Erratum
Unfortunately, the original version of this article [1] contained an error. The author’s name, ‘Amine M Samoudi’, was spelt incorrectly. This can be found corrected in the author list above.
Reference
Samudi AM, Van Audenhaege K, Vermeeren G, Luc M, Van Holen R, Joseph W. Compatibility of metal additive manufactured tungsten collimator for SPECT/MRI integration. EJNMMI Physics. 2015;2 Suppl 1:A52.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1186/2197-7364-2-S1-A52.
Any correspondence should be addressed to George Loudos, Supplement ‘Proceedings of the 4th PSMR Conference on PET/MR and SPECT/MR’ organizer: gloudos@teiath.gr
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Samoudi, A.M., Van Audenhaege, K., Vermeeren, G. et al. Erratum to: Compatibility of metal additive manufactured tungsten collimator for SPECT/MRI integration. EJNMMI Phys 2, 27 (2015). https://doi.org/10.1186/s40658-015-0131-2
Published:
DOI: https://doi.org/10.1186/s40658-015-0131-2