Abstract
There is an intense worldwide activity in the development of instrumentation for medical diagnosis and bioscreening based on biological labeling and detection of nanoparticles. Based on this profound observation, Hall and ion slip effects on magnetohydrodynamic (MHD) free convective rotating flow of nanofluids in a porous medium past a moving vertical semi-infinite flat plate are investigated. The equations for governing flow are solved analytically by perturbation approximation. The effects of various parameters on the flow are discussed through graphs and tables. The velocity increases with Hall and ion slip parameters. An increase in the convective parameter led to amplify the thermal boundary layer thickness, but when the heat generation parameter is taken into consideration, an opposite effect occurs. The skin friction coefficient increases with an increase in nanoparticle volume fraction and it reduces with increase in Hall and ion slip parameters. Outcomes disclose that the impact of thermal convection of nanoparticles has increased the temperature distribution, which helps in destroying the cancer cells during the drug delivery process.
Similar content being viewed by others
Introduction
The homogeneous mixture of nanoparticles contains two liquids known as nanofluids. Nanoparticles operating in nanofluids are composed of carbon nanotubes, oxides, metals, and carbides. The base is made up of liquid oil, ethylene glycol, and water. The nanofluid was first proposed by Choi [1]. Nanofluids have applications in microelectronics, microfluidics, transportation, biomedical, X-rays, material processing, and scientific measurement. Buongiorno proposed an analytical model for convective transport in nanofluids, which incorporate the effects of Brownian diffusion and thermophoresis. These nanoparticles also hold a lot of significance in the areas of biological and medical applications. Some nanoparticles can bind many drugs, proteins, and target cancer cells. Since many nanoparticles have high atomic numbers that can produce heat, they lead to the treatment of tumor-selective photothermal therapy. Most of the nanoparticles can cure and help in targeting the deadly cancer cells. Flow through porous medium with nanoparticles has significant applications in biomedical science (such as drug delivery and cancer treatment to treat radiotherapy) and chemical engineering (transport of chemicals).
A major interest of convective heat transmission of nanofluids in sciences and engineering is incredibly significant. It is due to various varieties of cool devices like microelectronics and electronic gear and solar power technology. Water, ethylene glycol, and engine oil are heating or cooling agents and play a decisive job in thermal management of many industries with poor thermal conductivity. Recent investigations have given more attention towards thermal convection flows. The rate of thermal energy transmission from one point to another point enhances in several conductive and convection processes. The thermal energy vigorously depends on the variation of heat at the locomotion. However, in thermal radiation, energy transmission between two bodies depends upon absolute heat variation. Thermal radiation has so many applications in biomedical. Because of its application in biomedical and medical treatment, the outcome of thermal radiation with double diffusion has become an important research subject to many researchers. Infrared radiation is one of the most commonly used techniques for the treatment of heat in various parts of the body. Infrared radiation is made up of electromagnetic waves. It lies between the visible light and the microwave. It helps in correcting many skin-related problems. Any radiation entering the skin depends on the composition, vascularity, pigmentation, and wavelength of the radiation. Infrared radiation helps treat heat, directly heating blood vessels in the affected area of the body. It raises the blood supply in the body, which helps in adequate infection of the wound. It raises WBC and removes waste products. It is used in arthritic joints and other inflammatory conditions. Blood flows to different parts of the body. In skin friction, heat transmission occurs through radiation, evaporation, conduction, and circulation. It is known that infrared radiation is made up of electromagnetic waves, and so in the case of radiation heat transfer, the choice is transmitted by electromagnetic wave.
The porous medium is considered homogeneous and is present in local thermal equilibrium with isotropic nanoclides. Blood flow resistance for microbial biofilm and heat transmission around biological tissues, the concept of electronic preservation, hydrodynamic modeling of tissue-engineered materials, and general methods of antibiotic therapy. It describes how biofilm pores affect the hydrodynamics of the media. It describes a model of flow changes in brain aneurysms and recent advances in turbulence estimation methods, modeling passive mass transport processes, and also sheds light on cellular membranes. Further, it also has biochemical impacts and large-scale transport by the skin [2].
