, 1995, pp. 91–97.
F. Ladru, E. Lugscheider, H. Jungklaus, C. Herbst, and I. Kvernes: in Thermal Spray: Science and Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 175–81.
V.S. Klubnikin: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1399–1403.
P. Roumilhac: Ph.D. Thesis, University of Limoges, Limoges, 1990.
B. Pateyron, M.F. Elchinger, G. Delluc, and P. Fauchais: Plasma Chem. Plasma Processes, 1996, vol. 16 (1), pp. 39–58.
Y. Borisov, A. Borisova, V. Golnik, A. Murashov, and V. Bobrik: in Thermal Spray: Practical Solutions for Engineering Problems, C. C. Berndt, ed., ASM International, Maternals Park, OH, 1996, pp. 757–63.
E. Lugsheider and I. Russ: in Thermal Spray Coatings: Research, Design and Applications, C. C. Berndt and T. F. Bernecki, ed., ASM International, Materials Park, OH, 1993, pp. 329–35.
E. Lugscheider and I. Rass: in Thermal Spray Coatings: Research, Design and Applications, C. C. Berndt and T. F. Bernecki, eds., ASM International, Materials Park, OH, 1993, pp. 329–33.
A.A. Verstak, P.A. Vityaz, and R.W. Smith: in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 281–90.
N. Minami, T. Hongawa, Y. Nojiri, M. Nishida, T. Araki, and M. Katsumura: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1381–86.
D.A. Jager, D. Stover, and W. Schlump: in Thermal Spray: International Advances in Coating Technology, C. C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 69–75.
S. Sodeoka, M. Suzuki, T. Inoue, and K. Ueno: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1437–41.
M.I. Boulos: Proc. 13th Int. Symp. on Plasma Chemistry, Beijing, Aug. 1997, C.K. Wu, ed., Beijing University Press, Beijing, 1997, pp. 89–95.
K. Mailhot, F. Gitzhofer, and M.I. Boulos: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 21–25.
M. Kelkar, N. Hussary, J. Schein, and J.V. Heberlein: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 329–34.
T. Watanabe, X. Wang, J.V. Heberlein, E. Pfender, and W. Herwig: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1996, pp. 577–83.
R.H. Hunger, V.E. Belashchenko, W.R. Kratochvil, J.P. Dunkerley, V. Sedov, and E.A. Smith: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1489–93.
J. Sheard, J.V. Heberlein, K. Stelson, and E. Pfender: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 613–18.
V.F. Hock, R. Benary, R. Ganertz, and H. Herman: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 435–44.
T. Lester, D.J. Kingerley, S.J. Harris, and S P. Matthews: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 49–55.
B. Xu, X. Liu, S. Ma, and Z. Chen: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1039–42.
H. Llewellyn, P.S. Grant, A P. Newbery, and RM. Jordan: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 263–68.
H.D. Steffens, J. Wilden, and T. Duda: High Temp. Chem. Processes, 1994, vol. 3, pp. 653–64.
E.R. Sampson: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 133–37.
M.I. Boulos, P. Fauchais, A. Vardelle, and E. Pfender: in Plasma Spraying: Theory and Applications, R. Suryanarayanan, ed., World Scientific, Singapore, 1993, pp. 3–60.
W.L. Oberkampf and M. Talpallikar: J. Thermal Spray Technol., 1996, vol. 5 (1), pp. 53–61.
W.L. Oberkampf and M. Talpallikar: J. Thermal Spray Technol., 1996, vol. 5 (1), pp. 62–68.
Y.P. Chyou and E. Pfender: Plasma Chem. Plasma Proc., 1989, vol. 9, pp. 45–71.
C.H. Chang: in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 793–98.
B. Dussoubs, A. Vardelle, M. Vardelle, P. Fauchais, and N.J. Themelis: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 557–65.
A. Vardelle, N.J. Themelis, B. Dussoubs, M. Vardelle, and P. Fauchais: High Temp. Mater. Proc., 1995, vol. 1, pp. 295–313.
