Abstract
The current state-of-the-art in the development of cellular metal foams is reviewed, with focus on their fabrication, mechanical/thermal/acoustic properties, and potential applications as lightweight panels, energy absorbers, heat exchangers, and acoustic liners. Foam property charts with scaling relations are presented, allowing scoping and selection through the use of material indices.
Similar content being viewed by others
References
Banhart, J., Metallschäume (in German), Bremen: MIT Verlag, Bremen, 1997.
Banhart, J., Ashby, M. F., Fleck, N. A., Metal Foams and Foam Metal Structures, Bremen: MIT Verlag, Bremen, 1999.
Banhart, J., Ashby, M. F., Fleck, N. A., Metal Foams 2001, Bremen: MIT Verlag, 2001.
Evans, A. G., Ultralight Metal Structures, Cambridge: Division of Applied Sciences, Harvard University, 1997/1998/1999.
Shwartz, D. S., Shih, D. S., Evans, A. G. et al., Porous and Cellular Materials for Structural Application, Materials Research Society Proceedings Vol. 521, Warrendale: MRS, 1998.
Ashby, M. F., Evans, A. G., Fleck, N. A. et al., Metals Foams, A Design Guide, Oxford: Butterworth Heinemann, 2000.
He Deping, Ma Liqun, The heat transfer characteristic of foamed metal with open pore, Chinese J. of Mater. Research, 1997, 11(4): 431–434.
He Deping, Yu Xinquan, Effect of pore structure parameters on the non-linear damping capacity of new type foamed aluminum with open pore structure, Chinese J. of Mater. Research, 1997, 11(1): 101–103.
Wu Zhaojin, He Deping, Changes in porosity of foams during foaming process of aluminum during solidification, Chinese Science Bulletin, 2000, 45(18): 213–218.
Yang Donghui, He Deping, Porosity of porous Al alloys, Science in China, Series B, 2001, 44(4): 411–419.
He Deping, Yu Xinquan, Chen Feng, Fabrication, structure and damping capacity of new type P/MCs, Chinese J. of Mater. Research, 1996, 10(4): 347–350.
He Deping, Wen Desun, Zhang Yong, The infiltration process of molten Al into porous media, Chinese J. of Mater. Research, 1997, 12(2): 113–119.
Banhart, J., Manufacture, characterization and application of cellular metals and metal foams, Progress in Materials Science, 2000, 46(3): 559–632.
Gibson, L. J., Ashby, M. F., Cellular Solids, Structure and Properties, 2nd ed., Cambridge: Cambridge University Press, 1997.
Ashby, M. F., Materials Selection in Mechanical Design, Oxford: Butterworth Heinemann, 1999.
CES, The Cambridge Engineering Selector, Cambridge: Granta Design Ltd., 2001, www.grantadesign.com
Lu, T. J., Stone, H. A., Ashby, M. F., Heat transfer in open-cell metal foams, Acta Mater., 1998, 46(10): 3619–3635.
Lu, T. J., Hess, A., Ashby, M. F., Sound absorption in metallic foams, J. Applied Physics Vol., 1999, 85(12): 7528–7539.
Lu, T. J., Chen, F., He, D. P., Sound absorption of cellular metals with semi-open cells, J. Acous. Soc. Am., 2000, 108(4): 1697–1709.
Wang, X. L., Lu, T. J., Optimised acoustic properties of cellular solids, J. Acous. Soc. Am., 1999, 106: 756–765.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ashby, M.F., Lu, T. Metal foams: A survey. Sc. China Ser. B-Chem. 46, 521–532 (2003). https://doi.org/10.1360/02yb0203
Received:
Issue Date:
DOI: https://doi.org/10.1360/02yb0203