In many realistic applications that require a strong magnetic field, there is a need to think both the Hall and ion-slip currents because of the significant effect they have on the vector of the current density and transitively on the magnetic force idiom. The effects of Hall and ion-slip parameters on mixed convective electrically conducting nanofluid flow between two parallel concentric cylinders considering magnetic field has been discussed by Srinivasacharya and Shafeeurrahman [3]. Veera Krishna and Chamkha [4] investigated the diffusion-thermo, radiation-absorption and Hall and ion slip effects on MHD free convective rotating flow of nanofluids (Ag and TiO2) past a semi-infinite permeable moving plate with a constant heat source. Veera Krishna and Chamkha [5] discussed the MHD squeezing flow of a water-based nanofluid through a saturated porous medium between two parallel disks taking Hall current into account. Ram [6] investigated the effects of Hall and ion slip currents on MHD rotating free convective heat-generating flow. Seddeek [7] has discussed the effects of Hall and ion-slip currents and Heat transfer on magneto-micropolar fluid over a non-isothermal stretching sheet with suction and blowing. Seddeek and Abdelmeguid [8] discussed the boundary layer analysis which is used to the effects of Hall and ion-slip currents on steady magneto-micropolar fluid over a horizontal plate. Jha and Apere [9] investigated unsteady MHD Couette flow of a Newtonian fluid between two rotating parallel plates taking hall and ion-slip currents. Uddin and Kumar [10] discussed Hall and ion-slip effect on the thickness of the boundary layer flow of a micropolar fluid over a wedge. Ellahi et al. [11] conducted a theoretical study of the problem of the peristaltic flow of Jeffrey fluid in a non-uniform rectangular duct under the effects of Hall and ion slip. Bhatti et al. [12] discussed the effect of Hall and ion slip on peristaltic blood flow of Eyring Powell in a non-Uniform Porous two-dimensional channel under long wavelength approximation of zero Reynolds number. Veera Krishna and Subba Reddy [13] investigated the transient MHD flow of a reactive second-grade fluid through a porous medium between two infinitely long horizontal parallel plates. Jitendra and Srinivasa [14] investigated Hall and ion slip effects on the convective flow of a rotating fluid. Dileep and Priyanka [15] discussed the Hall effects on MHD viscous electrically conducting fluid flow and heat transfer in a parallel plate channel partially filled with a porous medium with an inclined magnetic field in a rotating system. Veera Krishna et al. [16] discussed the Hall effects on unsteady MHD oscillatory free convective flow of second-grade fluid through porous medium between two vertical plates. Veera Krishna and Chamkha [17] have delivered the unsteady MHD flow of second-grade fluid through porous medium with ramped wall temperature and ramped surface concentration with Hall effects. Veera Krishna et al. [18] have investigated heat and mass transfer on MHD chemically reacting flow of micropolar fluid through a porous medium with Hall effects. Veera Krishna et al. [19] discussed the Soret and Joule effects of MHD mixed convective flow of an incompressible and electrically conducting viscous fluid past an infinite vertical porous plate considering Hall effects. Veera Krishna et al. [20] have discussed Hall effects on MHD peristaltic flow of Jeffrey fluid through porous medium in a vertical stratum. Sara and Bhatti [21] investigated MHD peristaltic flow of a non-Newtonian nanofluid with chemical reaction, Hall and ion-slip currents. Bhatti et al. [22] discussed the effects of heat transfer and Hall current on the sinusoidal motion of solid particles through a planar channel. Waqas et al. [23] investigated to visualize the flow of modified second grade nanofluid with heat, motile microorganisms, and mass transfer rates over stretching surface. Sheikholeslami and Bhatti [24] analyzed magnetic nanofluid transportation under the effect of a non-uniform magnetic field in a porous cavity. The effects of heat and mass transfer on free convective flow of micropolar fluid were studied over an infinite vertical porous plate in the presence of an inclined magnetic field with a constant suction velocity and taking Hall current into account have been discussed by Veera Krishna et al. [25]. Veera Krishna and Chamkha [26] have discussed the systematic solution of time-dependent mean velocity on MHD peristaltic rotating flow of an electrically conducting couple stress fluid in a uniform elastic porous channel.