A. Vardelle, P. Fauchais, B. Dussoubs, and N.J. Themelis: Plasma Chem. Plasma Proc., 1998, vol. 18 (4), pp. 551–74.
O. Simonin, C. Delalondre, and P.L. Viollet: Pure Appl. Chem., 1992, vol. 64 (5), pp. 625–28.
P.C. Huang, J.V. Heberlein, and E. Pfender: Plasma Chem. Plasma Proc., 1995, vol. 15, pp. 25–46.
M.I. Boulos, P. Fauchais, and E. Pfender: Thermal Plasmas, Fundamentals and Applications, Plenum Press, New York, NY, 1994, vol. 1.
M.F. Elchinger, B. Pateyron, P. Fauchais, and A. Vardelle: Proc. 13th Int. Symp. on Plasma Chemistry, Beijing, Aug. 1997, C.K. Wu, ed., Beijing University Press, Beijing, 1997, pp. 1997–2003.
D. Nicoud, J.M. Leger, P. Fauchais, and A. Grimaud: European Patent 451,051, 1993.
A. Denoirjean, O. Lagnoux, P. Fauchais, and V. Sember: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 809–14.
V. Gourlaouen, F. Remy, J.M. Leger, and J. Sattonnet: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 797–801.
M. Rahmane, G. Soucy, and M.I. Boulos: Plasma Chem. Plasma Proc., 1996, vol. 16 (1), pp. 169S-189S.
P. Fauchais, J.F. Coudert, and M. Vardelle: in Plasma Diagnostics, O. Anciello and D.L. Flamm, eds., Academic Press, New York, NY, 1989, vol. I, Chap. 7, pp. 349–446.
P. Fauchais, J.F. Coudert, M. Vardelle, A. Vardelle, and A. Denoirjean: J. Thermal Spray Technol., 1992, vol. 1 (2), pp. 1117–28.
E. Pfender and C.H. Chang: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 315–27.
M.F. Smith, T.J. O’Hern, J.E. Brockmaann, R.A. Neiser, and T.J. Roemer: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 105–10.
J.R. Fincke, W.D. Swank, and C.L. Jeffery: IEEE Trans. Plasma Sci., 1990, vol. 18, pp. 948–57.
M. Vardelle, K.-I. Li, P. Fauchais, and C. Trassy: Proc. Thermal Plasma Processes Conf., Athens, Greece, P. Fauchais, ed., Begell House, New York, NY, 1997, pp. 173–79.
M. Vardelle, C. Trassy, A. Vardelle, and P. Fauchais: Plasma Chem. Plasma Proc., 1991, vol. 11 (2), pp. 185–201.
M. Vardelle, A. Vardelle, K.I. Li, P. Fauchais, and N.J. Themelis: Pure. Appl. Chem., 1996, vol. 68 (5), pp. 1093–99.
M. Vardelle, A. Vardelle, and P. Fauchais: J. Thermal Spray Technol., 1993, vol. 2 (1), pp. 79–92.
J.R. Fincke and W.D. Swank: in Thermal Spray: Coatings Properties, Processes and Applications, C.C. Berndt and T.F. Bernecki, eds., ASM International, Materials Park, OH, 1992, pp. 193–98.
R. McPherson: Thin Solid Films, 1981, vol. 83, pp. 297–310.
C. Moreau, P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil, and P. Cielo: in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 431–36.
C. Moreau, P. Gougeon, A. Burgess, and D. Ross: in Advances in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 141–47.
P. Gougeon, C. Moreau, and F. Richard: in Advances in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 149–55.
M. Prystag, P. Gougeon, and C. Moreau: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 517–23.
L. Leblanc, P. Gougeon, and C. Moreau: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 567–75.
L. Leblanc and C. Moreau: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 773–78.
L. Pejryd, J. Wygren, P. Gougeon, and C. Moreau: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 785–90.
W.D. Swank, J.R. Fincke, and D.C. Haggard: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 111–16.
D.L. Hale, W.D. Swank and D.C. Haggard: J. Thermal Spray Technol., 1998, vol. 7 (1), pp. 58–63.
