Correction: J Eng Appl Sci 71, 152 (2024)
https://doi.org/10.1186/s44147-024-00483-x
Following publication of the original article [1], the authors identified an error in the Funding section. The updated Funding is given below:
Funding:
Fund project: 2023 Jiangsu Provincial Education Science Planning Project, Creating a new model of education in the ceramic industry through the collaboration of three mentors and the integration of industry and education——Research on Innovative Education Curriculum System for the Integration of Industry and Education in Vocational Colleges (C/2023/02/38).
Reference
Wu X, Song J (2024) Three-dimensional artistic design method of ceramic products based on recurrent neural network technology. J Eng Appl Sci 71:152. https://doi.org/10.1186/s44147-024-00483-x
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Wu, X., Song, J. Correction: Three-dimensional artistic design method of ceramic products based on recurrent neural network technology. J. Eng. Appl. Sci. 71, 168 (2024). https://doi.org/10.1186/s44147-024-00505-8
Published:
DOI: https://doi.org/10.1186/s44147-024-00505-8