The aforementioned studies and literature survey bear witness that the analysis of Hall and ion effects of a viscous incompressible electrically conducting nanofluid in an infinite vertical plate with rotation effect has not been presented yet. In order to fill the gap of the existing literature, the Hall and ion slip effects on the unsteady MHD free convective rotating flow of nanofluids in a porous medium past infinite vertical flat plate have been undertaken and discussed.
Formulation and solution of the problem
We have considered Hall and ion slip effects on the unsteady free convective flow of nanofluids (Cu and TiO2) of ambient temperature T∞ over a vertical semi-infinite moving plate entrenched in a homogeneous porous medium under thermal buoyancy effect with a constant heat source and convective boundary conditions. We assumed both the fluid phase and nanoparticles are in a thermal equilibrium state. Also, we assume a uniform shape and sized nanoparticles. The nanoparticles of a smaller size than that of the matrix pores are suspended in nanofluid using either surfactant or surface change technology, preventing the agglomeration and deposition of these on the porous matrix. The porous medium is considered as homogeneous as well as isotropic and is in local thermal equilibrium with the nanofluid. The thermophysical properties of pure water, Cu, and titanium oxide nanoparticles are taken to be constant at a reference temperature (25 °C) and are given in Table 1 [27].
Figure 1 portrays the physical model of the problem. The flow is assumed to be in the x-direction which is obtained along the plate in the ascendant direction and z-axis is normal to it. The entire system rotates with an angular velocity Ω about z-axis. An unvarying peripheral magnetic field B0 is taken to be acting along the z-axis. There is no applied voltage (E = 0). The induced magnetic field is tiny compared to the external magnetic field.
Due to semi-infinite plate surface assumption, all the variables are functions of z and time t only. Under the boundary layer approximations, the basic equations that describe the physical situation are given by
The boundary conditions are
The electron-atom collision frequency is assumed very high, so that Hall and ion-slip currents cannot be neglected. Hence, the Hall and ion-slip currents give rise to the velocity in y-direction. When the strength of the magnetic field is very large, the generalized Ohm’s law is [28]
The component equations of (7) are
On solving Eqs. (8) and (9), we get
Substituting the Eqs. (10) and (11) in (3) and (2), respectively, we obtain
The effective density, thermal diffusivity, heat capacitance, thermal conductivity [29], thermal expansion coefficient, and effective dynamic viscosity [30] of the nanofluid are
where w0 represents the normal velocity at the plate, which is positive for suction and negative for injection. The following dimensionless variables
Using non-dimensional variables, Eqs. (2)–(4) yields (dropping asterisks),
The velocity characteristic Ur is as [31]
The non-dimensional boundary conditions are
We now combining the Eqs. (21) and (21) ( q = u + iv ), we get
The boundary conditions (24) and (25) are as follows:
To find the analytical solutions of the PDE (23), (26) with the boundary conditions (27), (28), then, q and θ as [32],
for ε(< < 1).