M. Yamakawa, S. Oki, and S. Gohda: Proc. 1st Unified Thermal Spray Conference, Indianapolis, IN, Sept. 18–22, 1997, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 849–53.
J.E. Craig, R.A. Parker, D.Y. Lee, F. Biancaniello, and S. Rider: in Thermal Spraying: Meeting of the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998.
J. Knuutila, P. Saarenrinnen, R. Hernberg, T. Lehtinen and T. Mäntylä: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 577–82.
J. Vattulainen, J. Knuutila, T. Lehtinen, T. Mäntylä, and R. Hernberg: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 767–72.
M. Vardelle, P. Fauchais, A. Vardelle, and A.C. Leger: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 535–42.
E.J. Kubel, Jr.: Adv. Mater. Processes, 1990, Dec., pp. 24–32.
B. Kolman, J. Forman, J. Dubsky, and P. Chraska: Mikrochim. Acta, 1994, vol. 114–115, pp. 335–42.
J. Wigren, J.F. de Vries, and D. Greving: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 855–61.
A. Denoirjean, A. Vardelle, A. Grimaud, P. Fauchais, E. Lugsheider, I. Rass, H.L. Heijen, P. Chandler, R. McIntyre, and T. Cosak: in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 975–82.
M.E. Vinayo, F. Kassabji, J. Guyonnet, and P. Fauchais: J. Vac. Sci. Technol., 1985, vol. 3 (6), pp. 2483–89.
P. Diez and R.W. Smith: J. Thermal Spray Technol., 1993, vol. 2 (2), pp. 165–72.
J. Beczkowiak and G. Schwier: in Thermal Spray: Coatings Properties, Processes and Applications, C.C. Berndt and T.F. Bernecki, ed., ASM International, Materials Park, OH, 1991, pp. 121–26.
P. Vuoristo, T. Mantyla, L.M. Berger, and M. Nebelung: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 909–15.
W.J. Jarosinski, M.F. Gruninger, and C.H. Londry: in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and T.F. Bernecki, eds., ASM International, Materials Park, OH, pp. 153–57.
M.C. Kim, S.B. Kim, and J.W. Hong: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 791–95.
I.E. Anderson, D.J. Sordelet, M.F. Besser, and R.L. Terpstra: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 911–16.
X. Fan, F. Gitzhofer, and M.I. Boulos: J. Thermal Spray Technol., 1998, vol. 7 (2), pp. 247–53.
D.J. Sordelet, M.E. Besser, and M.J. Kramer: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 467–72.
D. Sordelet and M. Besser: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 419–28.
P. Pei, J. Kelly, S. Malghan, and S. Dapkunas: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 263–73.
Y. Borisov and A. Borisova: in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1993, pp. 429–35.
G.S. Cliche and S. Dallaire: in Thermal Spray Research and Applications, T.F. Bernecki, ed., ASM International, Materials Park, OH, 1990, pp. 761–65.
B. Wielage, K. Fleisher, and G. Zimmerman: in Thermal Spray: Practical solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 349–53.
H. Herman, Z.J. Chen, C.C. Huang, and R. Cohen: J. Thermal Spray Technol., 1992, vol. 1 (2), pp. 129–35.
H. Ageorges, A. Grimaud, and P. Fauchais: in Progress in Plasma Processing of Materials, P. Fauchais and J. Amouroux, ed., Begell House, New York, NY, 1999, pp. 467–72.
E. Bouyer, F. Gitzhofer, and M.I. Boulos: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 353–59.
K.I. Li, M. Vardelle, and P. Fauchais: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 45–50.
J.R. Fincke, W.D. Swank, and D.C. Haggard: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 335–42.
R.A. Neiser and T.J. Roemer: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 285–93.
M. Vardelle, A. Vardelle, B. Dussoubs, P. Fauchais, T.J. Roemer, R.A. Neiser, and M.F. Smith: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 887–94.