Replacing Eqs. (29) and (30) into (26) and (23), respectively, and equating harmonic and non-harmonic terms (neglect the higher poers of ε), we obtain
The corresponding boundary conditions are as follows:
Solving Eqs. (31)–(36) under the boundary conditions (37)–(38), we obtain velocity and temperature as
The skin-friction coefficient Cf and the local Nusselt number Nu are
Where \( {\operatorname{Re}}_x=\frac{U_rx}{v_f} \)is the local Reynolds number. Thus
Where, \( {\alpha}_1=\frac{1+{\beta}_e{\beta}_i}{{\left(1+{\beta}_e{\beta}_i\right)}^2+{\beta}_e^2},{\alpha}_2=\frac{\beta_e}{{\left(1+{\beta}_e{\beta}_i\right)}^2+{\beta}_e^2},{A}_1=\frac{\gamma {\left(1-\phi \right)}^{2.5}{a}_2}{\left({m}_1+\gamma \right)\left({m}_1^2-{S}_1\;{m}_1-{B}_1\right)}, \) \( {a}_1=1-\phi +\phi \left(\frac{\rho_s}{\rho_f}\right),{a}_2=1-\phi +\phi \left(\frac{{\left(\rho \beta \right)}_s}{{\left(\rho \beta \right)}_f}\right),{a}_3=\frac{1}{{\left(1-\varphi \right)}^{2.5}},{a}_4=1-\phi +\phi \left(\frac{{\left(\rho {C}_p\right)}_s}{{\left(\rho {C}_p\right)}_f}\right), \) \( {a}_5=\frac{\Pr \kern0.24em {k}_f{a}_4}{k_{nf}{\left(1-\phi \right)}^{2.5}{a}_1}, \) B1 = M1 + iR1, B2 = M1 + i(R1 + n1), B3 = M1 + i(R1 − n1), \( {M}_1=\left({M}^2\left({\alpha}_1+i{\alpha}_2\right)+\frac{1}{K}\right)\;{\left(1-\phi \right)}^{2.5}, \) \( {m}_1=\frac{1}{2}\left[{S}_1\;{a}_5+\sqrt{{\left({S}_1\;{a}_5\right)}^2+4\;{Q}_H\frac{k_f}{k_{nf}}}\right], \) \( {m}_2=\frac{1}{2}\left[{S}_1+\sqrt{{\left({S}_1\right)}^2+4{B}_1}\right],{m}_3=\frac{1}{2}\left[{S}_1+\sqrt{{\left({S}_1\right)}^2+4{B}_2}\right],{m}_4=\frac{1}{2}\left[{S}_1+\sqrt{{\left({S}_1\right)}^2+4{B}_3}\right], \) n1 = n(1 − ϕ)2.5a1, R1 = R(1 − ϕ)2.5a1, S1 = S(1 − ϕ)2.5a1,
Results and discussion
We become aware that solutions (39) and (40) move towards the solutions for the constant surface temperature as γ → ∞ from the boundary condition (28), which gives θ (0) = 1 as γ → ∞. Further, it is worth mentioning that Eqs. (39) and (40) are reduced to those of Hamad and Pop [31] when βe = βi = 0, K → ∞ (absence of Hall and ion slip effects and non-porous medium) and γ → ∞ (constant surface temperature). We have to discuss the heat transfer characteristics of the flow with nanoparticles that are presented in Figs. 2, 3, and 4 and in Tables 2 and 3. According to Oztop and Abu-Nada [27], we have taken the range of nanoparticle volume fraction 0 ≤ ϕ ≤ 0.2 and Prandtl number Pr = 6.785. We fixed n = 10, nt = π/2 and ε = 0.001, while ϕ = 0.05, βe = 0.3, βi = 1, R = 0.5, K = 0.5, M = 0.5, S = 1, QH = 1, and γ = 2 are varied over a range.
Figure 2a illustrates the influence of the magnetic field parameter M on the velocity distribution for Cu–water and TiO2-water nanofluids. The velocity across the boundary layer reduces with an increase in the magnetic field parameter M and decreases asymptotically to zero at the boundary, which leads to a reduction in the layer thickness due to Lorentz force.
For different values of the permeability parameter K, the velocity distribution on the porous wall is plotted in Fig. 2b for Cu–water and TiO2–water. It is obvious that the increased values of K tend to increase the velocity on the porous wall and so enhance the momentum boundary layer thickness. Figure 2c depicts the velocity with the different values of Hall parameter βe for Cu–water and TiO2–water. Increased values of βe tend to increase the velocity and so enhance the momentum boundary layer thickness. The effect of ion slip parameter βi on velocity as observed in Fig. 2d is similar to the effect of Hall current. The opposite effect is noticed on increasing rotation parameter R, i.e., increasing the rotation reduces the momentum boundary layer thickness (Fig. 2e). Figure 2f denotes the velocity profile with effect from the heat source parameter QH. The magnitude of the velocity increases with increasing QH throughout the fluid region.
Figure 3a and b demonstrates the effect of the suction/injection parameter S on the fluid velocity. The velocity across the boundary layer decreases for S(>0) whereas increases for S(<0) for both nanofluids with nanoparticles Cu and TiO2. So also as S increases, the velocity still approaches the same asymptotic value for large values of z. Thus, the thickness of the boundary layer decreases with an increase in the suction parameter S(>0). A reversal of this trend is noticed with injection parameter for S(<0). Figure 3c illustrates the velocity for an assortment of the nanoparticle volume fraction parameter ϕ. Hence, the velocity of the fluid across the boundary layer decreases with the increase of ϕ. Figure 3d represents the velocity distribution with the different values of convection parameter γ for Cu–water and TiO2–water. Increased values of γ tend to increase the velocity and so accelerate the momentum boundary layer thickness.
Figure 4a displays the temperature profiles for various values of the heat generation parameter QH for both nanofluids with nanoparticles Cu and TiO2. The temperature in the boundary layer region decreases with the increase in the heat generation parameter QH, and as a consequence, the thermal boundary layer thickness decreases. These side views satisfy the far field boundary conditions asymptotically, which bear the mathematical results obtained.
Figure 4b presents a typical profile for temperature with the convective parameter γ for both nanofluids. The temperature increases on increasing γ in the boundary layer region and is maximum at the surface of the plate for both nanoparticles. Thus, by escalating γ, thermal boundary layer thickness enhances. So, we can interpret that the rate of heat transfer increases with increase in convective parameter γ. Figure 4c demonstrates the variation of suction parameter S on temperature for both nanofluids. The magnitude of the temperature reduces with increasing suction parameter S and then thermal boundary layer thickness retarded throughout the fluid region. The influence of nanoparticle volume fraction parameter ϕ on the temperature is shown in Fig. 4d for Cu–water and TiO2–water. The temperature profile increases with the increase in nanoparticle volume fraction parameter ϕ. Hence, the thermal boundary layer thickness improves and tends asymptotically to zero as the distance from the boundary is enhanced.
The variation of the skin friction coefficient Cf and the Nusselt number Nu/Rex with M, K, βe, βi, R, γ, QH, S, and ϕ are shown in Tables 2 and 3, respectively. Table 2 shows that the skin friction coefficient Cf decreases with increasing parameters K, βe, βi, and QH whereas the skin friction coefficient increases with increasing M, R, S, γ, andϕ for both nanofluids with nanoparticles Cu and TiO2. Also, from Table 3, the Nusselt number increases with the increase in all parameters γ, QH, S, and ϕ for both nanofluids with nanoparticles Cu and TiO2. The variation of Nusselt number is much more considerable for nanofluids. It is to be noted that the highest heat transfer rate is obtained for Cu due to high thermal conductivity compared to TiO2. These results are in good agreement with Hamad and Pop [31] (Table 4). Hence, simulation experiments have been carried out under physiological conditions, whose results can be directly compared with clinical data in the literature. System dynamics demonstrates itself to be a powerful and easy-to-use educational tool for biomedical engineering and sciences and is also able to explain the behavior of a physiological system.
Conclusions
Hall and ion slip effects on MHD free convective rotating flow of nanofluids in a porous medium past a moving vertical semi-infinite flat plate are investigated. The conclusions are made as the following. The resultant velocity decreases with an increase in Hartmann number, suction parameter, solid volume fraction of nanoparticles, and rotation parameter but an opposite effect is noticed for Hall and ion slip parameters, injection parameter, and permeability parameter. An increase in convection and solid volume fraction of nanoparticles led to increase the thermal boundary layer thickness but a reverse trend occurs for the heat source parameter. The skin friction coefficient increases with solid volume fraction of nanoparticles, the intensity of the magnetic field, suction parameter, and rotation parameter and reduces with Hall and ion slip parameters. Increasing values of convection parameter, heat source parameter, suction parameter, and solid volume fraction of nanoparticles are to increase the rate of heat transfer for both nanofluids Cu and TiO2. The conclusions unveil that the blow of thermal convection of nanoparticles has increased the temperature distribution, which helps in destroying the cancer cells during the drug delivery process. This model for studying flow through porous media explains the development of bio-convection patterns generated by populations of gravitactic microorganisms in porous media.