M. Vardelle, A. Vardelle, P. Fauchais: J. Thermal Spray Technol., 2001, vol. 10, accepted for publication.
P. Fauchais, M. Vardelle, A. Vardelle, I. Bianchi, and A.C. Leger: Plasma Chem Plasma Proc., 1996, vol. 16 (1), pp. 99S-126S.
B. Dussoubs: Ph.D. Thesis, University of Limoges, Limoges, 1998.
J.H. Clare and D.E. Crawmer: in Metals Handbook, 9th ed., vol. 5, Surface Cleaning Finishing and Coating, ASM International, Materials Park, OH, 1982, pp. 361–74.
C.M. Hackett and G.S. Settles: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 21–29.
C.M. Hackett and G.S. Settles: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 307–13.
K.I. Li, M. Vardelle, A. Vardelle, and P. Fauchais: in Thermal Spray: Practical solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 47–552.
K.A. Gross, P. Fauchais, A. Vardelle, J. Tikkanen, and J. Keskinen: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 543–48.
A. Haddadi, A. Grimaud, A. Denoirjean, F. Nardou, and P. Fauchais: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 615–22.
F. Salchert: in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and T.F. Bernecki, eds., ASM International, Materials Park, OH, 1993, pp. 279–83.
M. Brossa and E. Pfender: Plasma Chem. Plasma Processing, 1988, vol. 8 (1), pp. 75–84.
K. Korpiola, H. Jalkanen, T. Kinos, P. Sutonten, and P. Vuoristo: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 471–76.
A. Vardelle, P. Fauchais, and N.J. Themelis: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 175–80.
J.R. Fincke, W.D. Swank, and D.C. Haggard: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 325–31.
O. Lagnoux, A. Denoirjean, L. Bianchi, M.F. Elchinger, and P. Fauchais: in Progress in Plasma Processing of Materials, P. Fauchais, ed., Begell House, New York, NY, 1999.
G. Espié, P. Fauchais, B. Hannoyer, J.C. Labbe, and A. Vardelle: in Ann. NY Acad. Sci., 1999, vol. 891, pp. 143–51.
O. Lagnoux, J.F. Coudert, K. Wittmann, and P. Fauchais: in Thermal Spray Surface Engineering via Applied Research, C.C. Berndt, ed., ASM International, Materials Park, OH, 2000.
R.A. Neiser, M.F. Smith, and R.C. Dykhuizen: J. Thermal Spray Technol., 1998, vol. 7 (4), pp. 537–45.
H. Voggenreiter, H. Huber, S. Beyer, and H.J. Spies: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 303–08.
F. Monerie-Moulin, F. Gitzhofer, P. Fauchais, M.I. Boulos, and A. Vardelle: J. High Temp. Chem. Processes, 1992, vol. 1 (3), pp. 249–57.
V. Gourlaouen, B. Hanz, F. Remy, and C. Coddet: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1293–97.
V. Polka, M. Brezovsky, J. Ivan, and J. Sith: in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 537–42.
K. Volenik, J. Leitner, F. Hanousek, J. Dubsky, and B. Kolman: J. Thermal Spray Technol., 1997, vol. 6 (3), pp. 327–34.
V. Pershin, J. Mostaghimi, S. Chandra, and T. Coyle: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1305–08.
Y. Borisov, A. Chernyshov, V. Korzhick, A. Murashov, and V. Kalita: 2nd Plasma Technik Symp., S. Blum-Sandmeir, H. Eschnauer, P. Huber, and A.R. Nicoll, eds., Plasma Technik Wohlen CH, 1991, vol. 1, pp. 161–72.
O. Betoule, G. Soucy, M. Vardelle, P. Fauchais, M.I. Boulos, and M. Ducos: in Thermal Spray: Int. Advances in Coatings Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 773–79.
P. Sakov and R. Raghuraman: in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1993, pp. 369–75.
H.C. Chen, Z. Duan, J. Heberlein, and E. Pfender: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 553–61.
X. Wang, J. Heberlein, E. Pfender, and W. Gerberich: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 31–37.
R.W. Smith: Powder Metallurgy International, 1993, vol. 25 (1), pp. 9–16.