Nomenclature
-
u, v, w Velocity components along x, y and z-axis respectively (m/s)
-
Knf Thermal conductivity of nanofluid (W/m.K)
-
Ur The uniform reference velocity (m/s)
-
g Acceleration due to gravity (m/s2),
-
k Permeability of porous medium (m2)
-
T Dimensional temperature (K)
-
Tw Constant temperature (K)
-
T∞ Free stream temperature (K)
-
Q Heat absorption coefficient (W/m2.K)
-
w0 The normal velocity at the plate (m/s)
-
R Rotation parameter
-
M Magnetic field parameter
-
Pr Prandtl number
-
S Suction (S > 0) or injection (S < 0) parameter,
-
K Permeability parameter
-
QH Heat source parameter
-
B0 Magnetic induction (A/m)
-
k Permeability of porous medium (m2)
-
Rex Local Reynolds number
-
Cp Specific heat at constant pressure (J/Kg.K)
-
Nu Nusselt number
-
n Frequency of oscillation (Hz)
-
t Time (s)
-
B Magnetic field vector (A/m)
-
E Electric field (c)
-
V Velocity vector (m/s)
-
J Current density vector (A/m2)
Greek symbols
-
βnf Coefficient of the thermal expansion of nanofluid (K-1)
-
Ω Angular velocity (r/s)
-
θ Non-dimensional temperature
-
γ Convective parameter
-
τ Skin friction
-
αnf Thermal diffusivity of the nanofluid (WmK-1)
-
(ρβ)nf The thermal expansion coefficient of the nanofluid
-
ϕ Solid volume fraction of the nanoparticles
-
νf Kinematic viscosity of nanofluid (m2/s)
-
ε Small constant quantity
-
σ Electrical conductivity of the fluid (S/m)
-
ρnf Density of the nanofluid (Kg/m3)
-
μnf Viscosity of the nanofluid (Pa s)
-
(ρCp)nf Heat capacitance of the nanofluid (J K-1),
-
ωe Cyclotron frequency (e/mB)
-
τe Electron collision time (s)
-
βi ion slip parameter
-
βe Hall parameter
Subscripts
-
f Base fluid
-
nf Nanofluid
-
s Nanosolid particles
Availability of data and materials
Data sharing is not applicable in this article as no datasets were generated or analyzed during the current study.
References
Choi, S.U.S.: Enhancing thermal conductivity of fluids with nanoparticles. Fluids Engg Div. 231, 99–105 (1995)
Vafai Kumbiz: Porous Media: Applications in biological systems and biotechnology. CRC Press. 1st Edition. 1–25 (2010), Taylor Francis Group, Boca Raton, Florida
Srinivasacharya, D., Shafeeurrahman, M.: Hall and ion slip effects on mixed convection flow of nanofluid between two concentric cylinders. J Asso Arab Uni Basic Appl Sci. 24(1), 223–231 (2017). https://doi.org/10.1016/j.jaubas.2017.03.002
Veera Krishna, M., Chamkha, A.J.: Hall and ion slip effects on MHD rotating boundary layer flow of nanofluid past an infinite vertical plate embedded in a porous medium. Results Phys. 15, 102652 (2019). https://doi.org/10.1016/j.rinp.2019.102652
Veera Krishna, M., Chamkha, A.J.: Hall effects on MHD squeezing flow of a water based nano fluid between two parallel disks. J Por Med. 22(2), 209–223 (2019). https://doi.org/10.1615/JPorMedia.2018028721
Ram, P.C.: The effects of Hall and ion slip currents on free convective heat generating flow in a rotating fluid. Int. J. Energy Res. 19(5), 371–376 (1995). https://doi.org/10.1002/er.4440190502
Seddeek, M.A.: The effects of Hall and ion-slip currents on magneto-micropolar fluid and heat transfer over a non-isothermal stretching sheet with suction and blowing. Proc Royal Soc London A. 457, 3039–3050 (2001). https://doi.org/10.1098/rspa.2001.0847
Seddeek, M.A., Abdelmeguid, M.S.: Hall and ion-slip effects on magneto-micropolar fluid with combined forced and free convection in boundary layer flow over a horizontal plate. J Korea Soc Indu Appl Math. 8(2), 51–73 (2004)
Jha, B.K., Apere, C.A.: Combined effect of Hall and ion-slip currents on unsteady MHD couette flows in a rotating system. J Phys Soc Jpn. 79(10), 104401 (2010). https://doi.org/10.1143/JPSJ.79.104401
Uddin, Z., Kumar, M.: Hall and ion-slip effect on MHD boundary layer flow of a micro polar fluid past a wedge. Sci Iran B. 20(3), 467–476 (2013). https://doi.org/10.1016/j.scient.2013.02.013
Ellahi, R., Bhatti, M.M., Pop, I.: Effects of Hall and ion slip on MHD peristaltic flow of Jeffrey fluid in a non-uniform rectangular duct. Int J Num Meth Heat Fluid Flow. 26(6), 1802–1820 (2016). https://doi.org/10.1108/HFF-02-2015-0045
Bhatti, M.M., Abbas, M.A., Rashidi, M.M.: Effect of Hall and ion slip on peristaltic blood flow of Eyring Powell fluid in a non-uniform porous channel. World J Model Simul. 12(4), 268–279 (2016)
Veera Krishna, M., Subba Reddy, G.: Unsteady MHD reactive flow of second grade fluid through porous medium in a rotating parallel plate channel. J. Anal. 27(1), 103–120 (2019). https://doi.org/10.1007/s41478-018-0108-3
Jitendra, K.S., Srinivasa, C.T.: Unsteady natural convection flow of a rotating fluid past an exponential accelerated vertical plate with Hall current, ion-slip and magnetic effect. Multidisci Model Mat Stru. 14(2), 216–235 (2018). https://doi.org/10.1108/MMMS-06-2017-0045
Dillep Singh, C., Priyonk, R.: Hall current and heat transfer effects on MHD flow in a channel partially filled with a porous medium in a rotating system. Turk J Eng Env Sci. 33, 167–184 (2009). https://doi.org/10.3906/muh-0905-6
Veera Krishna, M., Subba Reddy, G., Chamkha, A.J.: Hall effects on unsteady MHD oscillatory free convective flow of second grade fluid through porous medium between two vertical plates. Phy Flu. 30, 023106 (2018). https://doi.org/10.1063/1.5010863
Veera Krishna, M., Chamkha, A.J.: Hall effects on unsteady MHD flow of second grade fluid through porous medium with ramped wall temperature and ramped surface concentration. Phy Flu. 30, 053101 (2018). https://doi.org/10.1063/1.5025542
Veera Krishna, M., Swarnalathamma, B.V., Chamkha, A.J.: Heat and mass transfer on magnetohydrodynamic chemically reacting flow of micropolar fluid through a porous medium with Hall effects. Spe Top Rev Por Med An Inter J. 9(4), 347–364 (2018). https://doi.org/10.1615/SpecialTopicsRevPorousMedia.2018024579