R.W. Smith and Z.Z. Mutasim: J. Thermal Spray Technol., 1992, vol. 1 (1), p. 57.
R.W. Smith, E. Lugscheider, P. Jokiel, U. Mueller, J. Merz, and M. Wilbert: in Thermal Spray: Research, Design and Applications, C.C. Berndt and T.F. Bernecki, eds., ASM International, Materials Park, OH, 1993, pp. 439–44.
R.W. Smith and M. Mohanty: in Thermal Spray Industrial Applications, C.C. Berndt and S.S. Sampath, ed., ASM International, Materials Park, OH, pp. 73–77.
E. Lugscheider, P. Remer, H. Reymann, L. Zhao, and R.W. Smith: Proc. TS 96, Essen, Germany, Mar. 6–8, 1996, DVS, Dusselfdorf, Germany, 1996, pp. 351–53.
E. Lugscheider, P. Remer, and L. Zhao: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 927–32.
W. Fan and T. Ishigaki: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1161–65.
H. Jones: J. Phys. D.: Appl. Physics, 1971, vol. 4, pp. 1657–60.
J. Madjeski: Int. J. Heat Mass Transfer, 1983, vol. 26, pp. 1095–98.
H. Fukanama: J. Thermal Spray Technol., 1994, vol. 3, pp. 33–44.
E.W. Collings, A.J. Markworth, J.K. McCoy, and J.H. Saunders: J. Mater. Sci., 1990, vol. 25, pp. 3677–82.
S. Chandra and C.T. Avedisian: Fall Technical Meeting of the Eastern States Section of the Combustion Institute, Orlando, FL, Dec. 1990.
T. Bennett and D. Poulikakos: J. Mater. Sci., 1993, vol. 28, pp. 961–70.
M. Pasandideh-Fard, Y.M. Qiav, S. Chandra, and J. Mosthagimi: Phys. Fluids, 1996, vol. 8, pp. 650–59.
H. Fukanama: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 647–56.
V.V. Sobolev, J.M. Guilemany, and A.J. Martin: J. Thermal Spray Technol., 1996, vol. 5 (2), pp. 207–14.
O.G. Engel: J. Res. Nat. Bur. Standards, 1955, vol. 54 (5), pp. 281–98.
Y.C. Huang, F.G. Hammitt, and W.J. Yang: J. Fluid Eng., 1973, pp. 276–94.
J.M. Houben: Ph.D. Thesis, University of Technology, Eindhoven, NL, 1988.
K. Turtani, M. Yao, J. Senda, and H. Fujimoto: Nippon Kikan Gakkai Rombushu B. Hen, 1989, vol. 55 (511), pp. 814–19.
G. Trapaga and J. Szekely: Metall. Trans. B, 1991, vol. 22B, pp. 901–14.
T. Watanabe, I. Kuribasjachi, T. Honda, and A. Kanzama: Chem. Eng. Sci., 1992, vol. 47 (12), pp. 3059–65.
H. Liu, E.J. Lavernia, and R.H. Rangel: J. Thermal Spray Technol., 1993, vol. 2 (4), pp. 369–77.
H. Liu, E.J. Lavernia, and R.H. Rangel: J. Phys. D. Appl. Phys., 1993, vol. 26, pp. 1900–08.
T. Yoshida, T. Okada, H. Hamatani, and H. Kumavka: Plasma Source Sci. Technol., 1992, vol. 1, pp. 195–201.
M. Bertagnoli, M. Marchese, and G. Jaccuci: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 41–49.
H. Liu, E.J. Lavernia, R.H. Rangel, E. Muhlberger, and A. Sickinger: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 375–80.
M. Pasandideh-Fard and J. Mostaghimi: Plasma Chem. Plasma Proc., 1996, vol. 16 (1), pp. 83S-98S.
M. Pasandideh-Fard and J. Mostaghimi: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 637–46.
G. Montavon, Z.G. Feng, C. Coddet, Z.Q. Feng, and M. Domaszewski: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, pp. 627–33.