Veera Krishna, M., Swarnalathamma, B.V., Chamkha, A.J.: Investigations of Soret, Joule and Hall effects on MHD rotating mixed convective flow past an infinite vertical porous plate. J Ocean Engg Sci. 4(3), 263–275 (2019). https://doi.org/10.1016/j.joes.2019.05.002
Veera Krishna, M., Bharathi, K., Chamkha, A.J.: Hall effects on MHD peristaltic flow of Jeffrey fluid through porous medium in a vertical stratum. Interfacial Phen Heat Transf. 6(3), 253–268 (2019). https://doi.org/10.1615/InterfacPhenomHeatTransfer.2019030215
Sara, I.A., Bhatti, M.M.: The study of non-Newtonian nanofluid with Hall and ion slip effects on peristaltically induced motion in a non-uniform channel. RSC Adv. 8, 7904–7915 (2018). https://doi.org/10.1039/c7ra13188g
Bhatti, M.M., Ellahi, R., Zeeshan, A., Marin, M., Ijaz, N.: Numerical study of heat transfer and Hall current impact on peristaltic propulsion of particle-fluid suspension with compliant wall properties. Mod Phy Let B. 1950439 (2019). https://doi.org/10.1142/s0217984919504396
Waqas, H., UllahKhan, S., Hassan, M., Bhatti, M.M., Imran, M.: Analysis on the bioconvection flow of modified second grade nanofluid containing gyrotactic microorganisms and nanoparticles. J Mol Liq. 291, 111231 (2019). https://doi.org/10.1016/j.molliq.2019.111231
Sheikholeslami, M., Bhatti, M.M.: Influence of external magnetic source on nanofluid treatment in a porous cavity. J Por Med. 22(12), 1475–1491 (2019). https://doi.org/10.1615/JPorMedia.2019024518
Veera Krishna, M., Anand, P.V.S., Chamkha, A.J.: Heat and mass transfer on free convective flow of a micro-polar fluid through a porous surface with inclined magnetic field and Hall effects. Spe Top Rev Por Med An Inter J. 10(3), 203–223 (2019). https://doi.org/10.1615/SpecialTopicsRevPorousMedia.2018026943
Veera Krishna, M., Chamkha, A.J.: MHD peristaltic rotating flow of a couple stress fluid through a porous medium with wall and slip effects. Spe Top Rev Por Med An Inter J. 10(3), 245–258 (2019). https://doi.org/10.1615/SpecialTopicsRevPorousMedia.2019028609
Oztop, H.F., Abu-Nada, E.: Numerical study of natural convection in partially heated rectangular enclosers with nanofluids. Int J Heat Fluid Flow. 29, 1326–1336 (2008). https://doi.org/10.1016/j.ijheatfluidflow.2008.04.009
Sutton, G., Sherman, A.: Engineering magnetohydrodynamics. Mc Graw Hill, New York (1965)
Maxwell, J.: A treatise on electricity and magnetism, 2nd edn. Oxford University Press, Cambridge (1904)
Brinkman, H.C.: Viscosity of concentrated suspensions and solution. J Chem Phys. 20, 571–581 (1952)
Hamad, M.A.A., Pop, I.: Unsteady MHD free convection flow past a vertical permeable flat plate in a rotating frame of reference with constant heat source in a nanofluid. Heat Mass Transf. 7, 1517–1524 (2011). https://doi.org/10.1007/s00231-011-0816-6
Ganapathy, R.: A note on oscillatory Couette flow in a rotating system. ASME J Appl Mech. 61, 208–209 (1994). https://doi.org/10.1115/1.2901403
Acknowledgements
The authors are grateful and express their sincere thanks to the editor, reviewers, and Team of Journal of Egyptian Mathematical Society for giving suggestions and the improvement of this paper.
Funding
The authors declare that they have no funding.
Author information
Authors and Affiliations
Contributions
MVK carried out the problem designing, performed the computational analysis, participated in the sequence alignment, and drafted the manuscript. AJC participated in its design and coordination and helped to draft the manuscript. The authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Krishna, M.V., Chamkha, A.J. Hall and ion slip effects on Unsteady MHD Convective Rotating flow of Nanofluids—Application in Biomedical Engineering. J Egypt Math Soc 28, 1 (2020). https://doi.org/10.1186/s42787-019-0065-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s42787-019-0065-2