M. Bussmann, S.D. Aziz, S. Chandra, and J. Mosthagimi: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 413–18.
M. Pasandidek-Fard, Y.M. Qiao, S. Chandra, and J. Mostaghimi: Phys. Fluids, 1996, vol. 8, pp. 650–59.
M. Pasandidek-Fard, J. Mostaghimi, and S. Chandra: 14th International Symposium on Plasma Chemistry, M. Harabovsky, M. Konrad, and V. Kopecky, eds., Institute of Plasma Physics, Academy of Sciences, Prague, CZ, 1999, vol. CR 4, pp. 2081–87.
V. Pershin, I. Thomason, S. Chandra, and J. Mostaghimi: ISPC 14 Proc., M. Harabovsky, M. Konrad, and V. Kopecky, eds., Institute of Plasma Physics, AS, 1999, vol. CR 4, pp. 2089–94.
A. Vardelle, M. Vardelle, P. Fauchais, and D. Gobin: NATO Ser. E: Appl. Sci., 1995, vol. 282, pp. 95–121.
P. Fauchais, M. Vardelle, A. Vardelle, and B. Pateyron: Proc. Congrès Société Française des Thermiciens, Elsevier, Paris, France, C. Gobbé, ed., 1999 (in French).
G.X. Wang, V. Prasad, S. Sampath, and H. Herman: in Modeling of Casting. Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckermann, eds., TMS, Warrendale, PA, 1998.
G.X. Wang, V. Prasad, S. Sampath, and H. Herman: in Solidification 1998, TMS, Warrendale, PA, 1998.
C. Robert, G.X. Wang, A. Denoirjean, S. Sampath, A. Vardelle, and V. Prasad: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 635–43.
S. Sampath and H. Herman: J. Thermal Spray Technol., 1996, vol. 5 (4), pp. 445–56.
M. Fukumoto, S. Katoh, and I. Okane: Proc. 14th ITSC, A. Ohmori, ed., High Temperature Society of Japan, Osaka, 1995, pp. 353–58.
G. Montavon, C. Coddet, S. Sampath, H. Herman, and C.C. Berndt: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 469–75.
G. Montavon, S. Sampath, C.C. Berndt, H. Herman, and C. Coddet: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 67–74.
K.A. Roberts and T.W. Clyne: Surface Coating Technol., 1990, vol. 41, pp. 103–15.
L. Bianchi, F. Blein, P. Lucchese, M. Vardelle, A. Vardelle, and P. Fauchais: in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 569–74.
L. Bianchi, A. Grimaud, F. Blein, P. Lucchese, and P. Fauchais: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 59–66
M. Vardelle, A. Vardelle, P. Fauchais, and C. Moreau: Meas. Sci. Technol., 1994, vol. 5, pp. 205–12.
S. Fantassi, M. Vardelle, P. Fauchais, and C. Moreau: J. Thermal Spray Technol., 1993, vol. 2 (4), pp. 379–84.
M. Vardelle, A. Vardelle, A.C. Leger, P. Fauchais, and D. Gobin: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 50–58.
C. Moreau, P. Gougeon, and M. Lamontagne: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 25–33.
A.C. Leger, M. Vardelle, A. Vardelle, P. Fauchais, S. Sampath, C.C. Berndt, and H. Herman: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 623–28.
P. Gougeon and C. Moreau: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 619–26.
M. Fukumoto, Y. Huang, and M. Ohtawari: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 401–06.
C. Escure, M. Vardelle, P. Fauchais, and A. Grimaud: Proc. UTSC 2000, ASM International, Materials Park, OH, 2000, pp. 743–52.
C. Mundo, M. Sommerfeld, and C. Tropea: Int. J. Multiphase Flow, 1995, vol. 21 (2), pp. 151–73.
M. Bianchi, A.C. Leger, M. Vardelle, A. Vardelle, and P. Fauchais: Thin Solid Films, 1997, vol. 305, pp. 35–47.
C.J. Li, J.L. Li, W.B. Wang, A. Ohmori, and K. Tani: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 481–87.
P. Fauchais, A.C. Leger, M. Vardelle, and A. Vardelle: Proc. Julian Szekely Memorial Symp. on Materials Processing, H.Y. Sohn, J.W. Evans, and D. Apelian, eds., TMS, Warrendale, PA, 1997, pp. 571–92.
X. Jiang, Y. Wan, H. Herman, and S. Sampath: “Fragmentation of Impinging Molten ZrO2 Droplets on Substrate during Thermal Spray,” 2000, submitted for publication.
L. Bianchi, A. Denoirjean, P. Fauchais, and O. Postel: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 749–55.
L. Bianchi, A. Denoirjean, F. Blein, and P. Fauchais: Thin Solid Films, 1997, vol. 299, pp. 125–35.
J. Pech: Ph.D. Thesis, University of Rouen, Rouen, France, 1999 (in French).
J. Pech, B. Hannoyer, L. Bianchi, P. Fauchais, and A. Denoirjean: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 775–81.
C.J. Li, J.L. Li, and W.B. Wang: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 473–80.
S. Kuroda, T. Dendo, and S. Kitahara: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 75–84.
A. Haddadi: Ph.D. Thesis, University of Limoges, Limoges, 1998 (in French).
A. Haddadi, A. Grimaud, A. Denoirjean, F. Nardou, and P. Fauchais: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 615–22
A. Haddadi, F. Nardou, P. Fauchais, A. Grimaud, and A.C. Leger: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 671–80.
O. Brandt and M. Wandelt: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 799–802.
S.C. Gill and T.W. Clyne: Thin Solid Films, 1994, vol. 250, pp. 172–80.
A.C. Leger, A. Grimaud, P. Fauchais, and C. Catteau: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 891–96.
H. Liao, P. Vaslin, Y. Yang, and C. Coddet: J. Thermal Spray Technol., 1997, vol. 6 (2), pp. 235–41.
Y.C. Tsui, J.A. Thompson, and T.W. Clyne: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1565–70.
Y.C. Tsui and T.W. Clyne: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 813–22.
T.W. Clyne and S.C. Gill: J. Thermal Spray Technol., 1996, vol. 5 (4), pp. 401–18.
M. Mellali, A. Grimaud, A.C. Leger, P. Fauchais, and J. Lu: J. Thermal Spray Technol., 1997, vol. 6 (2), pp. 217–27.
A.C. Leger, A. Grimaud, P. Fauchais, and G. Delluc: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 823–29.
A.C. Leger, A. Haddadi, B. Pateyron, G. Delluc, A. Grimaud, F. Nardou, and P. Fauchais: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 895–903.
S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, and H. Fukanama: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 569–74.
O. Knotek and R. Elsing: Surface Coating Technol., 1987, vol. 32, pp. 261–71.
H. Fukanuma: in Thermal Spray International Advances in Coating Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 767–72.
H. Fukanuma: J. Thermal Spray Technol., 1994, vol. 3 (1), pp. 33–44.
P.Y. Pekshev and I.G. Murzin: Surface Coating Technol, 1993, vol. 56, pp. 199–208.
S. Cirolini, J.H. Harding, and G. Jacucci: Surface Coating Technol., 1991, vol. 48, pp. 137–45.
J.H. Harding, R.A. Mulheran, S. Cirolini, M. Marchese, and G. Jacucci: J. Thermal Spray Technol., 1995, vol. 4 (1), pp. 34–39.
M.P. Kanouf, R.A. Neiser, and T.J. Roemer: J. Thermal Spray Technol., 1998, vol. 7 (2), pp. 219–28.
M.F. Smith, R.A. Neiser, and R.C. Dykhuizen: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 603–08.
J. Ilavsky, A.J. Allen, G.G. Long, and S. Krueger: J. Am. Ceram. Soc., 1997, vol. 80 (3), pp. 733–42.
M. Prystay, P. Gougeon, and C. Moreau: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 517–23.
C. Moreau, S. Boire-Lavigne, and R.G. Saint-Jacques: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1994, pp. 621–26.
S. Sampath, J. Matejicek, C.C. Berndt, H. Herman, A.C. Leger, M. Vardelle, A. Vardelle, and P. Fauchais: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 629–36.
W.D. Swank, J.R. Fincke, D.C. Haggard, G. Irons, and R. Bullock: in Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 319–24.
C.K. Lin and C.C. Berndt: J. Thermal Spray Technol., 1994, vol. 3 (1), pp. 75–104.
M. Mellali, P. Fauchais, and A. Grimaud: Surface Coating Technol., 1996, vol. 81, pp. 275–86.
L. Pejryd, J. Wigren, and N. Hanner: in Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, ed., ASM International, Materials Park, OH, 1997, pp. 445–50.
K. Sampath and E.J. Onesto: in Thermal Spray: Practical Solutions for Engineering Problems, ASM International, Materials Park, OH, 1996, pp. 785–92.
T. Renault, M. Vardelle, A. Grimaud, P. Fauchais, and H. Hoffman: in Thermal Spray Surface Engineering via Applied Research, C.C. Berndt, ed., ASM International, Materials Park, OH, 2000, pp. 1383–91.
E. Lugscheider, F. Ladru, V. Gourlaouen, and C. Gualco: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1583–88.
P. Nylen, I. Fransson, A. Wretland, and N. Martensson: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 693–98.
T. Vivekanandahn, A.R. Kashani, and R. Echenpati: J. Thermal Spray Technol., 1994, vol. 3 (2), pp. 208–18.
R. Bonnet, R. Bolot, and C. Coddet: Proc. United Thermal Spray Conf., E. Lugsheider and P.A. Kammer, ed., ASM International, Materials Park, OH.
J.R. Fincke, W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit, and A.R. Kashani: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 117–22.
J.R. Fincke, W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit, and A.R. Kashani: in Thermal Spray: Science and Technology, C.C. Berndt and S. Sampath, eds., ASM International, Materials Park, OH, 1995, pp. 123–28.
G. Reiners, H. Kreye, and R. Scwetzke: Proc. ITSC 98, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 629–34.
S. Kuroda: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 539–50.
E. Lugsheider, P. Remer, C. Herbst, and G. Barbezat: in Thermal Spray: Practical Solutions for Engineering Problems, ASM International, Materials Park, OH, 1996, pp. 933–40.
BAM Internet Home Page: http://www.bam.de/a-viii/g3viii20.html.
C. Coddet, G. Montavon, S. Ayrault-Costil, O. Freneaux, F. Rigolet, G. Barbezat, F. Foliot, A. Diard, and P. Wazen: J. Thermal Spray Technol., 1999, vol. 8 (2), pp. 235–42.
J.P. Huchin: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, vol. 2, pp. 925–31.
K. Neufuss, P. Chraska, B. Kolman, S. Sampath, and T. Travicek: J. Thermal Spray Technol., 1997, vol. 6 (4), pp. 434–38.
J.A. Brogan, C.C. Berndt, A. Claudon, and C. Coddet: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1173–78.
F. Blein and A. Freslon: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1259–64.
J.S. O’Dell, T.N. McKechnie, and R.R. Holmes: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1271–76.
M.C. Nestler, G. Prenzel, and T. Seitz: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, vol. 2, pp. 1073–78.
C.C. Berndt and E.J. Lavernia: J. Thermal Spray Technol., 1998, vol. 7 (3), pp. 411–36.
M. Schroeder and R. Unger: Adv. Mater. Processes, 1997, vol. 8, pp. 19–21.
G. Irons, W. Kratochvil, M. Schroeder, and C. Broek: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, vol. 1, pp. 39–47.
J. Wigren and L. Pejryd: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, vol. 2, pp. 1531–40.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fauchais, P., Vardelle, A. & Dussoubs, B. Quo vadis thermal spraying?. J Therm Spray Tech 10, 44–66 (2001). https://doi.org/10.1361/105996301770349510
Received:
Issue Date:
DOI: https://doi.org/10.1361/105996301770349510